Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > General

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 30th October 2010, 01:51
Nachogrande Nachogrande is offline
Junior Member
 
Join Date: Oct 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default F11 courier-imap fails.

Hey all.. So I'm at this step in the manual:

Quote:
Now we go back to the $HOME/downloads directory and run rpmbuild again, this time without sudo, otherwise the compilation will fail because it was run as root:

Code:
cd $HOME/downloads
rpmbuild -ta courier-imap-4.4.1.tar.bz2
I am doing it as compileuser, per the instructions (NOT ROOT!!), but it is failing.

sorry in advance for the lengthy post - Apparently this forum does not use the 'spoiler' bbcode feature to 'hide' long code snippets etc..
[spoiler]cp -f imap/mkpop3dcert.8 .
cp ./maildir/maildirkw.1 .
cp imap/imapd.dist .
cp imap/imapd-ssl.dist .
cp imap/pop3d.dist .
cp imap/pop3d-ssl.dist .
cp imap/imapd.cnf .
cp imap/pop3d.cnf .
cp -f ./maildir/quotawarnmsg quotawarnmsg.example
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1'
+ /usr/bin/make check
Making check in numlib
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/numlib'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/numlib'
Making check in md5
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/md5'
./md5test | cmp -s - ./md5test.txt
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/md5'
Making check in sha1
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/sha1'
./testsuite | cmp -s - ./testsuite.txt
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/sha1'
Making check in bdbobj
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/bdbobj'
./testsuite | cmp -s - ./testsuite.txt
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/bdbobj'
Making check in gdbmobj
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/gdbmobj'
./testsuite | cmp -s - ./testsuite.txt
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/gdbmobj'
Making check in soxwrap
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/soxwrap'
./testprog
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/soxwrap'
Making check in unicode
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/unicode'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/unicode'
Making check in rfc822
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822'
/usr/bin/make check-am
make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822'
./testsuite | cmp -s - ./testsuite.txt
./reftest | cmp -s - ./reftest.txt
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822'
Making check in random128
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/random128'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/random128'
Making check in rfc1035
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc1035'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc1035'
Making check in rfc2045
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045'
/usr/bin/make check-am
make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045'
/bin/sh ./testsuite | cmp -s - ./testsuite.txt.idn
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045'
Making check in liblock
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/liblock'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/liblock'
Making check in maildir
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir'
/usr/bin/make check-am
make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir'
/bin/sh ./testsuite 2>&1 | cmp - ./testsuite.txt
test "-lpcre" != "" || exit 0 ; /bin/sh ./testsuite2 2>&1 | cmp - ./testsuite2.txt
LC_ALL=C; export LC_ALL; ./maildirkwtest | cmp -s - ./maildirkwtest.txt
LC_ALL=C; export LC_ALL; ./maildiraclttest
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir'
Making check in makedat
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/makedat'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/makedat'
Making check in libhmac
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/libhmac'
test ! -x ./md5hmactest || ./md5hmactest | cmp -s - ./md5hmactest.txt
test ! -x ./sha1hmactest || ./sha1hmactest | cmp -s - ./sha1hmactest.txt
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/libhmac'
Making check in waitlib
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/waitlib'
./testwait
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/waitlib'
Making check in tcpd
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd'
/usr/bin/make check-am
make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd'
sh ./testsuite 2>&1 | cmp -s - ./testsuite.txt
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd'
Making check in rootcerts
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rootcerts'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rootcerts'
Making check in imap
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap'
/usr/bin/make check-am
make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap'
LC_ALL=C; export LC_ALL; ./testsuite | ./testsuitefix.pl | sort | cmp -s - ./testsuite.txt
****************************
* Sanity check in progress *
