Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 4th September 2011, 23:56
jz_ jz_ is offline
Junior Member
 
Join Date: Jun 2011
Location: Madrid
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to jz_
Exclamation Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail-Problema

Hello good I have a problem, I have followed several times to the next how-Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail.
My OS is centos 6,
the problem is that I run the virtual users that are files and the maillog.

Maillog
Code:
Sep  4 22:42:00 linux authdaemond: modules="authmysql", daemons=5
Sep  4 22:42:00 linux authdaemond: Installing libauthmysql
Sep  4 22:42:00 linux authdaemond: Installation complete: authmysql
Sep  4 22:42:04 linux postfix/postfix-script[1895]: starting the Postfix mail system
Sep  4 22:42:04 linux postfix/master[1896]: daemon started -- version 2.6.6, configuration /etc/postfix
Sep  4 22:43:13 linux imapd: Connection, ip=[::ffff:127.0.0.1]
Sep  4 22:43:13 linux imapd: LOGIN FAILED, user=javier@reforo.com, ip=[::ffff:127.0.0.1]
Sep  4 22:43:18 linux imapd: LOGOUT, ip=[::ffff:127.0.0.1], rcvd=57, sent=332
Sep  4 22:47:16 linux imapd: Connection, ip=[::ffff:127.0.0.1]
Sep  4 22:47:16 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:127.0.0.1]
Sep  4 22:47:21 linux imapd: LOGOUT, ip=[::ffff:127.0.0.1], rcvd=55, sent=332
Sep  4 22:47:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 22:47:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 22:47:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 22:47:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 22:47:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2211]: connect from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2220]: connect from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2221]: connect from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2222]: connect from unknown[10.0.0.1]
Sep  4 22:47:56 linux imapd-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 22:47:56 linux postfix/smtpd[2220]: disconnect from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2222]: disconnect from unknown[10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 22:47:56 linux postfix/smtpd[2211]: improper command pipelining after EHLO from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2211]: disconnect from unknown[10.0.0.1]
Sep  4 22:47:56 linux imapd-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 22:47:56 linux postfix/smtpd[2221]: improper command pipelining after EHLO from unknown[10.0.0.1]
Sep  4 22:47:56 linux postfix/smtpd[2221]: disconnect from unknown[10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 22:47:56 linux imapd-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux imapd-ssl: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=468
Sep  4 22:47:56 linux imapd-ssl: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=468
Sep  4 22:47:56 linux pop3d-ssl: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 22:47:56 linux pop3d-ssl: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 22:48:02 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:48:05 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:48:05 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 22:48:10 linux imapd: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 22:48:15 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 22:48:15 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 22:48:15 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 22:48:20 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 22:48:25 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 22:51:16 linux postfix/anvil[2223]: statistics: max connection rate 4/60s for (smtp:10.0.0.1) at Sep  4 22:47:56
Sep  4 22:51:16 linux postfix/anvil[2223]: statistics: max connection count 4 for (smtp:10.0.0.1) at Sep  4 22:47:56
Sep  4 22:51:16 linux postfix/anvil[2223]: statistics: max cache size 1 at Sep  4 22:47:56
Sep  4 22:52:21 linux postfix/smtpd[2292]: connect from unknown[10.0.0.1]
Sep  4 22:53:33 linux postfix/smtpd[2292]: disconnect from unknown[10.0.0.1]
Sep  4 22:56:53 linux postfix/anvil[2294]: statistics: max connection rate 1/60s for (smtp:10.0.0.1) at Sep  4 22:52:21
Sep  4 22:56:53 linux postfix/anvil[2294]: statistics: max connection count 1 for (smtp:10.0.0.1) at Sep  4 22:52:21
Sep  4 22:56:53 linux postfix/anvil[2294]: statistics: max cache size 1 at Sep  4 22:52:21
Sep  4 23:00:07 linux postfix/postfix-script[2406]: stopping the Postfix mail system
Sep  4 23:00:07 linux postfix/master[1896]: terminating on signal 15
Sep  4 23:00:07 linux postfix/postfix-script[2487]: starting the Postfix mail system
Sep  4 23:00:07 linux postfix/master[2488]: daemon started -- version 2.6.6, configuration /etc/postfix
Sep  4 23:01:03 linux imapd: Connection, ip=[::ffff:127.0.0.1]
Sep  4 23:01:03 linux imapd: LOGIN FAILED, user=user1@reforo.com, ip=[::ffff:127.0.0.1]
Sep  4 23:01:08 linux imapd: LOGOUT, ip=[::ffff:127.0.0.1], rcvd=56, sent=332
Sep  4 23:01:35 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:01:35 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:01:38 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:01:38 linux pop3d: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 23:01:43 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:01:43 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:01:43 linux pop3d: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:01:48 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:01:52 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:01:52 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:01:57 linux imapd: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 23:02:02 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:02:02 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:02:02 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:02:07 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:02:12 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:10:38 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:10:38 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:10:43 linux imapd: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 23:10:48 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:10:48 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:10:48 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:10:53 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:10:58 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:16:59 linux imapd-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 23:16:59 linux imapd-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:17:00 linux imapd-ssl: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=468
