Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 12th February 2009, 19:50
steve51184 steve51184 is offline
Member
 
Join Date: Mar 2008
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
Default can't help ispconfig to install please help

been trying to ispconfig to install but just can't get it to work.. i have a ubuntu 8.04 system with all required software but i get this error after it "installs"

Quote:
./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapp er': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or d irectory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or d irectory
Restarting some services...
* Stopping Postfix Mail Transport Agent postfix [ OK ]
* Starting Postfix Mail Transport Agent postfix [ OK ]
./setup2: line 1163: /etc/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install q uota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://myip:81

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /home/install_ispconfig/compile_aps/../..: No such file or directory
(root@H045)-(/home/install_ispconfig) $
Reply With Quote
Sponsored Links
  #2  
Old 12th February 2009, 20:57
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,717
Thanks: 820
Thanked 5,322 Times in 4,175 Posts
Default

There must be errors on the screen before the part you posted. Please post the first error message. The best way to prevent these problems is to follow exactly the ispconfig installation instructions for ubuntu 8.04
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 12th February 2009, 21:52
steve51184 steve51184 is offline
Member
 
Join Date: Mar 2008
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
Default

i followed it exactly.. here's all that i can copy before it got cut of in putty:

Quote:
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/md4'
making install in crypto/md5...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/md5'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/md5'
making install in crypto/sha...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/sha'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/sha'
making install in crypto/hmac...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/hmac'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/hmac'
making install in crypto/ripemd...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ripemd'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ripemd'
making install in crypto/des...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/des'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/des'
making install in crypto/aes...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/aes'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/aes'
making install in crypto/rc2...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rc2'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rc2'
making install in crypto/rc4...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rc4'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rc4'
making install in crypto/idea...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/idea'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/idea'
making install in crypto/bf...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bf'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bf'
making install in crypto/cast...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/cast'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/cast'
making install in crypto/bn...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bn'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bn'
making install in crypto/ec...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ec'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ec'
making install in crypto/rsa...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rsa'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rsa'
making install in crypto/dsa...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dsa'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dsa'
making install in crypto/ecdsa...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ecdsa'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ecdsa'
making install in crypto/dh...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dh'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dh'
making install in crypto/ecdh...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ecdh'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ecdh'
making install in crypto/dso...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dso'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/dso'
making install in crypto/engine...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/engine'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/engine'
making install in crypto/buffer...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/buffer'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/buffer'
making install in crypto/bio...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bio'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/bio'
making install in crypto/stack...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/stack'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/stack'
making install in crypto/lhash...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/lhash'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/lhash'
making install in crypto/rand...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rand'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/rand'
making install in crypto/err...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/err'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/err'
making install in crypto/evp...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/evp'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/evp'
making install in crypto/asn1...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/asn1'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/asn1'
making install in crypto/pem...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pem'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pem'
making install in crypto/x509...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/x509'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/x509'
making install in crypto/x509v3...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/x509v3'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/x509v3'
making install in crypto/conf...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/conf'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/conf'
making install in crypto/txt_db...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/txt_db'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/txt_db'
making install in crypto/pkcs7...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pkcs7'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pkcs7'
making install in crypto/pkcs12...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pkcs12'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pkcs12'
making install in crypto/comp...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/comp'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/comp'
making install in crypto/ocsp...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ocsp'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ocsp'
making install in crypto/ui...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ui'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/ui'
making install in crypto/krb5...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/krb5'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/krb5'
making install in crypto/store...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/store'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/store'
making install in crypto/pqueue...
make[2]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pqueue'
make[2]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto/pqueue'
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/crypto'
making install in ssl...
make[1]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/ssl'
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/ssl'
making install in engines...
make[1]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/engines'
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/engines'
making install in apps...
make[1]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/apps'
installing openssl
installing CA.sh
installing CA.pl
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/apps'
making install in test...
make[1]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/test'
make[1]: Nothing to be done for `install'.
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/test'
making install in tools...
make[1]: Entering directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/tools'
make[1]: Leaving directory `/home/install_ispconfig/compile_aps/openssl-0.9.8i/tools'
installing libcrypto.a
installing libssl.a
cp libcrypto.pc /root/ispconfig/openssl/lib/pkgconfig
chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libcrypto.pc
cp libssl.pc /root/ispconfig/openssl/lib/pkgconfig
chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libssl.pc
cp openssl.pc /root/ispconfig/openssl/lib/pkgconfig
chmod 644 /root/ispconfig/openssl/lib/pkgconfig/openssl.pc
+ Warning: Your 'echo' command is slightly broken.
+ It interprets escape sequences per default. We already
+ tried 'echo -E' but had no real success. If errors occur
+ please set the SEO variable in 'configure' manually to
+ the required 'echo' options, i.e. those which force your
+ 'echo' to not interpret escape sequences per default.
Configuring mod_ssl/2.8.31 for Apache/1.3.41
+ Apache location: ../apache_1.3.41 (Version 1.3.41)
+ OpenSSL location: /root/ispconfig/openssl
+ Auxiliary patch tool: ./etc/patch/patch (local)
+ Applying packages to Apache source tree:
o Extended API (EAPI)
o Distribution Documents
o SSL Module Source
o SSL Support
o SSL Configuration Additions
o SSL Module Documentation
o Addons
Done: source extension and patches successfully applied.

