Disk Usage Help?

[Eleven Cool]

I followed the guide on installing ISPConfig 3 on a fresh CentOS 6 and its all up and running well now. When I goto "Monitor" => "Disk Usage" within ISPConfig I see this:

Filesystem 	Type 	Size 	Used 	Available 	Use% 	Mounted on
/dev/mapper/VolGroup-lv_root						
	ext4	50G	3.3G	44G	7%	/
tmpfs	tmpfs	1.8G	0	1.8G	0%	/dev/shm
/dev/sda1	ext4	485M	98M	362M	22%	/boot
/dev/mapper/VolGroup-lv_home						
	ext4	864G	269M	820G	1%	/home

Whenever I add a new site and all the files, it is going onto the / partition and not the /home partition. My /home partition has 820G and the / partition only has 44G. I'm not really sure what to do, apart from the guide I've never had to deal with mounting or partitioning myself, as I'm new at this.

Can someone please let me know what the optimal solution here is to either swap the capacities of the partitions or to change which partition the website files are stored on and how to do it?

Thank you.

[Athar]

In theory, website files are stored in /var/www
So, it's normal that the file system in use here is / and not /home

I will install a multi server environment soon, so I will verify that.

[till]

Website files are stored in /var/www and email files in /var/vmail, so a large /var partition is recommended.

[Eleven Cool]

I'm not sure how these partitions were setup in the first place, I just followed the guide. How do I setup a /var partition and reallocate all those gigabytes to the new /var partition from /home partition? Additionally, should I even create a /var partition or just increase the limit of the / partition?

[cfoe]

what kind of server are you using?
a machine at home/office? a dedicated/virtual server from a hosting company?

I also use CentOS 5 and 6 and with the standard partitioning selected on setup such a configuration should not occur.

[Eleven Cool]

Originally Posted by cfoe

what kind of server are you using?
a machine at home/office? a dedicated/virtual server from a hosting company?

I also use CentOS 5 and 6 and with the standard partitioning selected on setup such a configuration should not occur.

Its a home server. I used the standard partitioning as well on setup, CentOS 6.3. Is there a way to fix this or do I need to wipe and re-install everything?