Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 15th April 2006, 19:00
mlanglois mlanglois is offline
Junior Member
 
Join Date: Jan 2006
Location: Paris, France
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default ISPConfig install error: The PHP binary coming with ISPConfig does not work...

Hi!
I have been a faithful user of ISPConfig for months -- it's just GREAT!
However I have a problem when upgrading to the new version: the setup stopped after a few minutes with this error message:
Code:
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
The server runs SuSE 10, which I installed by faithfully following the "perfect setup" howto (I only had to change the ISPConfig 2.1.2 setup because of my x86_64 system).

I've read that I'm not the only one having this error, but I haven't found the solution. I've tried to run the setup a second time, but now it's asking me more questions, as though it were a new install and not an upgrade... And the same error shows up anyway!

Here are the last lines of the setup:
Code:
Configuring extensions
checking whether to enable LIBXML support... no
checking libxml2 install dir... no
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for pkg-config... no
configure: error: Cannot find OpenSSL's libraries
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
Can anyone help?
Thanks!!
Reply With Quote
Sponsored Links
  #2  
Old 16th April 2006, 15:21
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

Quote:
configure: error: Cannot find OpenSSL's libraries
That's the problem. Did you somehow remove OpenSSL or parts of it?
What's the ouput of
Code:
uname -m
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 16th April 2006, 18:53
mlanglois mlanglois is offline
Junior Member
 
Join Date: Jan 2006
Location: Paris, France
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

uname -m ==> x86_64

When I first installed ISPConfig (v. 2.1.2) on my x86_64 system, I had to remove the --with-openssl parameter in compile_aps/compile on l. 85. But I thought that this new version was compatible with x86_64?

yast2 tells me that openssl, openssl-32bit, openssl-devel, and php5-openssl are installed.
Reply With Quote
  #4  
Old 16th April 2006, 19:15
mlanglois mlanglois is offline
Junior Member
 
Join Date: Jan 2006
Location: Paris, France
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I checked the Perfect ISP Server SuSE Howto, and I noticed that openssl-devel-32bit should be installed. It was not installed on my system (which I can't explain), but anyway I installed it and then ISPConfig installed just fine !!

I was also VERY pleased to see that ISPConfig kept my configuration although I screwed the first upgrade attempt...

Anyway, once again a huge THANKS to you guys!!!
Reply With Quote
  #5  
Old 27th April 2006, 08:35
zoddo zoddo is offline
Junior Member
 
Join Date: Apr 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

i have the same sort of problem. uname -m = i686
Code:
checking for MySQL support... yes
checking for specified location of the MySQL UNIX socket... no
checking for MySQL UNIX socket location... no
configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories
: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your syste               m! The installation routine stops here!

Last edited by zoddo; 27th April 2006 at 08:37.
Reply With Quote
  #6  
Old 27th April 2006, 09:53
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,951
Thanks: 825
Thanked 5,362 Times in 4,209 Posts
Default

Quote:
Originally Posted by zoddo
i have the same sort of problem. uname -m = i686
Code:
configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
The mysql development files are missing. Install the "mysql-dev" package from your linux distribution. Then unpack the ISPConfig tar.gz again and run the setup script.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #7  
Old 27th April 2006, 13:58
zoddo zoddo is offline
Junior Member
 
Join Date: Apr 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

i cant seem to find it on my install cd...

Last edited by zoddo; 27th April 2006 at 14:04.
Reply With Quote
  #8  
Old 27th April 2006, 16:32
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

Which distribution are you using?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #9  
Old 12th July 2006, 16:08
taylan taylan is offline
Junior Member
 
Join Date: Jun 2006
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default insallation problem

I am using Centos 4.3 and i followed perfect setup for centos 4.3

i ended up with this error i tried twice can you help me pls during the installation zlib installation gave error the other steps was ok
thanks
to'
> make: *** [build_crypto] Error 1
> ERROR: Could not make OpenSSL
> cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
> mv: cannot stat `binaries/aps.tar.gz': No such file or directory
> mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 6: syntax error: unexpected end of file
-bash: make[1]:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
> mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
> mv: cannot stat `binaries/cronolog': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/cronosplit': No such file or directory
> mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
> mv: cannot stat `binaries/zip': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/unzip': No such file or directory
> tar: spamassassin.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `spamassassin': No such file or directory
> tar: uudeview.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `uudeview': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 7: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# tar: clamav.tar.gz: Cannot open: No such file or directory
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error is not recoverable: exiting now
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Child returned status 2
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error exit delayed from previous errors
-bash: tar:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `clamav': No such file or directory
> tar: aps.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
> ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
>
Reply With Quote
  #10  
Old 13th July 2006, 14:56
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
 
Default

Quote:
Originally Posted by taylan
> make: *** [build_crypto] Error 1
> ERROR: Could not make OpenSSL
> cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
There must have been another error before this. Please post it.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! qvindesland Installation/Configuration 22 21st May 2007 16:05
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! micko_escalade Installation/Configuration 35 30th March 2007 11:31
The PHP binary coming with ISPConfig does not work properly on your system! lykos Installation/Configuration 3 1st April 2006 07:53
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! xinefnarg Installation/Configuration 2 28th March 2006 16:45
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! max Installation/Configuration 6 13th January 2006 22:07


All times are GMT +2. The time now is 06:37.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.