Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 8th December 2009, 10:28
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default Unsupported memory accesses after HowTo Installing Xen On An Ubuntu 8.04

HowTo used:
http://www.howtoforge.com/ubuntu-8.0...u-repositories
on:
Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)

Dear all,

Despite of moving /lib/tls
Code:
mv /lib/tls /lib/tls.disabled
I get this warning:
Code:
***************************************************************

***************************************************************

** WARNING: Currently emulating unsupported memory accesses **

** in /lib/tls glibc libraries. The emulation is **

** slow. To ensure full performance you should **

** install a 'xen-friendly' (nosegneg) version of **

** the library, or disable tls support by executing **

** the following as root: **

** mv /lib/tls /lib/tls.disabled **

** Offending process: init (pid=2710) **

***************************************************************

***************************************************************
I looked at https://bugs.launchpad.net/ubuntu/+s...bc/+bug/246625
and https://bugs.launchpad.net/ubuntu/+s...ux/+bug/260825 :
I re-enabled /tls/tls and tried to load xen-friendly library but no luck (see below, no nosegneg for libc). I also tried version 2.6.24-19-xen and changed to hwcap 0 nosegneg but still no luck... Any suggestions (extra info see below)?

Regards, Peter

Info:
Code:
uname -r
2.6.24-26-xen
Code:
cat /proc/version_signature
Ubuntu 2.6.24-4.6-generic
Code:
ls /boot
abi-2.6.24-24-server initrd.img-2.6.24-26-xen.bak
config-2.6.24-19-xen lost+found
config-2.6.24-24-server memtest86+.bin
config-2.6.24-26-xen System.map-2.6.24-19-xen
grub
System.map-2.6.24-24-server
initrd.img-2.6.24-19-xen System.map-2.6.24-26-xen
initrd.img-2.6.24-19-xen.bak vmlinuz-2.6.24-19-xen
initrd.img-2.6.24-24-server vmlinuz-2.6.24-24-server
initrd.img-2.6.24-24-server.bak vmlinuz-2.6.24-26-xen
initrd.img-2.6.24-26-xen xen-3.2.gz
Code:
ldd /sbin/init 
linux-gate.so.1 => (0xf57fe000)
libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7e55000)
/lib/ld-linux.so.2 (0xb7fab000)
Code:
ldconfig -p

