Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Server Operation

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 17th January 2010, 06:52
atjensen11 atjensen11 is offline
Senior Member
 
Join Date: Dec 2007
Posts: 199
Thanks: 9
Thanked 6 Times in 6 Posts
 
Default Boot Issues with new RAID 5 Array

I have an existing production server with three hard drives installed internally. The first drive is an IDE drive with the OS installed. There are two SATA drives attached to a Rosewill SATA controller in a PCI slot. Two partitions (sda1 and sdb1) are configured in a RAID 1 array. I have an external USB hard drive attached for backups. This device shows up as sdc and is mounted in fstab by the UUID. This system has been booting and running fine for some time.

The Rosewill SATA controller also has two eSATA ports. I recently purchased a Rosewill 5 bay external enclosure. I installed three SATA drives in it. They appeared on the system as sdd, sde, and sdf. I created partitions and configured the drives in a RAID 5 array.

Upon a reboot, I notice two issues. First, the Rosewill controller searches for external drives before the OS begins booting. This process takes a very long time to complete.

The bigger issue is that when the OS does begin loading, a message appears on the console stating the system is waiting for the root operating system. If I power down the Rosewill external enclosure and reboot, the system comes up fine. I can then power on the enclosure and the array appears.

However, I want a reboot to be an automatic process. Does anyone have an idea what is cause the system to hang during boot?
Reply With Quote
Sponsored Links
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Raid 1 on centos won't boot with 1 drive removed treeman Server Operation 2 21st August 2009 04:59
problem with boot from raid - How To Set Up Software RAID1 on a running system (etch) Marsbar HOWTO-Related Questions 5 6th September 2008 23:32
Debian: Failed Raid5 Array & Kernal Panic snowfly Installation/Configuration 0 29th August 2007 12:52
log files, rotation and emailing them hairydog2 General 65 11th October 2006 13:18
phpMyAdmin - panick attack md@waw.co.uk General 6 3rd September 2006 20:52


All times are GMT +2. The time now is 10:43.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.