#1  
Old 20th April 2007, 21:15
edo660 edo660 is offline
Junior Member
 
Join Date: Apr 2007
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default install fails, debian etch 4.0

Hi there, been using these how-to's for ages now with great success...until now.

trying to get ISPconfig working on my friends VPS, using debian etch. i follow the debian etch guide to the T, but when it gets pretty far into the install process it fails with this being the last few lines.

./setup2: line 862: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

last i tried ispconfig was about a year ago with debian sarge, and it worked perfectly back then so not too sure what the problem is here... any help greatly appreciated.

Edo
Reply With Quote
Sponsored Links
  #2  
Old 21st April 2007, 13:18
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,740 Times in 2,575 Posts
Default

Did you see nay error message prior to the one you posted?
From which directory did you try to install ISPConfig?
What's the output of
Code:
df -h
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 21st April 2007, 15:03
edo660 edo660 is offline
Junior Member
 
Join Date: Apr 2007
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
Did you see nay error message prior to the one you posted?
From which directory did you try to install ISPConfig?
What's the output of
Code:
df -h
?
there are a few error's relating to not being able to find binaries of spamassin and clamav i think (though its not apparently needed i thought?) . and there is plenty of free disk space, around 5.5gb to be exact. it's a fresh install, with just debian minimal and then followed the usual guide

installing it from /root/ , should it be somewhere else?

these are some errors
Code:
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory

Last edited by edo660; 21st April 2007 at 15:28.
Reply With Quote
  #4  
Old 21st April 2007, 20:45
edo660 edo660 is offline
Junior Member
 
Join Date: Apr 2007
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default

hmmm i installed it from another users directory, and it has worked...they should really mention something about that in the install doc's (and maybe in the how-to from here itself?)
Reply With Quote
  #5  
Old 22nd April 2007, 23:13
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,740 Times in 2,575 Posts
Default

You can install ISPConfig from any directory except /root/ispconfig and /home/admispconfig.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #6  
Old 23rd April 2007, 04:22
Joffar Joffar is offline
Member
 
Join Date: Feb 2006
Posts: 30
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have the same problem... I tried to upgrade from the same directory as I installed ver 2.2.3 (/root/) and got the php error. I tried again from another dir /ISP/ but with the same result. Here is the error during the install:

Not sure why it is trying to configure Apache 1.3.37, when Apache2 is installed on the previous version...
Code:
Configuring mod_ssl/2.8.28 for Apache/1.3.37
 + Apache location: ../apache_1.3.37 (Version 1.3.37)
 + OpenSSL location: /root/ispconfig/openssl
 + Auxiliary patch tool: ./etc/patch/patch (local)
 + Applying packages to Apache source tree:
   o Extended API (EAPI)
   o Distribution Documents
   o SSL Module Source
   o SSL Support
   o SSL Configuration Additions
   o SSL Module Documentation
   o Addons
Done: source extension and patches successfully applied.

Configuring for Apache, Version 1.3.37
 + Warning: Your 'echo' command is slightly broken.
 + It interprets escape sequences per default. We already
 + tried 'echo -E' but had no real success. If errors occur
 + please set the SEO variable in 'configure' manually to
 + the required 'echo' options, i.e. those which force your
 + 'echo' to not interpret escape sequences per default.
 + using installation path layout: Apache (config.layout)
Creating Makefile
Creating Configuration.apaci in src
Syntax error --- The configuration file is used only to
define the list of included modules or to set Makefile in src
options or Configure rules, and I don't see that at all:
/root/ispconfig/openssl
yes
default
no
no
no
 `$(SRCDIR)/apaci`
no
default
default
no
no
no
yes
no
default
no
default
default

./configure:Error: APACI failed
ERROR: Could not configure Apache
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 862: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Here is the outpu from df -h:
Code:
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/Root-root
                       25G  4.1G   20G  18% /
varrun                 78M  148K   78M   1% /var/run
varlock                78M  4.0K   78M   1% /var/lock
procbususb             78M  112K   78M   1% /proc/bus/usb
udev                   78M  112K   78M   1% /dev
devshm                 78M     0   78M   0% /dev/shm
lrm                    78M   34M   44M  44% /lib/modules/2.6.20-15-386/volatile
/dev/mapper/hda5      228M  147M   70M  68% /boot
/dev/mapper/Root-home
                       18G  199M   17G   2% /home
/dev/mapper/Root-var  105G  9.2G   90G  10% /var

Last edited by Joffar; 23rd April 2007 at 04:49.
Reply With Quote
  #7  
Old 24th April 2007, 07:45
edo660 edo660 is offline
Junior Member
 
Join Date: Apr 2007
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by falko
You can install ISPConfig from any directory except /root/ispconfig and /home/admispconfig.
well thats weird because it failed from /root and /tmp but worked from /home/adminispconfig...
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bind Failed christoph2k HOWTO-Related Questions 4 28th April 2007 00:57
Debian 4.0 Etch - No german characters (Umlaute) Cowboy Installation/Configuration 2 23rd April 2007 00:31
Pls Help - Problem installing OpenVZ with Debian Etch. joelee HOWTO-Related Questions 3 14th January 2007 18:37
64-bit Debian 3.1 Install Issue naruto Installation/Configuration 14 5th September 2006 04:12
e-mail problem!!! Debian 3.1 maroonworks Installation/Configuration 18 6th December 2005 14:42


All times are GMT +2. The time now is 13:43.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.