ISPConfig 3 problems with mail Help me !!!!!!!

[albertox26]

hi all I have a problem with the email of ispconfig 3 I can send emails but I can not get them.

I have a server that I am using router all port as much as 80 to 8080 and those for the OPERATING of ispconfig 3 are routed to the server.

the question is ...

that I can not receive?

HowtoForge follow the guide of ispconfig 3 with dovecot bind and step by step and is installed correctly ....

the operating system is debian 5.0 Lenny

I am using iptables

would greatly appreciate the help

Thanks!!

[till]

Are you able to send yourself a email locally from one account that is hosted on the server to another account which is hosted on the same server?

[albertox26]

if I can send mail between mail accounts of several domains hosted on the same server .....

if I send mail from GMAIL to mail accounts of registered domains on my server I have not received

sorry for my English I'm using a translator to write

[Ghostdare]

I think that you have a problem with DNS. Chech if you have a corect pointing to your server.

[till]

if I can send mail between mail accounts of several domains hosted on the same server .....

Thats good as it indicated that the problem is not the mailserver. As Ghostdare pointed out, you should check your dns records. Additionally, make sure that you forwarded port 25 from your router to your server and that your internet access provider does not block port 25.

[albertox26]

ok I'll check the dns anyway I send a copy of the iptables configuration file to see if I'm wrong in the configuration of ports


## FLUSH de reglas
iptables -F
iptables -X
iptables -t nat -F

## Establecemos politica por defecto
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -t nat -P PREROUTING ACCEPT
iptables -t nat -P POSTROUTING ACCEPT

## Nota: eth0 es el interfaz conectado a internet y eth1 a la LAN
# acceso localhost
/sbin/iptables -A INPUT -i lo -j ACCEPT

# Al firewall tenemos acceso desde las redes locales
iptables -A INPUT -s 192.168.0.0/24 -i eth0 -j ACCEPT
iptables -A INPUT -s 192.168.7.0/24 -i eth1 -j ACCEPT

# Ahora hacemos enmascaramiento de la red local
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -o eth0 -j MASQUERADE
iptables -t nat -A POSTROUTING -s 192.168.7.0/24 -o eth1 -j MASQUERADE

# Abrimos el puerto 25, hay que configurar bien el relay del servidor SMTP
iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 25 -j ACCEPT
# Abrimos el pop3
iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 110 -j ACCEPT

# Cerramos el rango de puerto bien conocido
# iptables -A INPUT -s 0/0 -p tcp -dport 1:1024 -j DROP
# iptables -A INPUT -s 0/0 -p udp -dport 1:1024 -j DROP

# Cerramos un puerto de gesti.n: webmin
# iptables -A INPUT -s 0/0 -p tcp -dport 10000 -j DROP

# Redireccionamiento de Puerto TCP

iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 20 -j DNAT --to-destination 192.168.7.2:20
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 21 -j DNAT --to-destination 192.168.7.2:21
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 23 -j DNAT --to-destination 192.168.7.2:23
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 25 -j DNAT --to-destination 192.168.7.2:25
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 53 -j DNAT --to-destination 192.168.7.2:53
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 80 -j DNAT --to-destination 192.168.7.2:80
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 110 -j DNAT --to-destination 192.168.7.2:110
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 143 -j DNAT --to-destination 192.168.7.2:143
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 465 -j DNAT --to-destination 192.168.7.2:465
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 443 -j DNAT --to-destination 192.168.7.2:443
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 8080 -j DNAT --to-destination 192.168.7.2:8080
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 8081 -j DNAT --to-destination 192.168.7.2:8081
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 8070 -j DNAT --to-destination 192.168.7.3:8070
iptables -t nat -A PREROUTING -p tcp -d xxx.xxx.xxx.xx --dport 9000 -j DNAT --to-destination 192.168.7.3:9000

# Redireccionamiento de Puertos UDP


# PUERTOS TELNET
#iptables -A INPUT -s 192.168.2.0/24 -p tcp --dport 22:23 -j ACCEPT
#iptables -A INPUT -s 192.168.3.0/24 -p tcp --dport 22:23 -j ACCEPT
#iptables -A INPUT -s 192.168.4.0/24 -p tcp --dport 22:23 -j ACCEPT
#iptables -A INPUT -s 192.168.5.0/24 -p tcp --dport 22:23 -j ACCEPT

# Cerrar Puertos
iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 10000 -j DROP
iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 22 -j DROP

## Enmascarar todo lo que salga por eth0 proveniente de la red local.
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -o eth0 -j MASQUERADE
iptables -t nat -A POSTROUTING -s 192.168.7.0/24 -o eth0 -j MASQUERADE

echo " OK "
echo "Verifique que lo que se aplica con: iptables -L -n"

if you can add me to your messenger my email is juan_alberto_ojeda@hotmail.com so I can better target

Thanks!!

[Ghostdare]

I'm not an IPTABLES familiar but try to stop this service, for testing only, and give a try. maybe somebody else will give you an opinion about your configuration.