Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Server Operation

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 2nd February 2006, 07:14
gimhan90 gimhan90 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 139
Thanks: 2
Thanked 0 Times in 0 Posts
Default VSFTPD is not working after install the ISPConfig

Hi folks,

After successfully installing the ISPConfig ( Big THANKS goes to falko and till , now i can't use my vsftpd server . It seems stop .

It seems ftp port is being used by other some othe process.

su93254144:/etc/xinetd.d # /etc/init.d/xinetd start
Starting INET services. (xinetd) failed
su93254144:/etc/xinetd.d # /etc/init.d/xinetd status
Checking for service xinetd: unused
su93254144:/etc/xinetd.d # netstat -a | grep ftp
tcp 0 0 *:exasoftport1 *:* LISTEN


further ,

netstat -tap

su93254144:~/ispconfig/httpd # ntetsytat -tap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 *:smux *:* LISTEN 14602/snmpd
tcp 0 0 *:mysql *:* LISTEN 3747/mysqld
tcp 0 0 su93254144.aspadmiop3 *:* LISTEN 5093/couriertcpd
tcp 0 0 su93254144.aspadmi:imap *:* LISTEN 31789/couriertcpd
tcp 0 0 *:ndmp *:* LISTEN 30075/perl
tcp 0 0 *:hosts2-ns *:* LISTEN 27978/ispconfig_htt
tcp 0 0 su93254144.aspad:domain *:* LISTEN 28155/named
tcp 0 0 localhost:domain *:* LISTEN 28155/named
tcp 0 0 localhost:953 *:* LISTEN 28155/named
tcp 0 0 localhost:40934 *:* LISTEN 9929/appserv
tcp 0 0 *:scp *:* LISTEN 9929/appserv
tcp 0 0 *:40942 *:* LISTEN 9958/java
tcp 0 0 *:8686 *:* LISTEN 9929/appserv
tcp 0 0 *:40943 *:* LISTEN 9958/java
tcp 0 0 *:www-http *:* LISTEN 28049/httpd2-prefor
tcp 0 0 *:exasoftport1 *:* LISTEN 9929/appserv
tcp 0 0 *:appserv-http *:* LISTEN 9929/appserv
tcp 0 0 *:8081 *:* LISTEN 9929/appserv
tcp 0 0 *:40948 *:* LISTEN 9929/appserv
tcp 0 0 *:lrs-paging *:* LISTEN 9929/appserv
tcp 0 0 *:domain *:* LISTEN 28155/named
tcp 0 0 *:8181 *:* LISTEN 9929/appserv
tcp 0 0 *:ssh *:* LISTEN 5442/sshd
tcp 0 0 localhost:953 *:* LISTEN 28155/named
tcp 0 0 *:https *:* LISTEN 28049/httpd2-prefor
tcp 0 0 *:imqbrokerd *:* LISTEN 9958/java

Thx,
gim

Last edited by gimhan90; 2nd February 2006 at 08:49.
Reply With Quote
Sponsored Links
  #2  
Old 2nd February 2006, 09:18
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Can you post the xinetd-vsftpd configuration file? Should be in /etc/xinetd.d/.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 2nd February 2006, 10:28
gimhan90 gimhan90 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 139
Thanks: 2
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
Can you post the xinetd-vsftpd configuration file? Should be in /etc/xinetd.d/.
It seems missing .

my (/etc/xinetd.d ) looks as follows ,
su93254144:/etc/xinetd.d # ls
. amanda chargen daytime-udp fam servers time
.. amandaidx chargen-udp echo netstat services time-udp
.vsftpd.swp amidxtape daytime echo-udp rsync systat


su93254144:/etc # whereis vsftpd
vsftpd: /usr/sbin/vsftpd /etc/vsftpd.conf /usr/share/man/man8/vsftpd.8.gz

su93254144:/etc # rpm -q vsftpd
vsftpd-2.0.2-3

here is my /etc/vsftpd.conf

su93254144:/etc # cat vsftpd.conf
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# If you do not change anything here you will have a minimum setup for an
# anonymus FTP server.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.

# General Settings
#
# Uncomment this to enable any form of FTP write command.
#
write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
#
dirmessage_enable=YES
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#
#nopriv_user=ftpsecure
#
# You may fully customise the login banner string:
#
#ftpd_banner="Welcome to FOOBAR FTP service."
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#
ls_recurse_enable=YES
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#
#deny_email_enable=YES
#
# (default follows)
#
#banned_email_file=/etc/vsftpd.banned_emails
#
# If enabled, all user and group information in
# directory listings will be displayed as "ftp".
#
#hide_ids=YES

# Local FTP user Settings
#
# Uncomment this to allow local users to log in.
#
local_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
#local_umask=022
#
# Uncomment to put local users in a chroot() jail in their home directory
# after login.
#
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#
#chroot_list_enable=YES
#
# (default follows)
#
#chroot_list_file=/etc/vsftpd.chroot_list
#
# The maximum data transfer rate permitted, in bytes per second, for
# local authenticated users. The default is 0 (unlimited).
#
#local_max_rate=7200


# Anonymus FTP user Settings
#
# Allow anonymous FTP?
#
anonymous_enable=YES
#
# Anonymous users will only be allowed to download files which are
# world readable.
#
anon_world_readable_only=YES
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#
#anon_upload_enable=YES
#
# Default umask for anonymus users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
#anon_umask=022
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#
#anon_mkdir_write_enable=YES
#
# Uncomment this to enable anonymus FTP users to perform other write operations
# like deletion and renaming.
#
#anon_other_write_enable=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#
#chown_uploads=YES
#chown_username=whoever
#
# The maximum data transfer rate permitted, in bytes per second, for anonymous
# authenticated users. The default is 0 (unlimited).
#
#anon_max_rate=7200


