#1  
Old 7th April 2007, 01:30
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default PHP install problem

Hey all. Linux/ISPConfig noob here. I'm installing a Fedora6 web server at home just to play around with and learn. I got the LAMP process down, and now I'm intalling ISPConfig. It gets so far, and then I get this error:

Code:
ERROR: The PHP binary coming with ISPConfig does not work properly on your system!  The installation routine stops here!
I've updated everything including PHP. Any ideas on how to fix this?
Reply With Quote
Sponsored Links
  #2  
Old 7th April 2007, 01:57
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Just noticed this thread:
http://www.howtoforge.com/forums/showthread.php?t=11875
I'm going to try whats suggested there.
Reply With Quote
  #3  
Old 7th April 2007, 04:27
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default

So I tried copying the install_ispconfig to the /tmp directory, and then tried to run /tmp/install_ispconfig]#./setup. Here's the failure output:

Code:
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
[root@server1 install_ispconfig]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       35G  2.9G   31G   9% /
/dev/hda1              99M   16M   78M  17% /boot
tmpfs                 252M     0  252M   0% /dev/shm
Any suggestions?
Reply With Quote
  #4  
Old 7th April 2007, 13:37
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,046
Thanks: 826
Thanked 5,384 Times in 4,231 Posts
Default

There must be a error in the compile output before the error messages that you posted. Please post this error message(s).
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
The Following User Says Thank You to till For This Useful Post:
SgtM (7th April 2007)
  #5  
Old 7th April 2007, 15:05
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Thanks for the reply Till. It's kinda long, but here's the whole output. I hope this is what you want to see.

Code:
General settings
checking whether to include gcov symbols... no
checking whether to include debugging symbols... no
checking layout of installed files... PHP
checking path to configuration file... /root/ispconfig/php
checking where to scan for configuration files... DEFAULT
checking whether to enable safe mode by default... no
checking for safe mode exec dir... /usr/local/php/bin
checking whether to enable PHP's own SIGCHLD handler... no
checking whether to enable magic quotes by default... no
checking whether to enable runpaths... yes
checking whether to explicitly link against libgcc... no
checking whether to enable short tags by default... yes
checking whether to enable dmalloc... no
checking whether to enable IPv6 support... yes
checking how big to make fd sets... using system default
checking whether to enable versioning... no