libusb-0.1.so.4 (libc6) => /usr/lib/libusb-0.1.so.4
        libuniquewm-1.0.so.0 (libc6) => /usr/lib/libuniquewm-1.0.so.0
        libulockmgr.so.1 (libc6) => /lib/libulockmgr.so.1
        libtiff.so.4 (libc6) => /usr/lib/libtiff.so.4
        libticw.so.5 (libc6) => /lib/libticw.so.5
        libtic.so.5 (libc6) => /lib/libtic.so.5
        libthread_db.so.1 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libthread_db.so.1
        libthread_db.so.1 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libthread_db.so.1
        libthread_db.so.1 (libc6, OS ABI: Linux 2.6.8) => /lib/libthread_db.so.1
        libthai.so.0 (libc6) => /usr/lib/libthai.so.0
        libtasn1.so.3 (libc6) => /usr/lib/libtasn1.so.3
        libsysfs.so.2 (libc6) => /lib/libsysfs.so.2
        libstdc++.so.6 (libc6) => /usr/lib/libstdc++.so.6
        libssl.so.0.9.8 (libc6, hwcap: 0x0008000000008000) => /usr/lib/i686/cmov/libssl.so.0.9.8
        libssl.so.0.9.8 (libc6, hwcap: 0x0004000000000000) => /usr/lib/i586/libssl.so.0.9.8
        libssl.so.0.9.8 (libc6, hwcap: 0x0002000000000000) => /usr/lib/i486/libssl.so.0.9.8
        libssl.so.0.9.8 (libc6) => /usr/lib/libssl.so.0.9.8
        libss.so.2 (libc6) => /lib/libss.so.2
        libsqlite3.so.0 (libc6) => /usr/lib/libsqlite3.so.0
        libslang.so.2 (libc6) => /lib/libslang.so.2
        libsigc-2.0.so.0 (libc6) => /usr/lib/libsigc-2.0.so.0
        libsepol.so.1 (libc6) => /lib/libsepol.so.1
        libselinux.so.1 (libc6) => /lib/libselinux.so.1
        libsasl2.so.2 (libc6) => /usr/lib/libsasl2.so.2
        libruby1.8.so.1.8 (libc6) => /usr/lib/libruby1.8.so.1.8
        librt.so.1 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/librt.so.1
        librt.so.1 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/librt.so.1
        librt.so.1 (libc6, OS ABI: Linux 2.6.8) => /lib/librt.so.1
        libresolv.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libresolv.so.2
        libresolv.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libresolv.so.2
        libresolv.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libresolv.so.2
        libreadline.so.5 (libc6) => /lib/libreadline.so.5
        libpython2.5.so.1.0 (libc6) => /usr/lib/libpython2.5.so.1.0
        libpython2.5.so (libc6) => /usr/lib/libpython2.5.so
        libpthread.so.0 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libpthread.so.0
        libpthread.so.0 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libpthread.so.0
        libpthread.so.0 (libc6, OS ABI: Linux 2.6.8) => /lib/libpthread.so.0
        libproc-3.2.7.so (libc6) => /lib/libproc-3.2.7.so
        libpopt.so.0 (libc6) => /lib/libpopt.so.0
        libpng12.so.0 (libc6) => /usr/lib/libpng12.so.0
        libpixman-1.so.0 (libc6) => /usr/lib/libpixman-1.so.0
        libperl.so.5.8 (libc6) => /usr/lib/libperl.so.5.8
        libpcreposix.so.3 (libc6) => /usr/lib/libpcreposix.so.3
        libpcre.so.3 (libc6) => /usr/lib/libpcre.so.3
        libpcprofile.so (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libpcprofile.so
        libpcprofile.so (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libpcprofile.so
        libpcprofile.so (libc6, OS ABI: Linux 2.6.8) => /lib/libpcprofile.so
        libpcap.so.0.8 (libc6) => /usr/lib/libpcap.so.0.8
        libparted-1.7.so.1 (libc6) => /lib/libparted-1.7.so.1
        libpangoxft-1.0.so.0 (libc6) => /usr/lib/libpangoxft-1.0.so.0
        libpangox-1.0.so.0 (libc6) => /usr/lib/libpangox-1.0.so.0