Configuring for Apache, Version 1.3.41
+ Warning: Your 'echo' command is slightly broken.
+ It interprets escape sequences per default. We already
+ tried 'echo -E' but had no real success. If errors occur
+ please set the SEO variable in 'configure' manually to
+ the required 'echo' options, i.e. those which force your
+ 'echo' to not interpret escape sequences per default.
+ using installation path layout: Apache (config.layout)
Creating Makefile
Creating Configuration.apaci in src
Syntax error --- The configuration file is used only to
define the list of included modules or to set Makefile in src
options or Configure rules, and I don't see that at all:
/root/ispconfig/openssl
yes
default
no
no
no
`$(SRCDIR)/apaci`
no
default
default
no
no
no
yes
no
default
no
default
default



















./configure:Error: APACI failed
ERROR: Could not configure Apache
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory
Please enter your MySQL server:localhost
OK
Please enter your MySQL user:root
Please enter your MySQL password:
OK
Please enter a name for the ISPConfig database (e.g. db_ispconfig):db_isp
Please enter the IP address of the ISPConfig web (e.g. 192.168.0.1):myip
OK
Please enter the host name (e.g. www):www
Please enter the domain (e.g. xyz.de):mydomain.com
OK
Please select the protocol (http or https (SSL encryption)) to use to access the ISPConfig system:
1) HTTPS
2) HTTP
Your Choice: 2

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
Restarting some services...
* Stopping Postfix Mail Transport Agent postfix [ OK ]
* Starting Postfix Mail Transport Agent postfix [ OK ]
./setup2: line 1163: /etc/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://mydomain.com:81

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /home/install_ispconfig/compile_aps/../..: No such file or directory
(root@H045)-(/home/install_ispconfig) $
Reply With Quote
  #4  
Old 12th February 2009, 22:52
Allen15 Allen15 is offline
Junior Member
 
Join Date: Jan 2009
Posts: 29
Thanks: 4
Thanked 0 Times in 0 Posts
Default

I am running 8.10 (now), but that has nothing to do with your errors. I have gotten those same errors before, and they were apparently the result of a typo during the setup on one of the steps or some package that didn't install (or install correctly).

It will be much faster (especially if this is a clean installation on a new system) to delete your ispconfig install folder, delete /root/ispconfig (-R), and format/reinstall from scratch.

