View Single Post
  #4  
Old 8th June 2007, 06:19
knowram knowram is offline
Member
 
Join Date: Feb 2007
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Default

okay i got past that part. now I am trying to set up the firewall. at the moment on am only using one interface to connect the linux box to my LAN. I added that interface to the interfaces and gave it the appropriate zone. now when i try to start the fire wall i get this error

Code:
Starting "Shorewall firewall": not done (check /var/log/shorewall-init.log).
and the log file looks like this


Code:
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Clearing Shorewall...Disabling IPV6...
IP Forwarding Enabled
done.
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Starting Shorewall...
Initializing...
Shorewall has detected the following iptables/netfilter capabilities:
   NAT: Available
   Packet Mangling: Available
   Multi-port Match: Available
   Extended Multi-port Match: Available
   Connection Tracking Match: Available
   Packet Type Match: Available
   Policy Match: Available
   Physdev Match: Available
   IP range Match: Available
   Recent Match: Available
   Owner Match: Available
   Ipset Match: Not available
   CONNMARK Target: Not available
   Connmark Match: Available
   Raw Table: Available
   CLASSIFY Target: Available
   FORWARD Mangle Chain: Not available
Determining Zones...
   IPv4 Zones: net loc
   Firewall Zone: fw
Validating interfaces file...
Validating hosts file...
Validating Policy file...
Determining Hosts in Zones...
   net Zone: eth4:0.0.0.0/0 eth0:0.0.0.0/0
   WARNING: Zone loc is empty
Pre-processing Actions...
   Pre-processing /usr/share/shorewall/action.Drop...
   ..Expanding Macro /usr/share/shorewall/macro.Auth...
   ..End Macro
   ..Expanding Macro /usr/share/shorewall/macro.AllowICMPs...
   ..End Macro
   ..Expanding Macro /usr/share/shorewall/macro.SMB...
   ..End Macro
   ..Expanding Macro /usr/share/shorewall/macro.DropUPnP...
   ..End Macro
   ..Expanding Macro /usr/share/shorewall/macro.DropDNSrep...
   ..End Macro
   Pre-processing /usr/share/shorewall/action.Reject...
   Pre-processing /usr/share/shorewall/action.Limit...
Deleting user chains...
Processing /etc/shorewall/routestopped ...
Creating Interface Chains...
Configuring Proxy ARP
Setting up NAT...
Setting up NETMAP...
Adding Common Rules
Adding Anti-smurf Rules
Adding rules for DHCP
Enabling RFC1918 Filtering
Setting up TCP Flags checking...
Setting up Kernel Route Filtering...
   WARNING: Cannot set route filtering on eth0
Setting up Martian Logging...
   WARNING: Cannot set Martian logging on eth0
IP Forwarding Enabled
Setting up IPSEC...
Processing /etc/shorewall/rules...
   Warning -- Rule "ACCEPT net fw all     " is a POLICY
               -- and should be moved to the policy file
   Rule "ACCEPT net fw all     " added.
..Expanding Macro /usr/share/shorewall/macro.DNS...
   Rule "ACCEPT fw net udp 53 - - - -" added.
   Rule "ACCEPT fw net tcp 53 - - - -" added.
..End Macro
..Expanding Macro /usr/share/shorewall/macro.SSH...
   Rule "ACCEPT loc fw tcp 22 - - - -" added.
..End Macro
..Expanding Macro /usr/share/shorewall/macro.Ping...
   Rule "ACCEPT loc fw icmp 8 - - - -" added.
..End Macro
..Expanding Macro /usr/share/shorewall/macro.Ping...
   Rule "REJECT net fw icmp 8 - - - -" added.
..End Macro
   Rule "ACCEPT fw loc icmp     " added.
   Rule "ACCEPT fw net icmp     " added.
Processing Actions...
   Generating Transitive Closure of Used-action List...
Processing /usr/share/shorewall/action.Drop for Chain Drop...
..Expanding Macro /usr/share/shorewall/macro.Auth...
   Rule "REJECT - - tcp 113 -  -" added.
..End Macro
   Rule "dropBcast       " added.
..Expanding Macro /usr/share/shorewall/macro.AllowICMPs...
   Rule "ACCEPT - - icmp fragmentation-needed -  -" added.
   Rule "ACCEPT - - icmp time-exceeded -  -" added.
..End Macro
   Rule "dropInvalid       " added.
..Expanding Macro /usr/share/shorewall/macro.SMB...
   Rule "DROP - - udp 135,445 -  -" added.
   Rule "DROP - - udp 137:139 -  -" added.
   Rule "DROP - - udp 1024: 137  -" added.
   Rule "DROP - - tcp 135,139,445 -  -" added.
..End Macro
..Expanding Macro /usr/share/shorewall/macro.DropUPnP...
   Rule "DROP - - udp 1900 -  -" added.
..End Macro
   Rule "dropNotSyn - - tcp    " added.
..Expanding Macro /usr/share/shorewall/macro.DropDNSrep...
   Rule "DROP - - udp - 53  -" added.
..End Macro
Processing /usr/share/shorewall/action.Reject for Chain Reject...
..Expanding Macro /usr/share/shorewall/macro.Auth...
   Rule "REJECT - - tcp 113 -  -" added.
..End Macro
   Rule "dropBcast       " added.
..Expanding Macro /usr/share/shorewall/macro.AllowICMPs...
   Rule "ACCEPT - - icmp fragmentation-needed -  -" added.
   Rule "ACCEPT - - icmp time-exceeded -  -" added.
..End Macro
   Rule "dropInvalid       " added.
..Expanding Macro /usr/share/shorewall/macro.SMB...
   Rule "REJECT - - udp 135,445 -  -" added.
   Rule "REJECT - - udp 137:139 -  -" added.
   Rule "REJECT - - udp 1024: 137  -" added.
   Rule "REJECT - - tcp 135,139,445 -  -" added.
..End Macro
..Expanding Macro /usr/share/shorewall/macro.DropUPnP...
   Rule "DROP - - udp 1900 -  -" added.
..End Macro
   Rule "dropNotSyn - - tcp    " added.
..Expanding Macro /usr/share/shorewall/macro.DropDNSrep...
   Rule "DROP - - udp - 53  -" added.
..End Macro
Processing /etc/shorewall/policy...
   Policy ACCEPT for fw to net using chain fw2net
   Policy ACCEPT for fw to loc using chain fw2loc
   Policy DROP for net to fw using chain net2fw
   Policy DROP for net to loc using chain net2loc
   Policy ACCEPT for loc to fw using chain loc2fw
   Policy ACCEPT for loc to net using chain loc2net
Masqueraded Networks and Hosts:
   ERROR: Unable to determine the routes through interface "eth1"
Disabling IPV6...
IP Forwarding Enabled
Terminated
Loading /usr/share/shorewall/functions...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Clearing Shorewall...Disabling IPV6...
IP Forwarding Enabled
done.
If I try to access webmin after doing that i can't i have to stop the firewall
Not sure what i am looking for. Or what to do next.

Thanks for the help
Reply With Quote