        libpangoft2-1.0.so.0 (libc6) => /usr/lib/libpangoft2-1.0.so.0
        libpangocairo-1.0.so.0 (libc6) => /usr/lib/libpangocairo-1.0.so.0
        libpango-1.0.so.0 (libc6) => /usr/lib/libpango-1.0.so.0
        libpanelw.so.5 (libc6) => /usr/lib/libpanelw.so.5
        libpanel.so.5 (libc6) => /usr/lib/libpanel.so.5
        libpamc.so.0 (libc6) => /lib/libpamc.so.0
        libpam_misc.so.0 (libc6) => /lib/libpam_misc.so.0
        libpam.so.0 (libc6) => /lib/libpam.so.0
        libopencdk.so.10 (libc6) => /usr/lib/libopencdk.so.10
        libopcodes-2.18.0.20080103.so (libc6) => /usr/lib/libopcodes-2.18.0.20080103.so
        libntfs-3g.so.23 (libc6) => /lib/libntfs-3g.so.23
        libnss_nisplus.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_nisplus.so.2
        libnss_nisplus.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_nisplus.so.2
        libnss_nisplus.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_nisplus.so.2
        libnss_nis.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_nis.so.2
        libnss_nis.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_nis.so.2
        libnss_nis.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_nis.so.2
        libnss_hesiod.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_hesiod.so.2
        libnss_hesiod.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_hesiod.so.2
        libnss_hesiod.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_hesiod.so.2
        libnss_files.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_files.so.2
        libnss_files.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_files.so.2
        libnss_files.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_files.so.2
        libnss_dns.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_dns.so.2
        libnss_dns.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_dns.so.2
        libnss_dns.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_dns.so.2
        libnss_compat.so.2 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnss_compat.so.2
        libnss_compat.so.2 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnss_compat.so.2
        libnss_compat.so.2 (libc6, OS ABI: Linux 2.6.8) => /lib/libnss_compat.so.2
        libnsl.so.1 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libnsl.so.1
        libnsl.so.1 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libnsl.so.1
        libnsl.so.1 (libc6, OS ABI: Linux 2.6.8) => /lib/libnsl.so.1
        libnewt.so.0.52 (libc6) => /usr/lib/libnewt.so.0.52
        libncursesw.so.5 (libc6) => /lib/libncursesw.so.5
        libncurses.so.5 (libc6) => /lib/libncurses.so.5
        libmenuw.so.5 (libc6) => /usr/lib/libmenuw.so.5
        libmenu.so.5 (libc6) => /usr/lib/libmenu.so.5
        libmemusage.so (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libmemusage.so
        libmemusage.so (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libmemusage.so
        libmemusage.so (libc6, OS ABI: Linux 2.6.8) => /lib/libmemusage.so
        libmagic.so.1 (libc6) => /usr/lib/libmagic.so.1
        libm.so.6 (libc6, hwcap: 0x8028000000000000, OS ABI: Linux 2.6.8) => /lib/tls/i686/nosegneg/libm.so.6
        libm.so.6 (libc6, hwcap: 0x8008000000008000, OS ABI: Linux 2.6.8) => /lib/tls/i686/cmov/libm.so.6
        libm.so.6 (libc6, OS ABI: Linux 2.6.8) => /lib/libm.so.6
        liblzo2.so.2 (libc6) => /usr/lib/liblzo2.so.2