I found that I not only got better results by doing a bare installation with only OpenSSH server, and then switching over to a remote PuTTY session thereafter, but I was also able to copy and paste all of the commands into a plain text file, edit anything that was supposed to be specific to my install, and then paste the commands into PuTTY much faster and more accurately than by typing and/or retyping them by hand. It will probably take you less time to scrape and reload than to chase your demons.

The ISPConfig installation will automatically delete most of itself if it errors out during install, and that is what the tail end of your errors is showing from your first posting.

HTH
Reply With Quote
  #5  
Old 12th February 2009, 23:07
steve51184 steve51184 is offline
Member
 
Join Date: Mar 2008
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
Default

but i can't format my server it's a new server and i've just got it and i have it half setup.. don't you have any idea what is causing it?
Reply With Quote
  #6  
Old 12th February 2009, 23:29
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,717
Thanks: 820
Thanked 5,322 Times in 4,175 Posts
Default

You missed step 9 of the installation instructions:

http://www.howtoforge.com/perfect-se...ntu8.04-lts-p3
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #7  
Old 13th February 2009, 01:38
Allen15 Allen15 is offline
Junior Member
 
Join Date: Jan 2009
Posts: 29
Thanks: 4
Thanked 0 Times in 0 Posts
Default

I hope you don't already have sites and/or users setup on it, as that was specifically warned against in the ISPConfig documentation, but no matter what, you will have to at the very least, delete your installation folder, delete the /root/ispconfig/* tree, and delete/drop any mysql database created by this installation.

If the installation had completed normally, there would be an uninstall script in /root/ispconfig, but you may not have gotten that far before it bombed out. If not, you have to manually do the 3 things mentioned first. After that, you can go back through your instruction set and copy/paste all of the commands to install and configure software for the server setup, just to be sure, since the worst that can happen is that apt-get install [whatever] will give you and error message that package xyz is already installed, and at best, will install something that you didn't successfully get installed the previous time.

Hopefully you only have a missing package issue, not a configuration problem, since not knowing what you have or where it is kept will keep you from being able to go back to original (clean install) configuration and at my level of inexperience, the only way I know how to reset the configuration files is to wipe and reload.

If you do get your packages all installed, try to ftp in and upload the ISPConfig install file, which will verify that your ftp server is working too. Copy or move it to /var/tmp, re-extract, and re-install. Keep an eye on the PuTTY window for errors (You *are* doing this from a remote shell, right?), and keep in mind that if it installs correctly, this process will end up taking MUCH longer than before when it erred out and stopped prematurely. YMMV depending on the speed of your server, but I found that it took almost a hour to completely run through the installation script when it was working correctly vs. something like less than 6 minutes when it gave me your original errors.

Remember that copy and paste are your best friends, and you might even consider pasting onto a very boring plain text editor that you can change fonts on, just in case you have some visual confusion over what some character is in your web browser font vs, what the actual ascii character really is. If you have any doubts over whether something is a one or the lower-case letter "L", change the font and look at it again for a 2nd opinion, if it may make a difference.

Good luck
Reply With Quote
  #8  
Old 13th February 2009, 01:42
Allen15 Allen15 is offline
Junior Member
 
Join Date: Jan 2009
Posts: 29
Thanks: 4
Thanked 0 Times in 0 Posts
Default

Quote:
You missed step 9 of the installation instructions:

http://www.howtoforge.com/perfect-se...ntu8.04-lts-p3
__________________
That step also doesn't give any visual feedback on whether or not it was successfully completed, so it is really one to copy and paste, and it wouldn't hurt to copy and paste it twice.

How can one check to see if that step was successful?? If there is some way to check, it would be nice to update the How-To description of that step to include verification of completion? Just a thought...