****************************
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=90, body=2398, rcvd=764, sent=9134, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=218, body=0, rcvd=1046, sent=2769, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=73, sent=459, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=249, sent=889, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=97, sent=532, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=61, sent=437, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=203, sent=1157, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=214, sent=893, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=517, sent=3430, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=29, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=29, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=50, sent=769, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=50, sent=841, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=368, sent=2049, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=148, body=0, rcvd=572, sent=1294, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=186, sent=756, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=67, sent=388, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=691, sent=3154, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=181, sent=641, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=33, sent=111, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=139, sent=702, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=156, sent=641, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=672, sent=3060, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=238, sent=975, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=2412, sent=11939, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=156, rcvd=1397, sent=7555, time=0
INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=155, sent=485, time=0
INFO: LOGIN, user=user2, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user2, ip=[127.0.0.1], headers=0, body=0, rcvd=117, sent=317, time=0
INFO: LOGIN, user=user0, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user0, ip=[127.0.0.1], headers=0, body=0, rcvd=109, sent=677, time=0
INFO: LOGIN, user=user2, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user2, ip=[127.0.0.1], headers=0, body=0, rcvd=896, sent=3055, time=0
INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=135, sent=720, time=0
INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=464, sent=2582, time=0
INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=404, sent=1888, time=0
LC_ALL=C; export LC_ALL; test "yes" = "yes" || exit 0; /bin/sh ./smaptestsuite | ./testsuitefix.pl | sort | cmp -s - ./smaptestsuite.txt
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=65, sent=3023, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=44, sent=175, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=1179, body=461, rcvd=565, sent=3171, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=18, body=5962, rcvd=665, sent=7765, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=164, sent=67564, time=1
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=2346, sent=11641, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=1118, sent=3783, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=124, sent=591, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=20, sent=110, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=161, sent=722, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=308, sent=1640, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=28, sent=128, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=1195, body=0, rcvd=355, sent=2038, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=379, sent=1353, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=334, sent=1107, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=45, sent=167, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=81, sent=824, time=0
INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=140, sent=488, time=0
INFO: LOGIN, user=confmdtest, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=confmdtest, ip=[127.0.0.1], headers=0, body=0, rcvd=2491, sent=6268, time=0
INFO: LOGIN, user=confmdtest, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=confmdtest, ip=[127.0.0.1], headers=0, body=0, rcvd=26, sent=610, time=0
make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap'
make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1'
make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UK4wcF
+ umask 022
+ cd /home/compileuser/rpm/BUILD
+ '[' /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386 '!=' / ']'
+ rm -rf /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386
++ dirname /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386
+ mkdir -p /home/compileuser/rpm/BUILDROOT
+ mkdir /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386
mkdir: cannot create directory `/home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386': Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.UK4wcF (%install)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.UK4wcF (%install)
[compileuser@linsrv downloads]$ sudo rpmbuild -ta courier-imap-4.8.1.tar.bz2
[sudo] password for compileuser:
