View Single Post
Old 13th September 2006, 16:29
Ben Ben is offline
Join Date: Jul 2006
Posts: 1,029
Thanks: 7
Thanked 62 Times in 56 Posts

Well I would use this:


* Get / configure / build a set of kernel sources.
* make sure that you are running this kernel, and /lib/modules/`uname -r`/build points to the kernel sources directory
* cd $gnokii_sources/patches/kernel_2.{4,6}
* make
* Become root
* make install
* modprobe nokia_dku2
* dmesg
* Look for the lines as shown above!
* Edit .gnokiirc to include port=/dev/ttyUSB.. and connection=dku2
For the first part I would download the actual kernel image from,
unzip it in e.g. /usr/local/src
cd into the kernel dir
if you already have a kernel config for that kernel tree (eihter 2.4 or 2.6) copy it into that dir
run "make menuconfig" and change things which you need or do not need.
then run the above steps till make (excluding make) and run
"make bzImage modules modules_install"

then follow the rest.

at least do

cp arch/i386/boot/bzImage /boot/kernel-2.X.XX.X
cp /boot/
cp .config /boot/.config-2.X.XX.X

the rest depends now on your bootloader config if it is lilo or grub...
Reply With Quote