Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 14th July 2010, 18:31
kweitzel kweitzel is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default ISPC3 on CentOS 5.5 64 Bit - Installation fails with Path Errors & DB not imported

Hi,

after having used ISPC2 for about 2 years now, I took the chance of a failed hard drive to give V3 a go now. I prepared a Installation closely following the Perfect Server SetUp, but the base system was installed by the Serverprovider, Server4You. The Firewall and SE Linux are switched off. Unfortunately I failed with several issues:

1) Starting ISPC Installation results in 22 Lines of following error:
Quote:
sh: /which: Datei oder Verzeichnis nicht gefunden
(File or Folder not found)

2) If I go through anyway, at the End I was presended with the error, that the MySQL Data can not be imported. The Database is created correctly by ISPC.

3) On the Perfect Server Installation the SA-Update Command fails:
Quote:
Argument "1.39_01" isn't numeric in subroutine entry at /usr/bin/sa-update line 83.
Now, looking around the Forum I found a couple of users who had the first issue and a common question back to those users was: what is the output of the "echo $PATH" command, which nobody seems to have answered, so I just append it here:

Quote:
/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
I take it there must be something missing, but currently I don't seem to be able to find out what. I tried Version ISPConfig-3.0.2.1 as well as ISPConfig-3.0.2.2

cheers

Klaus

Last edited by kweitzel; 14th July 2010 at 18:35. Reason: Added Firewall and SE Linux Note
Reply With Quote
Sponsored Links
  #2  
Old 14th July 2010, 19:45
veuster veuster is offline
Member
 
Join Date: Jul 2010
Posts: 30
Thanks: 11
Thanked 0 Times in 0 Posts
Default sharing

Just want to share some of my experience.

I recently install my VPS with ISPConfig 3 on CentOS 5.5, it is similar to what u r doing. I also don't know the default install of the server. But I managed to run it with the help of people on this forum.

1. Are you sure you are using CentOS 5.5 64 bit? Because mine is 32 bit. If yours is 32 bit, then you must replace all file name containing x86_64 with i386.
2. If you're doing remove and reinstall of ISPConfig 3, don't forget to delete the dbispconfig in mysql after uninstall procedure. And also reboot after that. Because if not, the installer will say old database still exist and cannot continue.
3. Just to make sure we use the same way to install, I follow the guide from step 7-Install some software, there's no need to follow step 1-6 unless you have specific needs.
4. The only thing that was not installed on my default server is cron. If yours is the same, just do yum install vixie-cron

Ok, that's it from me. If still no result, you can view the install log to find the error.
Reply With Quote
  #3  
Old 14th July 2010, 20:00
kweitzel kweitzel is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for your comments on this, I appreciate you trying to help.

I am sure that I am running 64bit, also check the uname output:

Quote:
Linux localhost.localdomain 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:04:48 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
I started the whole guide at page 3 with the addition of switching off Firewall and SELinux (on page 2). Actually I started a 3 times over by now, just to make sure I didn't make any errors. Just for good measure I will restore the server again to the CentOS 5.5 LAMP Image and start again.

I was mainly thinking, that those errors I found where also reported a couple of times here in the forum, so there should be a solution.

cheers again

Klaus
Reply With Quote
  #4  
Old 14th July 2010, 20:14
dcy dcy is offline
Junior Member
 
Join Date: Jul 2010
Posts: 24
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by kweitzel View Post
Hi,
3) On the Perfect Server Installation the SA-Update Command fails:
Seems perl-Archive-Tar version 1.39.1-1 is the culprit.

Edit your /usr/bin/sa-update and change

Code:
use Archive::Tar 1.23;
to

Code:
use Archive::Tar;
D.
Reply With Quote
  #5  
Old 15th July 2010, 21:48
kweitzel kweitzel is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Cheers for that, but it was "just" a byproduct recording this error in this post. I consider the other one(s) showstopper(s) and was hoping to get a solution there ...

cheers

Klaus
Reply With Quote
  #6  
Old 17th July 2010, 13:57
kweitzel kweitzel is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So ... I take it nobody is able to shed some light on these issues ... shame though.

cheers

Klaus
Reply With Quote
  #7  
Old 17th July 2010, 16:54
dcy dcy is offline
Junior Member
 
Join Date: Jul 2010
Posts: 24
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by kweitzel View Post
So ... I take it nobody is able to shed some light on these issues ... shame though.
cheers
Klaus
Will try to install CentOS 5.5 and try it in a virtual box.

D.
Reply With Quote
  #8  
Old 17th July 2010, 18:38
dcy dcy is offline
Junior Member
 
Join Date: Jul 2010
Posts: 24
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by kweitzel View Post
So ... I take it nobody is able to shed some light on these issues ... shame though.
Well I just did the install on a CentOS 5.5 x64 and it worked flawlessly.

There is something else that makes me wonder.

Can you execute "which" on your machine to see whether 'which' is missing?

D.
Reply With Quote
  #9  
Old 17th July 2010, 20:41
kweitzel kweitzel is offline
Junior Member
 
Join Date: Jul 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Is available: /usr/bin/which

Quote:
Usage: /usr/bin/which [options] [--] programname [...]
Options: --version, -[vV] Print version and exit successfully.
--help, Print this help and exit successfully.
--skip-dot Skip directories in PATH that start with a dot.
--skip-tilde Skip directories in PATH that start with a tilde.
--show-dot Don't expand a dot to current directory in output.
--show-tilde Output a tilde for HOME directory for non-root.
--tty-only Stop processing options on the right if not on tty.
--all, -a Print all matches in PATH, not just the first
--read-alias, -i Read list of aliases from stdin.
--skip-alias Ignore option --read-alias; don't read stdin.
--read-functions Read shell functions from stdin.
--skip-functions Ignore option --read-functions; don't read stdin.
Anyway, I was hoping on the info from the path statement, because this was where all the others stopped asking for help ... could you post your paths output for a crosscheck?

cheers

Klaus
Reply With Quote
  #10  
Old 17th July 2010, 21:19
veuster veuster is offline
Member
 
Join Date: Jul 2010
Posts: 30
Thanks: 11
Thanked 0 Times in 0 Posts
 
Default path

I'm using 32 bit, but the result seem almost the same:

/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

I think sa-update only for updating spamassasin, so it should not affecting the installation.

Maybe it's a permission problem. What user do you use, root or something else?

Why don't you try to check install log? It should be in /var/log/ispconfig3_install.log
Reply With Quote
Reply

Bookmarks

Tags
installation error, ispconfig 3, mysql, path, sa-update

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Failover with VMWare Server - /var/vm isn't the right size.. Bart van Kleef HOWTO-Related Questions 24 30th August 2008 11:00
Installation fails on Ubuntu 8.04 LTS dtech Installation/Configuration 10 19th June 2008 21:30
ispconfig installation errors kcmohan Installation/Configuration 1 9th April 2007 20:14
Perfect CENTOS 4.4 32 Bit Installation and ncftp joeinazusa Installation/Configuration 1 25th December 2006 13:18
ISPCONFIG installation problem with Fedora Core 4 (64 bit) dchowdhu Installation/Configuration 5 25th January 2006 06:21


All times are GMT +2. The time now is 06:42.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.