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.keNm3H
+ umask 022
+ cd /home/compileuser/rpm/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/compileuser/rpm/BUILD
+ rm -rf courier-imap-4.8.1
+ /usr/bin/bzip2 -dc /home/compileuser/downloads/courier-imap-4.8.1.tar.bz2
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd courier-imap-4.8.1
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables -I/usr/lib/courier-imap/lib/gfortran/modules'
+ export FFLAGS
+ ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-redhat-linux-gnu --program-prefix= --prefix=/usr/lib/courier-imap --exec-prefix=/usr/lib/courier-imap --bindir=/usr/lib/courier-imap/bin --sbindir=/usr/lib/courier-imap/sbin --sysconfdir=/usr/lib/courier-imap/etc --datadir=/usr/lib/courier-imap/share --includedir=/usr/lib/courier-imap/include --libdir=/usr/lib/courier-imap/lib --libexecdir=/usr/lib/courier-imap/libexec --localstatedir=/var/run --sharedstatedir=/var/lib --mandir=/usr/lib/courier-imap/man --infodir=/usr/share/info --with-redhat
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for gawk... (cached) gawk
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for perl5... no
checking for perl... /usr/bin/perl
checking for sysconftool...... ././sysconftool
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1966080
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for i686-pc-linux-gnu-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for i686-pc-linux-gnu-ar... no
checking for ar... ar
checking for i686-pc-linux-gnu-strip... no
checking for strip... strip
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for env... /bin/env
configure: WARNING: === Do not compile Courier-IMAP as root. Compile
configure: WARNING: === Courier-IMAP as a non-root user then su to
configure: WARNING: === root before running make install. You must now
configure: WARNING: === remove this entire directory and then extract the
configure: WARNING: === source code from the tarball as a non-root user
configure: WARNING: === and rerun the configure script. If you have read
configure: WARNING: === the INSTALL file you should have known this. So
configure: WARNING: === you better read INSTALL again.
configure: error: aborted.
error: Bad exit status from /var/tmp/rpm-tmp.keNm3H (%prep)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.keNm3H (%prep)
[compileuser@linsrv downloads]$ sudo rpmbuild -ta courier-imap-4.8.1.tar.bz2
[sudo] password for compileuser:
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qZAMSF
+ umask 022
+ cd /home/compileuser/rpm/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/compileuser/rpm/BUILD
+ rm -rf courier-imap-4.8.1
+ /usr/bin/bzip2 -dc /home/compileuser/downloads/courier-imap-4.8.1.tar.bz2
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd courier-imap-4.8.1
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables -I/usr/lib/courier-imap/lib/gfortran/modules'
+ export FFLAGS
+ ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-redhat-linux-gnu --program-prefix= --prefix=/usr/lib/courier-imap --exec-prefix=/usr/lib/courier-imap --bindir=/usr/lib/courier-imap/bin --sbindir=/usr/lib/courier-imap/sbin --sysconfdir=/usr/lib/courier-imap/etc --datadir=/usr/lib/courier-imap/share --includedir=/usr/lib/courier-imap/include --libdir=/usr/lib/courier-imap/lib --libexecdir=/usr/lib/courier-imap/libexec --localstatedir=/var/run --sharedstatedir=/var/lib --mandir=/usr/lib/courier-imap/man --infodir=/usr/share/info --with-redhat
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for gawk... (cached) gawk
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for perl5... no
checking for perl... /usr/bin/perl
checking for sysconftool...... ././sysconftool
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1966080
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for i686-pc-linux-gnu-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for i686-pc-linux-gnu-ar... no
checking for ar... ar
checking for i686-pc-linux-gnu-strip... no
checking for strip... strip
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for env... /bin/env
configure: WARNING: === Do not compile Courier-IMAP as root. Compile
configure: WARNING: === Courier-IMAP as a non-root user then su to
configure: WARNING: === root before running make install. You must now
configure: WARNING: === remove this entire directory and then extract the
configure: WARNING: === source code from the tarball as a non-root user
configure: WARNING: === and rerun the configure script. If you have read
configure: WARNING: === the INSTALL file you should have known this. So
configure: WARNING: === you better read INSTALL again.
configure: error: aborted.
error: Bad exit status from /var/tmp/rpm-tmp.qZAMSF (%prep)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.qZAMSF (%prep)
[compileuser@linsrv downloads]$
[/spoiler]
There were a couple attempts there.. The first one (initial attempt) gave me a permission denied error in a folder compileuser should own... (mkdir: cannot create directory `/home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386': Permission denied)
Reply With Quote
Sponsored Links
  #2  
Old 30th October 2010, 14:57
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

