Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Server Operation

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 22nd April 2006, 14:10
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default Server sometimes (1 or 2 hrs) down :/

Hi all,

For some reason (I think some eth0 network problem) my server is sometimes not accessible anymore for some hrs! (it does fix itself (sometimes))

1st I thought that it was some programe running on a cron job, but now (with help of Munin) I think I found the problem.

When the server is not accessible anymore Munin is logging eth0 errors (see image)



This is how eth0 looks normal



The server is using Fedora RC4 with ISPconfig, and the Firewall that comes with ISPconfig.

Anyone here who might know what could cause this eth0 error, and how I can fix it?

Last edited by edge; 22nd April 2006 at 14:13.
Reply With Quote
Sponsored Links
  #2  
Old 22nd April 2006, 15:28
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,722 Times in 2,563 Posts
Default

Any errors in the logs?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 22nd April 2006, 15:37
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default

Quote:
Originally Posted by falko
Any errors in the logs?
Hi falko,

I've had a look at the logs, but did not see anything special! (lot's of info, so I might have missed it)

Also.. I'm not sure what log to look at! Is there a log that is logging all the eth0 data?

I really need to get this fixed a.s.a.p as sometimes the server will work again after some time, and sometimes it does not..
As I'm off to the US over 1 week (for 3 weeks) I can not reset the server by hand :/
Reply With Quote
  #4  
Old 22nd April 2006, 16:46
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,722 Times in 2,563 Posts
Default

Does your kernel use the correct driver for your network card? What kind of network card is it (model)?
Do you see errors related to eth0 when you run
Code:
dmesg
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 22nd April 2006, 17:14
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default

The server is a Dell PowerEdge SG1425.

the NIC is/are
Quote:
Dual embedded Intel Gigabit2 NICs with failover support; single and dual port Intel PRO/1000 MT adapters (copper)
(2 x Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05))
note: I'm only using one NIC

re: dmesg

Lot's of info from dmesg :/

Part 1 of dmesg

Code:
Linux version 2.6.15-1.1831_FC4smp (bhcompile@tweety.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Tue Feb 7 13:48:31 EST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 00000000dffc0000 (usable)
 BIOS-e820: 00000000dffc0000 - 00000000dffcfc00 (ACPI data)
 BIOS-e820: 00000000dffcfc00 - 00000000dffff000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
3712MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 1179648
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 950272 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL                                  ) @ 0x000fd650
ACPI: RSDT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd664
ACPI: FADT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd6b0
ACPI: MADT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd724
ACPI: SPCR (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd7c0
ACPI: HPET (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd810
ACPI: MCFG (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x000fd848
ACPI: DSDT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC enabled (0).
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55
ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[64])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 3 I/O APICs
ACPI: HPET id: 0xffffffff base: 0xfed00000
LAPIC enabled (0), calling get_smp_config
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec80800)
Initializing CPU#0
CPU 0 irqstacks, hard=c045f000 soft=c043f000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4134948k/4718592k available (2233k kernel code, 57816k reserved, 837k data, 228k init, 3276544k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2800.182 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5604.64 BogoMIPS (lpj=11209282)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0460000 soft=c0440000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5600.53 BogoMIPS (lpj=11201077)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c0461000 soft=c0441000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5600.40 BogoMIPS (lpj=11200804)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c0462000 soft=c0442000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5600.42 BogoMIPS (lpj=11200857)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03
Total of 4 processors activated (22406.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1150k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc3de, last bus=4
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:04:0d.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12)

Last edited by edge; 22nd April 2006 at 23:48.
Reply With Quote
  #6  
Old 22nd April 2006, 17:14
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default

