Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 14th March 2006, 01:17
danf.1979 danf.1979 is offline
Senior Member
 
Join Date: Dec 2005
Location: Chile
Posts: 247
Thanks: 4
Thanked 3 Times in 2 Posts
Send a message via MSN to danf.1979
Default ISPConfig 2.2.0 - Unrecoverable error during installation

Hi, look what happened to me:

Code:
'/home/admispconfig/ispconfig/tools/clamav/lib/pkgconfig/libclamav.pc'
make[2]: Leaving directory `/home/dan/install_ispconfig/compile_aps/clamav-0.88'
make[1]: Leaving directory `/home/dan/install_ispconfig/compile_aps/clamav-0.88'
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system]

NOTE: settings for "make test" are now controlled using "t/config.dist".
See that file if you wish to customise what tests are run, and how.

checking module dependencies and their versions...

***************************************************************************
ERROR: the required Digest::SHA1 module is not installed.

  The Digest::SHA1 module is used as a cryptographic hash for some
  tests and the Bayes subsystem.  It is also used by Razor2.


***************************************************************************
ERROR: the required HTML::Parser (version 3.24) module is not installed.

  Version 3.31 or later is recommended.

  HTML is used for an ever-increasing amount of email so this dependency
  is unavoidable.  Run "perldoc -q html" for additional information.


***************************************************************************
NOTE: the optional Net::DNS (version 0.34) module is not installed.

  Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
  perform MX checks, and is also used when manually reporting spam to
  SpamCop.  Recommended.

  If this is installed and you are using network tests of any variety
  (which is the default), then you need to make sure the Net::DNS
  version is sufficiently up-to-date:

  - version 0.34 or higher on Unix systems
  - version 0.46 or higher on Windows systems


***************************************************************************
NOTE: the optional Mail::SPF::Query module is not installed.

  Used to check DNS Sender Policy Framework (SPF) records to fight email
  address forgery and make it easier to identify spams.


***************************************************************************
NOTE: the optional IP::Country module is not installed.

  Used by the RelayCountry plugin (not enabled by default) to determine
  the domain country codes of each relay in the path of an email.


***************************************************************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

  Used to check message signatures against Vipul's Razor collaborative
  filtering network. Razor has a large number of dependencies on CPAN
  modules. Feel free to skip installing it, if this makes you nervous;
  SpamAssassin will still work well without it.

  More info on installing and using Razor can be found
  at http://wiki.apache.org/spamassassin/InstallingRazor .


***************************************************************************
NOTE: the optional Net::Ident module is not installed.

  If you plan to use the --auth-ident option to spamd, you will need
  to install this module.


***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.

  This is required if the first nameserver listed in your IP
  configuration or /etc/resolv.conf file is available only via
  an IPv6 address.


***************************************************************************
NOTE: the optional IO::Socket::SSL module is not installed.

  If you wish to use SSL encryption to communicate between spamc and
  spamd (the --ssl option to spamd), you need to install this
  module. (You will need the OpenSSL libraries and use the
  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
  compatibile spamc.)


***************************************************************************
NOTE: the optional LWP::UserAgent module is not installed.

  The "sa-update" script requires this module to make HTTP requests.


***************************************************************************
NOTE: the optional HTTP::Date module is not installed.

  The "sa-update" script requires this module to make HTTP
  If-Modified-Since GET requests.


***************************************************************************
NOTE: the optional Archive::Tar module is not installed.

  The "sa-update" script requires this module to access tar update
  archive files.


***************************************************************************
NOTE: the optional IO::Zlib module is not installed.

  The "sa-update" script requires this module to access compressed
  update archive files.

REQUIRED module missing: Digest::SHA1
REQUIRED module missing: HTML::Parser
optional module missing: Net::DNS
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Archive::Tar
optional module missing: IO::Zlib

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/aps.tar.gz»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/spamassassin.tar.gz»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/uudeview.tar.gz»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/clamav.tar.gz»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/cronolog»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/cronosplit»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/ispconfig_tcpserver»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/zip»: No existe el fichero o el directorio
mv: no se puede efectuar `stat' sobre «binaries/unzip»: No existe el fichero o el directorio
tar: spamassassin.tar.gz: No se puede open: No existe el fichero o el directorio
tar: El error no es recuperable: salida ahora
tar: Child returned status 2
tar: Salida con error demorada desde errores anteriores
mv: no se puede efectuar `stat' sobre «spamassassin»: No existe el fichero o el directorio
tar: uudeview.tar.gz: No se puede open: No existe el fichero o el directorio
tar: El error no es recuperable: salida ahora
tar: Child returned status 2
tar: Salida con error demorada desde errores anteriores
mv: no se puede efectuar `stat' sobre «uudeview»: No existe el fichero o el directorio
tar: clamav.tar.gz: No se puede open: No existe el fichero o el directorio
tar: El error no es recuperable: salida ahora
tar: Child returned status 2
tar: Salida con error demorada desde errores anteriores
mv: no se puede efectuar `stat' sobre «clamav»: No existe el fichero o el directorio
tar: aps.tar.gz: No se puede open: No existe el fichero o el directorio
tar: El error no es recuperable: salida ahora
tar: Child returned status 2
tar: Salida con error demorada desde errores anteriores
./setup2: line 777: ispconfig_tmp/php/bin/php: No existe el fichero o el directorio
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!


Ubuntu breezy here.
Reply With Quote
Sponsored Links
  #2  
Old 14th March 2006, 07:04
gfts gfts is offline
Junior Member
 
Join Date: Dec 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have had the same problem initially, what i had to do, was to install spamAssassin.

Just install spam assassin, and it will take care of all the related software for spamassassin.

For ubuntu, i guess, the commandline is
apt-get install spamassassin.

Regards
Reply With Quote
  #3  
Old 14th March 2006, 08:48
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,704
Thanks: 819
Thanked 5,320 Times in 4,173 Posts
Default

It is not nescessary to install spamassassin. Just install the missing perl modules as described in the ISPConfig installation manual:

http://www.ispconfig.org/manual_installation.htm

It is also described in the ubuntu Howto, at the end of this page:

http://www.howtoforge.com/perfect_setup_ubuntu_5.10_p5

Quote:
Install some Perl Modules needed by SpamAssassin (comes with ISPConfig)

apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISPConfig 2.2.0 released till General 17 7th April 2006 04:39
Add DNS to a "Virtual Users And Domains" installation, and finish with ISPConfig Nuxeretes Installation/Configuration 4 2nd March 2006 14:02
ISPCONFIG installation problem with Fedora Core 4 (64 bit) dchowdhu Installation/Configuration 5 25th January 2006 06:21
Installation Of Ispconfig snake911 Installation/Configuration 31 8th December 2005 10:33
Changing values on ISPConfig installation Luciano Installation/Configuration 4 16th August 2005 23:32


All times are GMT +2. The time now is 22:08.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.