        liblwres.so.30 (libc6) => /usr/lib/liblwres.so.30
        libldap_r-2.4.so.2 (libc6) => /usr/lib/libldap_r-2.4.so.2
        liblber-2.4.so.2 (libc6) => /usr/lib/liblber-2.4.so.2
        libk5crypto.so.3 (libc6) => /usr/lib/libk5crypto.so.3
        libkrb5support.so.0 (libc6) => /usr/lib/libkrb5support.so.0
        libkrb5.so.3 (libc6) => /usr/lib/libkrb5.so.3
        libkrb4.so.2 (libc6) => /usr/lib/libkrb4.so.2
        libkeyutils.so.1 (libc6) => /lib/libkeyutils.so.1
        libjpeg.so.62 (libc6) => /usr/lib/libjpeg.so.62
        libiw.so.29 (libc6) => /lib/libiw.so.29
        libisccfg.so.30 (libc6) => /usr/lib/libisccfg.so.30
        libisccc.so.30 (libc6) => /usr/lib/libisccc.so.30
        libisc.so.35 (libc6) => /usr/lib/libisc.so.35
        libidn.so.11 (libc6) => /usr/lib/libidn.so.11
        libhistory.so.5 (libc6) => /lib/libhistory.so.5
        libhal.so.1 (libc6) => /usr/lib/libhal.so.1
        libhal-storage.so.1 (libc6) => /usr/lib/libhal-storage.so.1
        libgtk-x11-2.0.so.0 (libc6) => /usr/lib/libgtk-x11-2.0.so.0
        libgthread-2.0.so.0 (libc6) => /usr/lib/libgthread-2.0.so.0
        libgssapi_krb5.so.2 (libc6) => /usr/lib/libgssapi_krb5.so.2
        libgpm.so.1 (libc6) => /usr/lib/libgpm.so.1
        libgpg-error.so.0 (libc6) => /lib/libgpg-error.so.0
        libgobject-2.0.so.0 (libc6) => /usr/lib/libgobject-2.0.so.0
        libgnutls.so.13 (libc6) => /usr/lib/libgnutls.so.13
        libgnutls-openssl.so.13 (libc6) => /usr/lib/libgnutls-openssl.so.13
        libgnutls-extra.so.13 (libc6) => /usr/lib/libgnutls-extra.so.13
        libgnomevfs-2.so.0 (libc6) => /usr/lib/libgnomevfs-2.so.0
        libgnomeui-2.so.0 (libc6) => /usr/lib/libgnomeui-2.so.0
        libgnomecanvas-2.so.0 (libc6) => /usr/lib/libgnomecanvas-2.so.0
        libgnome-2.so.0 (libc6) => /usr/lib/libgnome-2.so.0
        libgnome-keyring.so.0 (libc6) => /usr/lib/libgnome-keyring.so.0
        libgmodule-2.0.so.0 (libc6) => /usr/lib/libgmodule-2.0.so.0
        libglib-2.0.so.0 (libc6) => /usr/lib/libglib-2.0.so.0
        libglade-2.0.so.0 (libc6) => /usr/lib/libglade-2.0.so.0
        libgio-2.0.so.0 (libc6) => /usr/lib/libgio-2.0.so.0
        libgdk_pixbuf_xlib-2.0.so.0 (libc6) => /usr/lib/libgdk_pixbuf_xlib-2.0.so.0
        libgdk_pixbuf-2.0.so.0 (libc6) => /usr/lib/libgdk_pixbuf-2.0.so.0
        libgdk-x11-2.0.so.0 (libc6) => /usr/lib/libgdk-x11-2.0.so.0
        libgdbm_compat.so.3 (libc6) => /usr/lib/libgdbm_compat.so.3
        libgdbm.so.3 (libc6) => /usr/lib/libgdbm.so.3
        libgcrypt.so.11 (libc6) => /lib/libgcrypt.so.11
        libgconf-2.so.4 (libc6) => /usr/lib/libgconf-2.so.4
        libgccpp.so.1 (libc6) => /usr/lib/libgccpp.so.1
        libgcc_s.so.1 (libc6) => /lib/libgcc_s.so.1
        libgc.so.1 (libc6) => /usr/lib/libgc.so.1
        libgamin-1.so.0 (libc6) => /usr/lib/libgamin-1.so.0
        libgailutil.so.18 (libc6) => /usr/lib/libgailutil.so.18
        libfusion-1.0.so.0 (libc6) => /usr/lib/libfusion-1.0.so.0
        libfuse.so.2 (libc6) => /lib/libfuse.so.2
        libfsimage.so.1.0 (libc6) => /usr/lib/libfsimage.so.1.0
        libfribidi.so.0 (libc6) => /usr/lib/libfribidi.so.0
        libfreetype.so.6 (libc6) => /usr/lib/libfreetype.so.6
        libformw.so.5 (libc6) => /usr/lib/libformw.so.5
        libform.so.5 (libc6) => /usr/lib/libform.so.5
        libfontconfig.so.1 (libc6) => /usr/lib/libfontconfig.so.1
        libflask.so.1.0 (libc6) => /usr/lib/libflask.so.1.0