Last edited by Allen15; 13th February 2009 at 01:44. Reason: Clarity
Reply With Quote
  #9  
Old 13th February 2009, 08:26
steve51184 steve51184 is offline
Member
 
Join Date: Mar 2008
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by till View Post
You missed step 9 of the installation instructions:

http://www.howtoforge.com/perfect-se...ntu8.04-lts-p3
that seems to get me a little further but i still get errors:

Quote:
checking for size_t... yes
checking for uid_t in sys/types.h... yes
checking for struct sockaddr_storage... yes
checking for field sa_len in struct sockaddr... no
checking for IPv6 support... yes
checking for vprintf... yes
checking for alphasort... yes
checking for asctime_r... yes
checking for chroot... yes
checking for ctime_r... yes
checking for cuserid... yes
checking for crypt... no
checking for flock... yes
checking for ftok... yes
checking for funopen... no
checking for gai_strerror... yes
checking for gcvt... yes
checking for getloadavg... yes
checking for getlogin... yes
checking for getprotobyname... yes
checking for getprotobynumber... yes
checking for getservbyname... yes
checking for getservbyport... yes
checking for getrusage... yes
checking for gettimeofday... yes
checking for gmtime_r... yes
checking for getpwnam_r... yes
checking for getgrnam_r... yes
checking for getpwuid_r... yes
checking for grantpt... yes
checking for inet_ntoa... yes
checking for inet_ntop... yes
checking for inet_pton... yes
checking for isascii... yes
checking for link... yes
checking for localtime_r... yes
checking for lockf... yes
checking for lchown... yes
checking for lrand48... yes
checking for memcpy... yes
checking for memmove... yes
checking for mkstemp... yes
checking for mmap... yes
checking for nl_langinfo... yes
checking for perror... yes
checking for poll... yes
checking for ptsname... yes
checking for putenv... yes
checking for realpath... yes
checking for random... yes
checking for rand_r... yes
checking for regcomp... yes
checking for res_search... (cached) yes
checking for scandir... yes
checking for setitimer... yes
checking for setlocale... yes
checking for localeconv... yes
checking for setenv... yes
checking for setpgid... yes
checking for setsockopt... yes
checking for setvbuf... yes
checking for shutdown... yes
checking for sin... yes
checking for snprintf... yes
checking for srand48... yes
checking for srandom... yes
checking for statfs... yes
checking for statvfs... yes
checking for std_syslog... no
checking for strcasecmp... yes
checking for strcoll... yes
checking for strdup... yes
checking for strerror... yes
checking for strftime... yes
checking for strptime... yes
checking for strstr... yes
checking for strtok_r... yes
checking for symlink... yes
checking for tempnam... yes
checking for tzset... yes
checking for unlockpt... yes
checking for unsetenv... yes
checking for usleep... yes
checking for nanosleep... yes
checking for utime... yes
checking for vsnprintf... yes
checking for getaddrinfo... yes
checking for strlcat... no
checking for strlcpy... no
checking for getopt... yes
checking whether utime accepts a null argument... yes
checking for working alloca.h... (cached) yes
checking for alloca... yes
checking for declared timezone... yes
checking for type of reentrant time-related functions... POSIX
checking for readdir_r... yes
checking for type of readdir_r... POSIX
checking for in_addr_t... yes
checking for crypt_r... no

General settings
checking whether to include gcov symbols... no
checking whether to include debugging symbols... no
checking layout of installed files... PHP
checking path to configuration file... /root/ispconfig/php
checking where to scan for configuration files...
checking whether to enable safe mode by default... no
checking for safe mode exec dir... /usr/local/php/bin
checking whether to enable PHP's own SIGCHLD handler... no
checking whether to enable magic quotes by default... no
checking whether to explicitly link against libgcc... no
checking whether to enable short tags by default... yes
checking whether to enable dmalloc... no
checking whether to enable IPv6 support... yes
checking how big to make fd sets... using system default