Configuring extensions
checking whether to enable LIBXML support... no
checking libxml2 install dir... no
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for DSA_get_default_method in -lssl... yes
checking for pkg-config... /usr/bin/pkg-config
checking for OpenSSL version... >= 0.9.6
checking for CRYPTO_free in -lcrypto... yes
checking for SSL_CTX_set_ssl_version in -lssl... yes
checking for PCRE support... yes
checking for ZLIB support... no
checking if the location of ZLIB install directory is defined... no
checking whether to enable bc style precision math functions... no
checking for BZip2 support... no
checking whether to enable calendar conversion support... no
checking whether to enable ctype functions... yes
checking for cURL support... no
checking if we should use cURL for url streams... no
checking size of long... (cached) 4
checking size of int... (cached) 4
checking for int32_t... yes
checking for uint32_t... yes
checking for sys/types.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for string.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for strtoll... yes
checking for atoll... yes
checking for strftime... (cached) yes
checking whether to enable DBA... no
checking for QDBM support... no
checking for GDBM support... no
checking for NDBM support... no
checking for Berkeley DB4 support... no
checking for Berkeley DB3 support... no
checking for Berkeley DB2 support... no
checking for DB1 support... no
checking for DBM support... no
checking for CDB support... no
checking for INI File support... no
checking for FlatFile support... no
checking whether to enable DBA interface... no
checking whether to enable dbase support... no
checking whether to enable DOM support... no
checking whether to enable EXIF (metadata from images) support... no
checking for FrontBase SQL92 (fbsql) support... no
checking for FDF support... no
checking whether to enable input filter support... yes
checking pcre install prefix... no
checking whether to enable FTP support... yes
checking OpenSSL dir for FTP... no
checking for OpenSSL version... >= 0.9.6
checking for CRYPTO_free in -lcrypto... (cached) yes
checking for SSL_CTX_set_ssl_version in -lssl... (cached) yes
checking for GD support... no
checking for the location of libjpeg... no
checking for the location of libpng... no
checking for the location of libXpm... no
checking for FreeType 1.x support... no
checking for FreeType 2... no
checking for T1lib support... no
checking whether to enable truetype string function in GD... no
checking whether to enable JIS-mapped Japanese font support in GD... no
checking for GNU gettext support... no
checking for GNU MP support... no
checking whether to enable hash support... yes
checking whether byte ordering is bigendian... (cached) no
checking size of short... 2
checking size of int... (cached) 4
checking size of long... (cached) 4
checking size of long long... (cached) 8
checking for iconv support... yes
checking for iconv... yes
checking if iconv is glibc's... yes
checking if iconv supports errno... yes
checking if your cpp allows macro usage in include lines... yes
checking for IMAP support... no
checking for IMAP Kerberos support... no
checking for IMAP SSL support... no
checking for InterBase support... no
checking whether to enable JavaScript Object Serialization support... yes
checking for ANSI C header files... (cached) yes
checking for LDAP support... no
checking for LDAP Cyrus SASL support... no
checking whether to enable multibyte string support... yes
checking whether to enable multibyte regex support... yes
checking whether to check multibyte regex backtrack... yes
checking for external libmbfl... no
checking for variable length prototypes and stdarg.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... yes
checking for unistd.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/times.h... yes
checking size of int... (cached) 4
checking size of short... (cached) 2
checking size of long... (cached) 4
checking for working const... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking for working alloca.h... (cached) yes
checking for alloca... (cached) yes
checking for 8-bit clean memcmp... yes
checking for mcrypt support... no
checking for mhash support... no
checking whether to include mime_magic support... no
checking for MING support... no
checking for mSQL support... no
checking for MSSQL support via FreeTDS... no
checking for MySQL support... yes
checking for specified location of the MySQL UNIX socket... no
checking for MySQL UNIX socket location... no
configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
[root@server1 install_ispconfig]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       35G  2.9G   31G   9% /
/dev/hda1              99M   16M   78M  17% /boot
tmpfs                 252M     0  252M   0% /dev/shm
[root@server1 install_ispconfig]# yum install openssh
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
core                      100% |=========================| 1.1 kB    00:00     
extras                    100% |=========================| 1.1 kB    00:00     
updates                   100% |=========================| 1.2 kB    00:00     
Reading repository metadata in from local files
Parsing package install arguments
Nothing to do
[root@server1 install_ispconfig]# yum install openssl
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
Nothing to do
[root@server1 install_ispconfig]# 
[root@server1 install_ispconfig]# tar: aps.tar.gz: Cannot open: No such file or directory
bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error is not recoverable: exiting now
bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Child returned status 2
bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error exit delayed from previous errors
bash: tar:: command not found
[root@server1 install_ispconfig]# ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
bash: ./setup2:: No such file or directory
[root@server1 install_ispconfig]# ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
bash: ERROR:: command not found
Reply With Quote
  #6  
Old 7th April 2007, 15:07
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default

results of df -h:

Code:
[root@server1 install_ispconfig]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       35G  3.0G   31G   9% /
/dev/hda1              99M   16M   78M  17% /boot
tmpfs                 252M     0  252M   0% /dev/shm
[root@server1 install_ispconfig]# cd 
[root@server1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       35G  3.0G   31G   9% /
/dev/hda1              99M   16M   78M  17% /boot
tmpfs                 252M     0  252M   0% /dev/shm
[root@server1 ~]#
Reply With Quote
  #7  
Old 7th April 2007, 17:45
SgtM SgtM is offline
Junior Member
 
Join Date: Apr 2007
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Got it sorted out. The was problem mysql. ISPConfig is now running. Now to start playing around.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Freebsd 6.1 support misterm Installation/Configuration 10 9th April 2009 09:29
Slightly Confused (DNS & Server Help) JohnnyBGoode Installation/Configuration 26 14th August 2007 09:54
Apache2 Freezes celtic Server Operation 31 28th May 2007 17:18
Downgrade php5 to php4.4.2 llizards Installation/Configuration 4 13th March 2006 23:58


All times are GMT +2. The time now is 18:49.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.