Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 20th January 2007, 00:31
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
Unhappy The Perfect Setup - CentOS 4.4 (32-bit), How to add Virtual Users?

Hey, first post here. I'm a Linux newb and these walk throughs are great. I was able to get the server up and running within a couple hours. I even got the server working in a RAID0 configuration (Ooooo...Aaaaa) However I would like to host multiple domains and multiple emails per domain. From what I have read the easiest way to do this is with Virtual Domains.

I've found walk throughs for VDs but not for CertOS. Since I'm so green at Linux, I can't figure out how to get it working. I'm pretty sure I've screwed things up pretty good now cause I can't even connect to the SMTP server that I've just made...I don't get a response at all.

I pretty much have my setup as described in the perfect setup, might be some small changes as I've tried to mix this setup with another and another to see if I can get it working. I'm sorry if this question has been asked before, I couldn't find it on google. Also, please bear with me as I'm very basic with linux right now and I can't wrap my head around being able to get this thing working.

Thanks for any help you can provide!


PS - On a side note, I ran into an error during install:

# mysqladmin -h 127.0.0.1 -u root password password
mysqladmin: connect to server at '127.0.0.1' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'


Or in the place of 127.0.0.1 I had the server name but it didn't make a difference. Not sure if that will be part of the problem or not but I'm sure I did something wrong here.

Last edited by joshenry; 20th January 2007 at 00:42.
Reply With Quote
Sponsored Links
  #2  
Old 20th January 2007, 15:18
martinfst martinfst is offline
Senior Member
 
Join Date: Dec 2006
Location: Hilversum, The Netherlands
Posts: 880
Thanks: 1
Thanked 18 Times in 17 Posts
Send a message via MSN to martinfst Send a message via Skype™ to martinfst
Default

Quote:
Originally Posted by joshenry
# mysqladmin -h 127.0.0.1 -u root password password
That should be
Code:
# mysqladmin -h 127.0.0.1 -u root -p password
Or leave 'password' out, and you'll be prompted to enter your password secretly.
Reply With Quote
  #3  
Old 20th January 2007, 20:22
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,748 Times in 2,579 Posts
Default

What are you referring to when you say "virtual users"? Do you think of Postfix with MySQL and virtual users?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #4  
Old 21st January 2007, 05:54
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
Default

That's what I've read it's called. Have mysql as a back end where postfix pulls the info. People seem to call it Virtual Users. Also would like to have dovecot for an imap service like in the perfect setup.

Thanks.
Reply With Quote
  #5  
Old 21st January 2007, 17:03
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,748 Times in 2,579 Posts
Default

Take a look here: http://www.howtoforge.com/fedora_vir..._quota_courier
Should work for CentOS as well.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #6  
Old 21st January 2007, 18:24
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
Default

Sweet, thanks. I'll go through that and see what I get.

Thanks!
Reply With Quote
  #7  
Old 23rd January 2007, 07:39
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
Default

Hey, thanks again for the linky. I think I've got most of it working. However I'm at the following part in the How To:

chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd.amavisd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd.amavisd start

I get through the virus database update but when I try to run /etc/init.d/amavisd start I get:

# service amavisd start
Starting amavisd: DBI version 1.43 required--this is only version 1.40 at /usr/sbin/amavisd line 9153.
[FAILED]



Line 9153 in /usr/sbin/amavisd:

DBI->VERSION(1.43) if $extra_code_sql_base; # need working last_insert_id

I changed it to:

DBI->VERSION(1.40) if $extra_code_sql_base; # need working last_insert_id

Am I going to break anything?

Thanks.



PS - Now for a problem. I'm quite tired right now so I'm going to leave it til tomorrow anyways but I'm pretty much done except two things:

When I create the script for scanning mail then try to execute it "/usr/local/sbin/sa_rules_update.sh" it just drops one line and sits there til I hit Ctrl-C. I've tried recreating the script in case something got missed but no go.

Also, when I try to telnet to the server on smtp it just drops a line and sits there (In Linux I can't exit the line, I have to close the window and restart the session). Does the same thing in windows...locks the window when I telnet to smtp :-/


Well, thanks again everyone.

Last edited by joshenry; 23rd January 2007 at 08:09.
Reply With Quote
  #8  
Old 24th January 2007, 12:57
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,748 Times in 2,579 Posts
Default

Quote:
Originally Posted by joshenry
Line 9153 in /usr/sbin/amavisd:

DBI->VERSION(1.43) if $extra_code_sql_base; # need working last_insert_id

I changed it to:

DBI->VERSION(1.40) if $extra_code_sql_base; # need working last_insert_id

Am I going to break anything?
I don't know if this will break anything.
But you could try to install the newest BDI like this:
Code:
perl -MCPAN -e shell
install DBI
q

Quote:
Originally Posted by joshenry
When I create the script for scanning mail then try to execute it "/usr/local/sbin/sa_rules_update.sh" it just drops one line and sits there til I hit Ctrl-C. I've tried recreating the script in case something got missed but no go.
What the line it shows?
Did you save the script with Unix linebreaks (Windows linebreaks don't work)? Did you disable SELinux?