Sep  4 23:17:09 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:17:09 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 23:17:09 linux postfix/smtpd[2601]: connect from unknown[10.0.0.1]
Sep  4 23:17:09 linux postfix/smtpd[2604]: connect from unknown[10.0.0.1]
Sep  4 23:17:09 linux postfix/smtpd[2601]: disconnect from unknown[10.0.0.1]
Sep  4 23:17:09 linux postfix/smtpd[2604]: disconnect from unknown[10.0.0.1]
Sep  4 23:17:11 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:17:11 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:17:16 linux imapd: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 23:17:21 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:17:21 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:17:21 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:17:26 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:17:31 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:20:29 linux postfix/anvil[2605]: statistics: max connection rate 2/60s for (smtp:10.0.0.1) at Sep  4 23:17:09
Sep  4 23:20:29 linux postfix/anvil[2605]: statistics: max connection count 2 for (smtp:10.0.0.1) at Sep  4 23:17:09
Sep  4 23:20:29 linux postfix/anvil[2605]: statistics: max cache size 1 at Sep  4 23:17:09
Sep  4 23:23:04 linux postfix/postfix-script[2652]: stopping the Postfix mail system
Sep  4 23:23:04 linux postfix/master[2488]: terminating on signal 15
Sep  4 23:23:04 linux postfix/postfix-script[2724]: starting the Postfix mail system
Sep  4 23:23:04 linux postfix/master[2725]: daemon started -- version 2.6.6, configuration /etc/postfix
Sep  4 23:23:12 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:12 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:23:17 linux imapd: LOGIN FAILED, user=mail, ip=[::ffff:10.0.0.1]
Sep  4 23:23:22 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:22 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:23:22 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:23:27 linux imapd: LOGIN FAILED, user=mail@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:23:32 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:23:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 23:23:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 23:23:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 23:23:56 linux pop3d: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=464
Sep  4 23:23:56 linux postfix/smtpd[2751]: connect from unknown[10.0.0.1]
Sep  4 23:23:56 linux imapd-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 23:23:56 linux postfix/smtpd[2754]: connect from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2755]: connect from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2755]: disconnect from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2756]: connect from unknown[10.0.0.1]
Sep  4 23:23:56 linux imapd-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 23:23:56 linux postfix/smtpd[2756]: disconnect from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2751]: improper command pipelining after EHLO from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2751]: disconnect from unknown[10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 23:23:56 linux pop3d-ssl: couriertls: accept: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate
Sep  4 23:23:56 linux postfix/smtpd[2754]: improper command pipelining after EHLO from unknown[10.0.0.1]
Sep  4 23:23:56 linux postfix/smtpd[2754]: disconnect from unknown[10.0.0.1]
Sep  4 23:23:56 linux imapd-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux imapd-ssl: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=468
Sep  4 23:23:56 linux imapd-ssl: LOGOUT, ip=[::ffff:10.0.0.1], rcvd=24, sent=468
Sep  4 23:23:56 linux pop3d-ssl: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: LOGOUT, ip=[::ffff:10.0.0.1]
Sep  4 23:23:56 linux pop3d-ssl: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:24:00 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:24:00 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:24:05 linux imapd: LOGIN FAILED, user=javier, ip=[::ffff:10.0.0.1]
Sep  4 23:24:10 linux imapd: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:24:10 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:24:10 linux imapd: LOGIN FAILED, method=PLAIN, ip=[::ffff:10.0.0.1]
Sep  4 23:24:15 linux imapd: LOGIN FAILED, user=javier@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:24:20 linux imapd: Disconnected, ip=[::ffff:10.0.0.1], time=10, starttls=1
Sep  4 23:25:10 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:25:10 linux pop3d: LOGIN FAILED, user=javier, ip=[::ffff:10.0.0.1]
Sep  4 23:25:15 linux pop3d: Connection, ip=[::ffff:10.0.0.1]
Sep  4 23:25:15 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:25:15 linux pop3d: LOGIN FAILED, user=javier@reforo.com, ip=[::ffff:10.0.0.1]
Sep  4 23:25:20 linux pop3d: Disconnected, ip=[::ffff:10.0.0.1]
Sep  4 23:27:16 linux postfix/anvil[2757]: statistics: max connection rate 4/60s for (smtp:10.0.0.1) at Sep  4 23:23:56
Sep  4 23:27:16 linux postfix/anvil[2757]: statistics: max connection count 3 for (smtp:10.0.0.1) at Sep  4 23:23:56
Sep  4 23:27:16 linux postfix/anvil[2757]: statistics: max cache size 1 at Sep  4 23:23:56

