Thread: FTP not working
View Single Post
  #1  
Old 9th August 2006, 16:53
mimic mimic is offline
Junior Member
 
Join Date: Aug 2006
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default FTP not working

I have setup ISPConfig on Fedora 5 x64. Everything is working great, and FTP is kinda working but not really.

WebFTP works fine. I can login and view files, etc. However when I try to use and FTP client like CuteFTP to connect, I get an error saying the server did not understand the command.

Code:
STATUS:>  	Getting listing ""...
STATUS:>  	Resolving host name map-depot.com...
STATUS:>  	Host name map-depot.com resolved: ip = 24.86.27.200.
STATUS:>  	Connecting to FTP server map-depot.com:21 (ip = 24.86.27.200)...
STATUS:>  	Socket connected. Waiting for welcome message...
		220 FTP Server ready.
STATUS:>  	Connected. Authenticating...
COMMAND:>	USER web1_admin
		331 Password required for web1_admin.
COMMAND:>	PASS *****
		230 User web1_admin logged in.
STATUS:>  	Login successful.
COMMAND:>	PWD
		257 "/" is current directory.
STATUS:>  	Home directory: /
COMMAND:>	FEAT
		211-Features:
		 MDTM
		 REST STREAM
		 SIZE
		211 End
STATUS:>  	This site supports features.
STATUS:>  	This site supports SIZE.
STATUS:>  	This site can resume broken downloads.
COMMAND:>	REST 0
		350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
COMMAND:>	PASV
		227 Entering Passive Mode (192,168,1,4,204,112).
COMMAND:>	LIST
STATUS:>  	Substituting received PASV address 192.168.1.4 to server address 24.86.27.200.
STATUS:>  	Connecting FTP data socket 24.86.27.200:52336...
ERROR:>   	The connection failed due to an error or timeout.
		1) Verify that the destination IP address is correct.
		2) Increase the connection timeout threshold under Global Settings | Connection.
		3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
		4) Verify that the problem is not local by trying to connect to an alternate server.
		5) If a server name was used, verify it resolves to the correct address.
		6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
		7) Try pinging the address.
		8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
		9) Do a traceroute to the destination to verify all routers along the connection path are operational.
		10) Verify that your subnet mask is setup properly.
		11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
		12) Verify that your anti-virus software is not at fault (try disabling it).
ERROR:>   	PASV failed, trying PORT.
STATUS:>  	Waiting 0 seconds...
STATUS:>  	Getting listing "/"...
STATUS:>  	Resolving host name map-depot.com...
STATUS:>  	Host name map-depot.com resolved: ip = 24.86.27.200.
STATUS:>  	Connecting to FTP server map-depot.com:21 (ip = 24.86.27.200)...
STATUS:>  	Socket connected. Waiting for welcome message...
		220 FTP Server ready.
STATUS:>  	Connected. Authenticating...
COMMAND:>	USER web1_admin
		331 Password required for web1_admin.
COMMAND:>	PASS *****
		230 User web1_admin logged in.
STATUS:>  	Login successful.
COMMAND:>	PWD
		257 "/" is current directory.
STATUS:>  	Home directory: /
STATUS:>  	This site supports features.
STATUS:>  	This site supports SIZE.
STATUS:>  	This site can resume broken downloads.
COMMAND:>	REST 0
		350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
COMMAND:>	PORT 192,168,1,2,9,224
		500 Illegal PORT command
ERROR:>   	Syntax error, command unrecognized.
ERROR:>   	Failed to establish data socket.
Any help would be appreciated.
Reply With Quote
Sponsored Links