Configuring extensions
checking whether to enable LIBXML support... no
checking libxml2 install dir... no
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for DSA_get_default_method in -lssl... no
checking for pkg-config... no
configure: error: Cannot find OpenSSL's <evp.h>
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories : No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory
Please enter your MySQL server:locslhost
The MySQL server you specified cannot be reached!
Please enter your MySQL server:root
The MySQL server you specified cannot be reached!
Please enter your MySQL server:localhost
OK
Please enter your MySQL user:root
Please enter your MySQL password:
OK
Please enter a name for the ISPConfig database (e.g. db_ispconfig):db_isp
Please enter the IP address of the ISPConfig web (e.g. 192.168.0.1):serverip. 161
OK
Please enter the host name (e.g. www):
Please enter the domain (e.g. xyz.de):serverip
OK
Please select the protocol (http or https (SSL encryption)) to use to access the ISPConfig system:
1) HTTPS
2) HTTP
Your Choice: 2

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapp er': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or d irectory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or d irectory
Restarting some services...
shell-init: error retrieving current directory: getcwd: cannot access parent dir ectories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent dir ectories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent dir ectories: No such file or directory
* Stopping Postfix Mail Transport Agent postfix [ OK ]
shell-init: error retrieving current directory: getcwd: cannot access parent dir ectories: No such file or directory
* Starting Postfix Mail Transport Agent postfix chdir: error retrieving current directory: getcwd: cannot access parent director ies: No such file or directory
[ OK ]
./setup2: line 1163: /etc/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install q uota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://serverip:81

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /home/install_ispconfig/compile_aps/../..: No such file or directory
(root@H045)-(/home/install_ispconfig) $
Reply With Quote
  #10  
Old 13th February 2009, 08:58
Allen15 Allen15 is offline
Junior Member
 
Join Date: Jan 2009
Posts: 29
Thanks: 4
Thanked 0 Times in 0 Posts
 
Default

I would have to guess that you either are missing some installation package or had an error during the perfect-server-setup installation that you missed while installing something, OR you have the wrong version of something installed.

I know this all sounds like a royal PITA, but did you try re-installing all of the packages listed in the perfect server setup guide, and did you do a copy and paste of ALL of those lines directly from the web page to a remote shell?

When I went back through determined to make this work or catch the error in the installation, I did each step, and then tried to look for ways to verify that each step actually completed properly. The first step of installing OpenSSH server is pretty easy to verify, because you can't get a remote PuTTY session to work if that step wasn't properly done at the console, but each step thereafter gives an opportunity to test to see if it worked or will be what is tripping you up.

I don't know if there is an official way to verify step 9, but what I did was to type gibberish at the prompt, and upon pressing enter, I got a response from the command shell that what junk I'd typed was an unknown command, and looked something like this: "bash: tgarihgo: unreconized command or filename."

I don't know if that is worth anything, but nearly every other step produced results that were readily verified. Anything you install with apt-get install will either return a result that it is already installed, or go through the process of installing, sometimes prompting you to approve the additional hard drive space/usage.

There was also a thread I found somewhere in this forum where the discussion suggested that some of the packages had changed contents over the life of the tutorial, and didn't (no longer?) automatically install all of the needed libraries and/or modules, but I didn't mark it, and don't remember it. You could have some modules or libraries that may have been removed because they were thought to be orphaned but turned out to be needed later on. Try re-installing EVERYTHING that you installed with apt-get and watch the outputs to see if anything actually installs, and then do the triple dump of dropping/deleting the mysql database, deleting the /root/ispconfig directory recursively, and also the install directory too. Re-extract ISPConfig from the tar.gz file, and try it again?

Good luck.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISPconfig install error - "PHP Binary coming with ISPConfig does not work ..." mleblanc Server Operation 5 24th June 2008 17:40
New ISPConfig Install nubtool Installation/Configuration 15 18th May 2008 16:46
unable to install ISPConfig aberrio Installation/Configuration 4 2nd September 2007 14:57
ISPConfig install continues to fail jervolpe Installation/Configuration 3 6th July 2007 12:17
ISPConfig install error clabrown Installation/Configuration 6 4th January 2007 16:46


All times are GMT +2. The time now is 19:57.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.