WARNING: could not unpack ISPConfig system

[hbellmer]

this was a good idea (why i didn't get it), ill try this. i will repost:

After 40minutes of Compiling (much more then before) it crashed...

.5/ext/date/lib -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/oniguruma -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/libmbfl -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/libmbfl/mbfl -I/usr/include/mysql -I/tmp/install_ispconfig/compile_aps/php-5.2.5/TSRM -I/tmp/install_ispconfig/compile_aps/php-5.2.5/Zend    -I/usr/include -g -O2  -prefer-non-pic -c /tmp/install_ispconfig/compile_aps/php-5.2.5/Zend/zend_execute.c -o Zend/zend_execute.lo 
virtual memory exhausted: Cannot allocate memory
make: *** [Zend/zend_execute.lo] Error 1
ERROR: Could not make PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: Das mitgelieferte PHP-Binary funktioniert auf Ihrem System nicht! Die Installation bricht hier ab!

Is it possible to change Compileoptions? Or any suggestions?

[falko]

You can try to modify the compilation in install_ispconfig/compile_aps/compile.

[hbellmer]

hmm okay, i'll try. any ideas what i could change?

atm i tried the "64Bit" hack, i found via google -> this means that i compile it in 64 bit mode

[hbellmer]

Originally Posted by hbellmer

hmm okay, i'll try. any ideas what i could change?

atm i tried the "64Bit" hack, i found via google -> this means that i compile it in 64 bit mode

It dont work, argh....

I had actually no Ideas, anymore. And why php needs so much RAM?

[till]

How much free memory do you have and how large is your swap space?

[hbellmer]

Originally Posted by till

How much free memory do you have and how large is your swap space?

root@v1919:~# cat /proc/meminfo 
MemTotal:      8144612 kB
MemFree:        127716 kB
Buffers:        118100 kB
Cached:        2432624 kB
SwapCached:        136 kB
Active:        6236700 kB
Inactive:       519348 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      8144612 kB
LowFree:        127716 kB
SwapTotal:    10241428 kB
SwapFree:     10225096 kB
Dirty:            5868 kB
Writeback:           0 kB
Mapped:        5072160 kB
Slab:           941936 kB
CommitLimit:  14313732 kB
Committed_AS: 13651808 kB
PageTables:     134988 kB
VmallocTotal: 536870908 kB
VmallocUsed:    333124 kB
VmallocChunk: 536536220 kB

root@v1919:~# cat /proc/mounts 
vzfs / vzfs rw 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid 0 0
proc /proc proc rw,nodiratime,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0

root@v1919:~# free
             total       used       free     shared    buffers     cached
Mem:       8144612    8008560     136052          0     121148    2465456
-/+ buffers/cache:    5421956    2722656
Swap:     10241428      16332   10225096

So there is no swapspace. And i'am not sure about the memory, how can i check this? I tried the setup last night when free told me about 400MB RAM free on the hole system, So i think the 160 granteed and the 160 boost Ram should be used.

And i found something, that makes me confusesd:

root@v1919:~# uname -a
Linux v1919.ncsrv.de 2.6.9-023stab046.2-smp #1 SMP Mon Dec 10 15:04:55 MSK 2007 i686 GNU/Linux

root@v1919:~# cat /proc/version 
Linux version 2.6.9-023stab046.2-smp (root@rhel4-64) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Mon Dec 10 15:04:55 MSK 2007

So it seems that the (viruozzo) host is 64Bit and my Vserver is 32 Bit -> OR am i wrong?

I'll hope that there will be a solution.

Greetings and thanks from Bremen
Hannes

[hbellmer]

I GOT IT.

I unpacked ISPConfig and then i unpacked php in the compile_aps folder. Uncommented the "tar xvzf php.." in the compile-file and removte the "-O2" tags in the Makefile from php.

YEAH

Thank Till and Falko

now i had to learn how to use ispconfig.

[benitomdq]

Originally Posted by hbellmer

I GOT IT.

I unpacked ISPConfig and then i unpacked php in the compile_aps folder. Uncommented the "tar xvzf php.." in the compile-file and removte the "-O2" tags in the Makefile from php.

YEAH

Thank Till and Falko

now i had to learn how to use ispconfig.

Hello i think i have this same problem. Can you be more specific on your last steps? Full path to the files you have edited. Thanks!