What's the output of
Code:
ls -la /home/compileuser/rpm/BUILDROOT/
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 30th October 2010, 19:00
Nachogrande Nachogrande is offline
Junior Member
 
Join Date: Oct 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Okay, I thought I saw where we were going with this, most of the files were owned by root, so I did a chown -R on that directory, and re-ran the rpmbuild -ta command on the imap file.. Here is what I get:

Code:
rm: cannot remove `courier-imap-4.8.1/rfc2045/testsuite.txt.noidn': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/makemime.1': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/base64.h': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045acchk.c': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/base64.c': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045acprep.c': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045decodemimesectionu.c': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045header.c': Permission denied
rm: cannot remove `courier-imap-4.8.1/rfc2045/makemime.c': Permission denied
error: Bad exit status from /var/tmp/rpm-tmp.oTwkRU (%prep)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.oTwkRU (%prep)
[compileuser@linsrv downloads]$ ls -l /var/tmp
total 64
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:45 rpm-tmp.cR7RI2
-rw------- 1 root        root        3645 2010-10-29 14:34 rpm-tmp.EAKuDS
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:25 rpm-tmp.i2Tjqp
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:43 rpm-tmp.jXiPSs
-rw------- 1 root        root        2476 2010-10-29 16:24 rpm-tmp.keNm3H
-rw------- 1 root        root        3645 2010-10-29 15:13 rpm-tmp.kZdqr9
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:42 rpm-tmp.LZiKKX
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:50 rpm-tmp.oTwkRU
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:40 rpm-tmp.q3Qjt7
-rw------- 1 compileuser compileuser 2476 2010-10-30 09:41 rpm-tmp.qsJ0t6
-rw------- 1 root        root        2476 2010-10-29 16:29 rpm-tmp.qZAMSF
-rw------- 1 compileuser compileuser 6085 2010-10-29 16:20 rpm-tmp.UK4wcF
drwx------ 2 compileuser compileuser 4096 2010-10-29 15:07 yum-compileuser-l4jaUy
drwx------ 3 Rooster     Rooster     4096 2010-10-01 23:35 yum-Rooster-hf4FCN
drwx------ 3 trin        trin        4096 2010-10-20 18:45 yum-trin-bO_5e7
[compileuser@linsrv downloads]$
There are several hundred lines of that, I just snipped it.. So I check the /var/tmp folder, and sure enough as you can see, the tmp folder it complains about IS owned by compileuser.

Additionally:
Code:
[compileuser@linsrv downloads]$ ls -l
total 17708
-rw-rw-r-- 1 compileuser compileuser 7107206 2010-10-11 18:24 courier-0.65.1.20101011.tar.bz2
-rw-rw-r-- 1 compileuser compileuser 2817119 2009-12-29 18:51 courier-authlib-0.63.0.tar.bz2
-rw-rw-r-- 1 compileuser compileuser 3352500 2010-10-04 16:47 courier-imap-4.8.1.tar.bz2
-rw-rw-r-- 1 compileuser compileuser 2422151 2010-10-04 16:44 maildrop-2.5.1.tar.bz2
-rw-rw-r-- 1 compileuser compileuser 2422151 2010-10-04 16:44 maildrop-2.5.1.tar.bz2.1
[compileuser@linsrv downloads]$
the files in the downloads are also owned by compileuser.. Though, the top four files in that list are red, and the 5th (maildrop) is black, in the filename portion..

Help? FWIW - I have tried it numerous times, I was chmod'ing the /var/tmp folder it complained about to compileuser and re-running to no avail. That was when I finally noticed after copy/pasting the /tmp directory that it was making new folders, and that they DID have what I think to be proper ownership.


Thanks!
Reply With Quote
  #4  
Old 31st October 2010, 12:31
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

What's the output of
Code:
getenforce
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 31st October 2010, 19:43
Nachogrande Nachogrande is offline
Junior Member
 
Join Date: Oct 2010
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

It says:
disabled.
Reply With Quote
  #6  
Old 1st November 2010, 09:03
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 34,586
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

If you can not compile courier on your system, you can use dovecot instead. As it can be sometimes tricky to compile courier on fedor and as there are no rpm packages available, we switched to dovecot in the latest installation guides (for Fedora 13):

http://www.howtoforge.com/perfect-se...ispconfig-3-p4

I guess that the setup should work for fedora 11 as well if you use the fedora 13 guide.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ERROR: Connection dropped by IMAP server. [Centos 5.4, courier imap,squirrel, etc] darevil HOWTO-Related Questions 7 9th June 2010 14:49
Anyway to fix the courier imap quota integer overflow? CarbonCopy Server Operation 4 9th August 2009 13:37
Courier IMAP / POP3 error when re-creating ssl certificate Debian2009 Server Operation 4 24th April 2009 02:47
Help on migrate from courier to imap atrus HOWTO-Related Questions 0 16th March 2008 10:33
Courier IMAP - when does it delete deleted messages?? hagel Server Operation 3 18th August 2005 23:52


All times are GMT +2. The time now is 05:48.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.