Part 2 of dmesg

Code:
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:05: ioport range 0x800-0x87f could not be reserved
pnp: 00:05: ioport range 0x880-0x8bf has been reserved
pnp: 00:05: ioport range 0x8c0-0x8df has been reserved
pnp: 00:05: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:05: ioport range 0xc00-0xc0f has been reserved
pnp: 00:05: ioport range 0xc10-0xc1f has been reserved
pnp: 00:05: ioport range 0xca0-0xcaf has been reserved
pnp: 00:05: ioport range 0xc20-0xc3f has been reserved
PCI: Bridge: 0000:01:00.0
  IO window: e000-efff
  MEM window: fe600000-fe7fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.2
  IO window: d000-dfff
  MEM window: fd000000-fdffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
  IO window: d000-efff
  MEM window: fd000000-fe7fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: fe900000-feafffff
  PREFETCH window: f0000000-f7ffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Setting latency timer of device 0000:01:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1145721008.892:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key BBAAC218B8690C98
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Intel E7520/7320/7525 detected.<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices: 
PCI0 PALO  PXH PXHB PXHA PICH 
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 343k
SCSI subsystem initialized
3ware Storage Controller device driver for Linux v1.26.02.001.
ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 66 (level, low) -> IRQ 185
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xdcf0, IRQ: 185.
  Vendor: 3ware     Model: Logical Disk 0    Rev: 1.2 
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 234439600 512-byte hdwr sectors (120033 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234439600 512-byte hdwr sectors (120033 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
floppy0: no floppy controllers found
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 32 (level, low) -> IRQ 193
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 20 (level, low) -> IRQ 201
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
hw_random hardware driver 1.0.0 loaded
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfeb00000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bce0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000bcc0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
ACPI: Video Device [EVGA] (multi-head: no  rom: yes  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cdrom: open failed.
cdrom: open failed.
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 787176k swap on /dev/sda3.  Priority:-1 extents:1 across:787176k
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
i2c /dev entries driver
lp: driver loaded but no devices found
eth0: no IPv6 routers present
ip_tables: (C) 2000-2002 Netfilter core team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
and this is the output for /sbin/lspci

Code:
00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 09)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
02:04.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
03:07.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
04:03.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
04:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
I hope it's of some use to you.. It's NOT for me :/

Last edited by edge; 22nd April 2006 at 23:46.
Reply With Quote
  #7  
Old 31st July 2006, 10:59
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default

dusti,

Are you using any virtual IP's / NIC's? If so.. remove all of them (only use the main NIC with one IP), and see if you still have the problem. If not, add one virtual IP / NIC, and see if all is still okay. etc ect.. I think that in my case one of the virtual IP's was causing the problem.

An other thing I did (as backup) was that I made a script pinging the gateway ever 5 minutes.. When it did not get a reply, it did a network restart.. After the network restart the network was working fine again.

btw. I'm now not using Fedora anymore (it's Debian now), and all is working fine with my Dell PowerEdge and it's 16 IP's

Last edited by edge; 31st July 2006 at 11:03.
Reply With Quote
  #8  
Old 31st July 2006, 11:50
dusti dusti is offline
Junior Member
 
Join Date: Jul 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I am not using virtual IP's, at the moment I only need 1,
Later this week I'll try the driver rpm I got with the machine, see what that gives. I know debian is sometimes better, somethimes fedora is better,
anyway, I just have to run fedora/redhat-based here.
I also could try to add a virtual nic and see if that one is doing a better job
Reply With Quote
  #9  
Old 31st July 2006, 13:44
edge edge is offline
Moderator
 
Join Date: Dec 2005
Location: The Netherlands
Posts: 2,033
Thanks: 261
Thanked 147 Times in 128 Posts
Default

dusti,

please do not get me wrong with the Fedora v/s Debian. I have an other server running Fedora, and both are great OS'es!

The reason I installed Debian on that server was only to try an other OS!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Statistic not working mzo Installation/Configuration 49 20th April 2011 12:19
ispconfig and mambo shajazzi Installation/Configuration 70 28th March 2006 19:29
server blocked/stopped by host Ovidiu Technical 11 14th February 2006 10:50
Email - Ueb-Miau mazhar Installation/Configuration 5 21st December 2005 10:01
Server Not Autorative for Domain Error drbista Installation/Configuration 10 20th December 2005 16:41


All times are GMT +2. The time now is 20:07.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.