Prev Previous Post   Next Post Next
  #1  
Old 30th March 2006, 16:58
hotchilli hotchilli is offline
Member
 
Join Date: Jan 2006
Posts: 60
Thanks: 2
Thanked 0 Times in 0 Posts
Default segmentation fault

ust installed sarge on hda1 as per your how toand get error with segmentation fault
(6) journal block device drive loaded

pivot_root: no such file or directory
/sbin/init: 432 cannot open dev/console no such file

kernnel panic attempted to kill init


hda1 sarge (ext3)

hda2 swap

had3 ubuntu (ext3)

hda4 extentended

hda5 swap
---------------------------------------------------------------hotchlli


fist of all here is the disk layout

Disk /dev/hda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hda1 * 1 2690 21607393+ 83 Linux
/dev/hda2 2691 2809 955867+ 82 Linux swap / Solaris
/dev/hda3 2810 4776 15799927+ 83 Linux
/dev/hda4 4777 4864 706860 5 Extended
/dev/hda5 4777 4864 706828+ 82 Linux swap / Solaris


There was a small fat partition of 2mb with the various files which came built into the labtop it was some files to aid the installation of XP home in my acer traelmate 2200 this was /dev/had1 on /dev/hda2 there was a xp home os fat32.
Ubuntu on /dev/hda3 has been intalled from BB 5-10 CD about january 2005
no probs with install.

It was all controled by ubuntu grub but now sarge grub is installed can boot
into ubuntu no problems below is menu.list for ubuntu and below that is menu .list for sarge.
I can start the boot into sarge but stops at the point where I get the error message as posted
in my fist post of this thread.

#
Lex1:
--------------------------------------------------------------
ubuntu menu list
# menu.lst - See: grub(, info grub, update-grub()
# grub-install(), grub-floppy(),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specifiv kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
# kopt=root=/dev/hda3 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,2)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single

## nonaltoption boot targets option
## This option controls options to pass to only the
## primary kernel menu item.
## You can have ONLY one nonaltoptions line
# nonaltoptions=quiet splash

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## ## End Default Options ##

title Ubuntu, kernel 2.6.12-10-386
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-10-386 root=/dev/hda3 ro quiet splash
initrd /boot/initrd.img-2.6.12-10-386
savedefault
boot

title Ubuntu, kernel 2.6.12-10-386 (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-10-386 root=/dev/hda3 ro single
initrd /boot/initrd.img-2.6.12-10-386
boot

title Ubuntu, kernel 2.6.12-9-386
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-9-386 root=/dev/hda3 ro quiet splash
initrd /boot/initrd.img-2.6.12-9-386
savedefault
boot

title Ubuntu, kernel 2.6.12-9-386 (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.12-9-386 root=/dev/hda3 ro single
initrd /boot/initrd.img-2.6.12-9-386
boot

title Ubuntu, memtest86+
root (hd0,2)
kernel /boot/memtest86+.bin
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda2
title Microsoft Windows XP Home Edition
root (hd0,1)
savedefault
makeactive
chainloader +1
---------------------------------------------------------------------------------

the sarge grub print out is in segmentation fault part 2 as will not
fit into one post

hc
Reply With Quote
Sponsored Links
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISP Services wouldn't restart any service, possibly Domain Host configuration issue. Kamran Shah Installation/Configuration 20 17th August 2006 18:33
Apache::Asp fault ColdDoT Server Operation 4 25th March 2006 10:14
Segmentation Fault during Installation 7son7son Installation/Configuration 1 23rd February 2006 23:47
Segmentation fualt error during compile kird03 Installation/Configuration 17 6th January 2006 11:29
PHP version... ctroyp Installation/Configuration 102 10th November 2005 14:24


All times are GMT +2. The time now is 05:05.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.