Last edited by petervanbussel; 9th December 2009 at 14:54.
Reply With Quote
Sponsored Links
  #2  
Old 9th December 2009, 14:37
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Which tutorial (URL) did you use?
Which Ubuntu version do you use?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 9th December 2009, 14:50
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default

Hi Falko,

I used HowtTo:

http://www.howtoforge.com/ubuntu-8.0...u-repositories

on

Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)

Regards, Peter
Reply With Quote
  #4  
Old 10th December 2009, 16:26
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Did you do this...
Code:
mv /lib/tls /lib/tls.disabled
... on the host and also in the guest?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 10th December 2009, 19:01
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default

Hi Falko,

Look at the top of my posting (honestly, not in the vm...)! The error is there before the vm is startrd up. So I tried https://bugs.launchpad.net/ubuntu/+s...ux/+bug/260825, because that should be the better solution, but no avail.

Regards, Peter
__________________
Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)

Last edited by petervanbussel; 10th December 2009 at 19:09.
Reply With Quote
  #6  
Old 11th December 2009, 13:05
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

What's the output of
Code:
ls -l /lib/tls*
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 13th December 2009, 14:29
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default

Code:
# ls -l /lib/tls*
total 4
drwxr-xr-x 4 root root 4096 2009-12-13 14:11 i686
__________________
Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)

Last edited by petervanbussel; 13th December 2009 at 16:13.
Reply With Quote
  #8  
Old 13th December 2009, 19:43
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default

Hi Falko,

Like very often syntax seems to be the key... This is what I found: http://www.mail-archive.com/ubuntu-b...sg1123113.html. 'hwcap 0 nosegneg' is to be written in /etc/ld.so.conf.d/libc6-xen.conf and not in /etc/ld.so.conf.d/xen.conf:

This is what I did:
Code:
apt-get install -y libc6-xen
echo 'hwcap 0 nosegneg' > /etc/ld.so.conf.d/libc6-xen.conf
apt-get remove -y libc6-i686 || true
ldconfig
and tls in place:
Code:
mv /lib/tls.disabled /lib/tls
After loading Hirano Takahito's kernel and rebooting (no more ''WARNING: Currently emulating unsupported memory accesses''!) Hurray!
Code:
uname -r
2.6.24-19-xen
Code:
cat /proc/version_signature
Ubuntu 2.6.24-4.6-generic
Code:
ldd /bin/bash
linux-gate.so.1 =>  (0xf57fe000)
libncurses.so.5 => /lib/libncurses.so.5 (0xb7f93000)
libdl.so.2 => /lib/libdl.so.2 (0xb7f8f000)
libc.so.6 => /lib/libc.so.6 (0xb7e56000)
/lib/ld-linux.so.2 (0xb7fca000)
Everything looks fine to me (but who am I?). Falko can you please check?!

Regards, Peter
__________________
Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)

Last edited by petervanbussel; 13th December 2009 at 19:46.
Reply With Quote
The Following User Says Thank You to petervanbussel For This Useful Post:
falko (14th December 2009)
  #9  
Old 19th December 2009, 13:24
petervanbussel petervanbussel is offline
Junior Member
 
Join Date: Dec 2009
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default

Hi Falko,

Another problem occurs though:
Code:
apt-get update
[...]
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
Code:
dpkg --configure -a
Instellen van libc6 (2.7-10ubuntu5) ...

Processing triggers for libc6 ...
ldconfig deferred processing now taking place
/sbin/ldconfig.real: /etc/ld.so.conf.d/xen.conf:1: hwcap index 0 already defined as nosegneg
dpkg: subproces post-installation script gaf een foutwaarde 1 terug
(hope you can understand the Dutch error messages, if not please let me know)

Any suggestions?

Regards, Peter
__________________
Ubuntu 8.04. Server LTS on SuperMicro 5013C-MTB (P4, 4GB, RAID1(soft)2x250GB)
Reply With Quote
  #10  
Old 20th December 2009, 13:22
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
 
Default

Hm... To be honest, I have no idea...
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
XEN Question (Ubuntu 8.04 64bit) Milleman HOWTO-Related Questions 5 14th August 2009 13:27
Unbale to login to Postfix from webmail wasimriz HOWTO-Related Questions 5 6th April 2009 13:49
Ubuntu 8.04 LTS - RAID 1 + LVM + XEN atjensen11 HOWTO-Related Questions 1 20th January 2009 20:35
Installing Xen On An Ubuntu 8.04 (Hardy Heron) Server : Host network nonfunctional breshead HOWTO-Related Questions 3 9th May 2008 00:28
Installing Xen On An Ubuntu Feisty Fawn Server From The Ubuntu Repositories: On 7.10 Kai HOWTO-Related Questions 2 2nd January 2008 21:09


All times are GMT +2. The time now is 05:43.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.