Quote:
Originally Posted by joshenry
Also, when I try to telnet to the server on smtp it just drops a line and sits there (In Linux I can't exit the line, I have to close the window and restart the session). Does the same thing in windows...locks the window when I telnet to smtp :-/
What's in /etc/postfix/main.cf (please strip out the comments)? What's the output of
Code:
hostname
and
Code:
hostname -f
? What's in /etc/hosts? Any error messages in your mail log?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #9  
Old 24th January 2007, 18:56
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
I don't know if this will break anything.
But you could try to install the newest BDI like this:
Code:
perl -MCPAN -e shell
install DBI
q
Alright, that is done. Didn't seem to make any difference when I restarted the server.

Quote:
Originally Posted by falko
What the line it shows?
Did you save the script with Unix linebreaks (Windows linebreaks don't work)? Did you disable SELinux?
It doesn't show any line, just drops one line and sits there blank.
I edited the script using vi, so I'm assuming it will have Unix linebreaks in it. Here is the file:
Code:
#!/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/71_sare_redirect_pre3.0.0.cf -O 71_sare_redirect_pre3.0.0.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_bayes_poison_nxm.cf -O 70_sare_bayes_poison_nxm.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_html.cf -O 70_sare_html.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_html4.cf -O 70_sare_html4.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_html_x30.cf -O 70_sare_html_x30.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_header0.cf -O 70_sare_header0.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_header3.cf -O 70_sare_header3.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_header_x30.cf -O 70_sare_header_x30.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_specific.cf -O 70_sare_specific.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_adult.cf -O 70_sare_adult.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/72_sare_bml_post25x.cf -O 72_sare_bml_post25x.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/99_sare_fraud_post25x.cf -O 99_sare_fraud_post25x.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_spoof.cf -O 70_sare_spoof.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_random.cf -O 70_sare_random.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_oem.cf -O 70_sare_oem.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_genlsubj0.cf -O 70_sare_genlsubj0.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_genlsubj3.cf -O 70_sare_genlsubj3.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_genlsubj_x30.cf -O 70_sare_genlsubj_x30.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_unsub.cf -O 70_sare_unsub.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/70_sare_uri.cf -O 70_sare_uri.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://mywebpages.comcast.net/mkettler/sa/antidrug.cf -O antidrug.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.timj.co.uk/linux/bogus-virus-warnings.cf -O bogus-virus-warnings.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.yackley.org/sa-rules/evilnumbers.cf -O evilnumbers.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.stearns.org/sa-blacklist/random.current.cf -O random.current.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/88_FVGT_body.cf -O 88_FVGT_body.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/88_FVGT_rawbody.cf -O 88_FVGT_rawbody.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/88_FVGT_subject.cf -O 88_FVGT_subject.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/88_FVGT_headers.cf -O 88_FVGT_headers.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/88_FVGT_uri.cf -O 88_FVGT_uri.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/99_FVGT_DomainDigits.cf -O 99_FVGT_DomainDigits.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/99_FVGT_Tripwire.cf -O 99_FVGT_Tripwire.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.rulesemporium.com/rules/99_FVGT_meta.cf -O 99_FVGT_meta.cf &> /dev/null

cd /etc/mail/spamassassin/ &> /dev/null && /usr/bin/wget http://www.nospamtoday.com/download/mime_validate.cf -O mime_validate.cf &> /dev/null

/etc/init.d/amavis restart &> /dev/null

exit 0
<continued on next post>
Reply With Quote
  #10  
Old 24th January 2007, 18:57
joshenry joshenry is offline
Member
 
Join Date: Jan 2007
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
 
Default

Quote:
Originally Posted by falko
What's in /etc/postfix/main.cf (please strip out the comments)? What's the output of
Code:
hostname
and
Code:
hostname -f
? What's in /etc/hosts? Any error messages in your mail log?
Alright, here is the /etc/postfix/main.cf w/o comments. I've replaced where my hostname and domain will go but the appropriate infomation is in the file. Same with the hostname output.

Code:
#soft_bounce = no
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix
#default_privs = nobody
myhostname = computername
#myhostname = virtual.domain.tld
mydomain = mydomain.com
#myorigin = $myhostname
#myorigin = $mydomain
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
mydestination = computername.mydomain.com, localhost, localhost.localdomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#       mail.$mydomain, www.$mydomain, ftp.$mydomain
unknown_local_recipient_reject_code = 550
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
mynetworks = 127.0.0.0/8, 10.10.10.0/24
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
#relay_domains = $mydestination
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
#in_flow_delay = 1s
#alias_maps = dbm:/etc/aliases
alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
#recipient_delimiter = +
#home_mailbox = Mailbox
home_mailbox = Maildir/
#mail_spool_directory = /var/mail
mail_spool_directory = /var/spool/mail
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
#header_checks = regexp:/etc/postfix/header_checks
#fast_flush_domains = $relay_domains
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20
debug_peer_level = 2
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
debugger_command =
         PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         xxgdb $daemon_directory/$process_name $process_id & sleep 5
sendmail_path = /usr/sbin/sendmail.postfix
newaliases_path = /usr/bin/newaliases.postfix
mailq_path = /usr/bin/mailq.postfix
setgid_group = postdrop
html_directory = no
manpage_directory = /usr/share/man
sample_directory = /usr/share/doc/postfix-2.2.10/samples
readme_directory = /usr/share/doc/postfix-2.2.10/README_FILES