Main.cf
Code:
#soft_bounce = no

# LOCAL PATHNAME INFORMATION


queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin


#
daemon_directory = /usr/libexec/postfix


#
data_directory = /var/lib/postfix

# QUEUE AND PROCESS OWNERSHIP

# USER.
#
mail_owner = postfix


#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
# 

#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
#
#mydomain = domain.tld

# SENDING MAIL
# 

#
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL


#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
inet_interfaces = all

# Enable IPv4, and IPv6 if supported
inet_protocols = all


#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4


#
#mydestination = linux.reforo.com, localhost, localhost.localdomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#	mail.$mydomain, www.$mydomain, ftp.$mydomain


#

# 
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =


unknown_local_recipient_reject_code = 550


# 
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host


#

#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# 
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
# 
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# 
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# 
# Specify 0 to disable the feature. Valid delays are 0..10.
# 
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp

# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
# server using LMTP (Local Mail Transport Protocol), this is prefered
# over the older cyrus deliver program by setting the
# mailbox_transport as below:
#
# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#
# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
# these settings.
#
# local_destination_recipient_limit = 300
# local_destination_concurrency_limit = 5
#
# Of course you should adjust these settings as appropriate for the
# capacity of the hardware you are using. The recipient limit setting
# can be used to take advantage of the single instance message store
# capability of Cyrus. The concurrency limit can be used to control
# how many simultaneous LMTP sessions will be permitted to the Cyrus
# message store. 
#
# To use the old cyrus deliver program you have to set:
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
  
# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
# 
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
# 
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
	 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
	 ddd $daemon_directory/$process_name $process_id & sleep 5

# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#	>$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
#	PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
#	-dmS $process_name gdb $daemon_directory/$process_name
#	$process_id & sleep 1

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
# 
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
# 
sendmail_path = /usr/sbin/sendmail.postfix

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases.postfix

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
# 
mailq_path = /usr/bin/mailq.postfix

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = postdrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = no

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/postfix-2.6.6/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES
myhostname = linux.reforo.com
mynetworks = 127.0.0.0/8
virtual_alias_domains = 
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
virtual_mailbox_base = /home/vmail
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
smtpd_sasl_auth_enable = yes
broken_sasl_auth_clients = yes
smtpd_sasl_authenticated_header = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
virtual_create_maildirsize = yes
virtual_maildir_extended = yes
virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
virtual_mailbox_limit_override = yes
virtual_maildir_limit_message = "The user you are trying to reach is over quota."
virtual_overquota_bounce = yes
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
mydomain = reforo.com
#myorigin = $mydomain
mydestination = $myhostname, localhost, localhost.localdomain, reforo.com
smtpd_banner = $myhostname ESMTP $mail_name (Centos)
If I could help, sorry for my bad English.
Thank you very much Javier
Reply With Quote
Sponsored Links
  #2  
Old 5th September 2011, 10:20
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,739 Times in 2,574 Posts
Default

Which tutorial (URL) did you use?

BTW, I will soon release a tutorial for CentOS 6.0.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:

Last edited by falko; 6th September 2011 at 10:47.
Reply With Quote
  #3  
Old 5th September 2011, 15:22
jz_ jz_ is offline
Junior Member
 
Join Date: Jun 2011
Location: Madrid
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to jz_
Default

Thanks Falko.
followed two tutorials:

http://www.howtoforge.com/perfect-se...64-ispconfig-3

http://www.howtoforge.com/virtual-us...dora-15-x86_64

Very helpful I look forward to your tutorial.

carefully by Javier
Reply With Quote
  #4  
Old 6th September 2011, 10:48
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,739 Times in 2,574 Posts
Default

I can't see any big problems in your mail log. Do you have problems sending and receiving emails?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 6th September 2011, 21:26
jz_ jz_ is offline
Junior Member
 
Join Date: Jun 2011
Location: Madrid
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to jz_
Default

whether or not connect to the database mysql,
for users who put me .. says wrong password
Reply With Quote
  #6  
Old 7th September 2011, 11:52
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,739 Times in 2,574 Posts
Default

Can you post an excerpt from your mail log from the time when this happens?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
The Following User Says Thank You to falko For This Useful Post:
teencelom (17th August 2014)
Reply

Bookmarks

Tags
virtual users and domains

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail gu35t HOWTO-Related Questions 5 3rd February 2011 20:25
Update for Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail de Freitas HOWTO-Related Questions 6 7th July 2010 22:49
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 9.10) keyslapper HOWTO-Related Questions 4 20th April 2010 15:46
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 9.04) Master One HOWTO-Related Questions 4 1st July 2009 15:38
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 8.10) VTCop HOWTO-Related Questions 9 9th April 2009 16:17


All times are GMT +2. The time now is 17:20.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.