SystemImager Falko-Way

[pureblood]

Hey everybody, this is my first one over here, so upfront:
great site so far and man I really spent a lot of hours already trying out the most of the how tos, not that they are so fdifficult but most of all they very interesting and many of them available;-).

To the point:
I tried to figure out http://www.howtoforge.org/dedicated_...e_systemimager
but it fails with

@ERROR: Unknown module 'scripts'
rsync error: error starting client-server protocol (code 5) at main.c(1171)
ERROR: rsync of the master script failed!

So I took a look at the script itself and found this line

rsync $image_server::scripts/$image_name.master /tmp

to be honest I have no clue what thi ":scripts" should be and why there is a ".master" behind the image variable

One would think the command should be s.t. like
"rsync -r $image_server:/var/lib/systemimager/images/$image_name /tmp"

So I guess the error is somewhere there ..

Would be amazing if some of you guys could gimme a hint ;-)
thanks in advance

[falko]

Please post the output of

ls -la /var/lib/systemimager

on the image server.

[pureblood]

XANDROSII:~# ls -la /var/lib/systemimager
insgesamt 1
drwxr-xr-x 5 root root 128 2006-03-20 08:39 .
drwxr-xr-x 32 root root 856 2006-03-20 08:39 ..
drwxr-xr-x 3 root root 192 2006-03-20 08:48 images
drwxr-xr-x 3 root root 96 2006-03-20 09:03 overrides
drwxr-xr-x 4 root root 144 2006-03-20 09:03 scripts

[pureblood]

ok this hints me to edit the ::scripts with my real directory which is /var/lib/scripts

I edited your script and now i get this

--13:43:51--  http://www.falkotimme.com/howtos/dedicated_server_backup_restore_systemimager/functions
           => `functions'
Resolving www.falkotimme.com... 81.169.182.36
Connecting to www.falkotimme.com[81.169.182.36]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34,564 [text/plain]

100%[=================================================================================>] 34,564        --.--K/s

13:43:51 (3.63 MB/s) - `functions' saved [34564/34564]

mv: cannot move `functions' to `/etc/init.d/functions': No such file or directory
/tmp/my_image.master: line 13: /etc/init.d/functions: No such file or directory

btw I also use a strato server but the rescue system does not seem to be busy box .. this maybe a problem right?

ok next thing I now just made an mkdir /etc/init.d/ so your skript can work

but next failure is this

--13:58:51--  http://www.falkotimme.com/howtos/dedicated_server_backup_restore_systemimager/functions
           => `functions'
Resolving www.falkotimme.com... 81.169.182.36
Connecting to www.falkotimme.com[81.169.182.36]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34,564 [text/plain]

100%[=================================================================================>] 34,564        --.--K/s

13:58:51 (9.15 MB/s) - `functions' saved [34564/34564]


get_arch
Partitioning /dev/sda...
Old partition table for /dev/sda:
Error: Error opening /dev/sda: No such device or address
parted -s -- /dev/sda mklabel msdos || shellout
Error: Error opening /dev/sda: No such device or address
Killing off running processes.
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
udp-receiver: no process killed
rsync: no process killed

write_variables
\s \r \m\ \n
LFS based rescue system

ok this is caused because my image originated from an sda install and the server only has a hda
so I just changed the sda`s with hda`s

but now I ended up here

: bad interpreter: No such file or directory

I think this is caused by this

::${IMAGENAME}/

part in the my_image.master
and I am sure it fails for the same reason like the script failed in the first place above where I replaced
::scripts with my real directory which is /var/lib/scripts

but I dont know why this doesnt work out of the box ?
what do the two colons mean?

[falko]

Originally Posted by pureblood

but now I ended up here

: bad interpreter: No such file or directory

I guess you have edited the file on Windows and then transferred it back to your server? Make sure you save the file with Unix linebreaks, not Windows linebreaks.

[pureblood]

hmm ok so i started it all over again, I did edit the files in windoze, because the f.... up vi on the rescue system didnt let me to.


but the root of all evil still seems to be the following notation

rsync $image_server::scripts/$image_name.master /tmp

could you please explain to me why there are two colons right one after another?

::

maybe this is just damn easy but I ve never encountered such a notation I am just familiar with

rsync $image_server:/scripts/$image_name.master /tmp

Is this some kind of shortened way for a path?

And man, thanks so far for your quick replies and your kind help.
It is great to have such support in ones learning process


ADDED:
I asked around a bit and looked at the rsync man pages and there I found that the

rsync HOST::SRC DEST

and that this requires a rsync daemon....

so I guess for your script to work a rsync daemon must be running?