# Log Settings
#
# Log to the syslog daemon instead of using an logfile.
#
syslog_enable=YES
#
# Uncomment this to log all FTP requests and responses.
#
#log_ftp_protocol=YES
#
# Activate logging of uploads/downloads.
#
#xferlog_enable=YES
#
# You may override where the log file goes if you like. The default is shown
# below.
#
#vsftpd_log_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note: This disables the normal logging unless you enable dual_log_enable below.
#
#xferlog_std_format=YES
#
# You may override where the log file goes if you like. The default is shown
# below.
#
#xferlog_file=/var/log/xferlog
#
# Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log.
#
#dual_log_enable=YES
#
# Uncomment this to enable session status information in the system process listing.
#
#setproctitle_enable=YES

# Transfer Settings
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
#
connect_from_port_20=YES
#
# You may change the default value for timing out an idle session.
#
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#
#data_connection_timeout=120
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# Set to NO if you want to disallow the PASV method of obtaining a data
# connection.
#
#pasv_enable=NO

# PAM setting. Do NOT change this unless you know what you do!
#
pam_service_name=vsftpd

# Set listen=YES if you want vsftpd to run standalone
#
# listen=YES
Reply With Quote
  #4  
Old 2nd February 2006, 12:26
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

You have a .vsftpd.swp in /etc/xinetd.d which makes me believe that someone tried to edit the file with vi and didn't close it correctly. Maybe that's the reason why the vsftpd file is gone...
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 2nd February 2006, 12:31
gimhan90 gimhan90 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 139
Thanks: 2
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
You have a .vsftpd.swp in /etc/xinetd.d which makes me believe that someone tried to edit the file with vi and didn't close it correctly. Maybe that's the reason why the vsftpd file is gone...
FTP doesn't work after the installation of the ISPConfig . I can't imagine how it missess ,
what can i do now? Do i need to reset up again it or ...
Reply With Quote
  #6  
Old 2nd February 2006, 19:01
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Quote:
Originally Posted by gimhan90
FTP doesn't work after the installation of the ISPConfig .
It doesn't have anything to do with ISPConfig. The vsftpd file in /etc/xinetd.d is simply missing. You can try to re-create it by having a look how the other files in that directory are written.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 3rd February 2006, 05:11
gimhan90 gimhan90 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 139
Thanks: 2
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
It doesn't have anything to do with ISPConfig. The vsftpd file in /etc/xinetd.d is simply missing. You can try to re-create it by having a look how the other files in that directory are written.
I reinstall it (vsftpd), but
su93254144:/etc/xinetd.d # cat vsftpd
# default: off
# description:
# The vsftpd FTP server serves FTP connections. It uses
# normal, unencrypted usernames and passwords for authentication.
# vsftpd is designed to be secure.
service ftp
{
socket_type = stream
protocol = tcp
wait = no
user = root
server = /usr/sbin/vsftpd
# server_args =
# log_on_success += DURATION USERID
# log_on_failure += USERID
# nice = 10
disable = no
}

u93254144:/etc # ls -lacd ../etc/xinetd.d/vsftpd restart
/etc/xinetd.d/vsftpd: line 6: service: command not found
/etc/xinetd.d/vsftpd: line 8: socket_type: command not found
/etc/xinetd.d/vsftpd: line 9: protocol: command not found
/etc/xinetd.d/vsftpd: line 10: wait: `=': not a pid or valid job spec
/etc/xinetd.d/vsftpd: line 10: wait: `no': not a pid or valid job spec
/etc/xinetd.d/vsftpd: line 11: user: command not found
/etc/xinetd.d/vsftpd: line 12: server: command not found
/etc/xinetd.d/vsftpd: line 17: disable: command not found
su93254144:/etc # netstat -a | grep ftp

Last edited by gimhan90; 3rd February 2006 at 05:13.
Reply With Quote
  #8  
Old 3rd February 2006, 08:51
till till is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,412
Thanks: 834
Thanked 5,496 Times in 4,326 Posts
Default

To restart a service that runs with xinetd, you have to execute this command:

Code:
/etc/init.d/xinetd restart
The files in /etc/xinetd.d/ are only config files, not start scripts.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #9  
Old 3rd February 2006, 09:25
gimhan90 gimhan90 is offline
Senior Member
 
Join Date: Jan 2006
Posts: 139
Thanks: 2
Thanked 0 Times in 0 Posts
 
Default

Quote:
Originally Posted by till
To restart a service that runs with xinetd, you have to execute this command:

Code:
/etc/init.d/xinetd restart
The files in /etc/xinetd.d/ are only config files, not start scripts.
BIG THANKS ,
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I get PHP to work after ISPConfig Install alvadore Installation/Configuration 22 30th March 2008 15:57
ISPConfig install error g8rbait Server Operation 2 10th November 2005 21:09
install successful but no ispconfig site Nu2Linux Installation/Configuration 3 3rd November 2005 23:30
Working with ISPConfig with IP MyLinux General 5 5th September 2005 10:24
can i install horde/imp with ispconfig Venkatesh.S Installation/Configuration 1 26th July 2005 19:54


All times are GMT +2. The time now is 20:44.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.