View Single Post
  #3  
Old 30th July 2007, 00:24
bpmee bpmee is offline
Member
 
Join Date: Aug 2006
Posts: 86
Thanks: 3
Thanked 7 Times in 6 Posts
Default Not sure.... My vhosts_ispconfig.conf has no entries, but httpd.conf does

Hi Falko,

Thanks for your reply!

You're correct, I do have a lot of vhosts in my configuration.

I check vhosts_ispconfig.conf and noticed no extra entries for cronolog.

The only place I found the cronolog entry was in my httpd.conf file, under Part 3, Vhosts...

Here is part of my http.conf server config section, I dropped some commented sections out:

Code:
User apache
Group apache

### Section 2: 'Main' server configuration
#
#
#
#
ServerAdmin root@localhost

#
#
#ServerName www.example.com:80

#
# ServerName directive.
#

UseCanonicalName Off

#
#
DocumentRoot /var/www/html

#
# Each directory to which Apache has access can be configured with respect
#
<Directory />
    Options Includes Indexes FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory /var/www/html>

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
    Options Includes Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
<IfModule mod_userdir.c>
    #
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    #
    UserDir disable

    #
    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disable" line above, and uncomment
    # the following line instead:
    # 
    #UserDir public_html

</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the 
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.htm index.shtml index.cgi index.php index.php3 index.pl

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
#AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
#   MIMEMagicFile /usr/share/magic.mime
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is 
# used to deliver files (assuming that the OS supports it). 
# The default is on; turn this off if you serve from NFS-mounted 
# filesystems.  Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
#
#EnableSendfile off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common

#
# If you would like to have separate agent and referer logfiles, uncomment
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined
Perhaps VHOSTS is misconfigured, here is my httpd.conf vhosts section:

Code:
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier 
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

<Directory /var/www/sharedip>
    Options +Includes +Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

###############ispconfig_log###############
LogFormat "%v||||%b||||%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined_ispconfig
CustomLog "|/root/ispconfig/cronolog --symlink=/var/log/httpd/ispconfig_access_log /var/log/httpd/ispconfig_access_log_%Y_%m_%d" combined_ispconfig

<Directory /home/www/*/web>
    Options +Includes +Indexes -ExecCGI
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

<Directory /home/www/*/user/*/web>
    Options +Includes -Indexes -ExecCGI
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

<Directory /home/www/*/cgi-bin>
    Options ExecCGI -Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

Include /etc/httpd/conf/vhosts/Vhosts_ispconfig.conf
Does the above indicate a cronolog for EACH vhost, or one cronolog for all as you suggested?

Thanks!
Reply With Quote