smtpd_sasl_local_domain = $myhostname
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/smtpd.key
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
mailbox_command =
virtual_alias_domains =
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
virtual_mailbox_base = /home/vmail
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
virtual_create_maildirsize = yes
virtual_mailbox_extended = yes
virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
virtual_mailbox_limit_override = yes
virtual_maildir_limit_message = "The user you are trying to reach is over quota."
virtual_overquota_bounce = yes
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $
canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
content_filter = amavis:[127.0.0.1]:10024
receive_override_options = no_address_mappings
Output of "hostname"
Code:
# hostname
computername.mydomain.com
Output of "hostname -f"
Code:
#hostname -f
computername.mydomain.com
Output of "cat /etc/hosts"
Code:
# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1               localhost.localdomain localhost
10.10.10.77             computername.mydomain.com computername
Looks like there is an error about every minute the server is up. The maillog file is littered with the following:
Code:
Jan 24 09:40:56 localhost postfix/proxymap[14078]: fatal: unsupported dictionary type: mysql
Jan 24 09:40:57 localhost postfix/smtpd[11720]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:40:57 localhost postfix/smtpd[11720]: warning: private/proxymap socket: service dict_proxy_open: Success
Jan 24 09:40:57 localhost postfix/cleanup[11697]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:40:57 localhost postfix/cleanup[11697]: warning: private/proxymap socket: service dict_proxy_open: Connection reset by peer
Jan 24 09:40:57 localhost postfix/master[11692]: warning: process /usr/libexec/postfix/proxymap pid 14078 exit status 1
Jan 24 09:40:57 localhost postfix/master[11692]: warning: /usr/libexec/postfix/proxymap: bad command startup -- throttling
Jan 24 09:41:57 localhost postfix/proxymap[14080]: fatal: unsupported dictionary type: mysql
Jan 24 09:41:58 localhost postfix/smtpd[11720]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:41:58 localhost postfix/cleanup[11697]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:41:58 localhost postfix/smtpd[11720]: warning: private/proxymap socket: service dict_proxy_open: Success
Jan 24 09:41:58 localhost postfix/cleanup[11697]: warning: private/proxymap socket: service dict_proxy_open: Connection reset by peer
Jan 24 09:41:58 localhost postfix/master[11692]: warning: process /usr/libexec/postfix/proxymap pid 14080 exit status 1
Jan 24 09:41:58 localhost postfix/master[11692]: warning: /usr/libexec/postfix/proxymap: bad command startup -- throttling
Jan 24 09:42:58 localhost postfix/proxymap[14083]: fatal: unsupported dictionary type: mysql
Jan 24 09:42:59 localhost postfix/smtpd[11720]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:42:59 localhost postfix/cleanup[11697]: warning: premature end-of-input on private/proxymap socket while reading input attribute name
Jan 24 09:42:59 localhost postfix/smtpd[11720]: warning: private/proxymap socket: service dict_proxy_open: Success
Jan 24 09:42:59 localhost postfix/cleanup[11697]: warning: private/proxymap socket: service dict_proxy_open: Connection reset by peer
Jan 24 09:42:59 localhost postfix/master[11692]: warning: process /usr/libexec/postfix/proxymap pid 14083 exit status 1
Jan 24 09:42:59 localhost postfix/master[11692]: warning: /usr/libexec/postfix/proxymap: bad command startup -- throttling
Jan 24 09:43:59 localhost postfix/proxymap[14084]: fatal: unsupported dictionary type: mysql
I'm assuming the "fatal: unsupported dictionary type: mysql" is a big part. I'm going to start searching on that and see what I find.

I think that will be all the info you'll need for now. If you need more please email me at joshenry aT gmail d0t com . Thanks!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Perfect Setup for Centos 4.4 mlz HOWTO-Related Questions 2 3rd January 2007 19:03
Junk mail and spamassassin... sthompson Installation/Configuration 4 27th December 2006 17:11
Perfect CENTOS 4.4 32 Bit Installation and ncftp joeinazusa Installation/Configuration 1 25th December 2006 14:18
The Perfect Setup - CentOS 4.3 (64-bit) kwinnuxbie HOWTO-Related Questions 1 3rd November 2006 17:09
Perfect Virtual Host Setup darcypa HOWTO-Related Questions 5 1st November 2006 18:25


All times are GMT +2. The time now is 00:09.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.