View Single Post
  #1  
Old 8th June 2012, 18:39
MikeFF MikeFF is offline
Junior Member
 
Join Date: Jun 2012
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Question Problem with Network configuration on UBUNTU Server 12.04 LTS

Hello.

I hope i can find some help about this issue.

Recently I installed my servfer with ubuntu server 12.04 LTS, just console mode, no desktop.

after I end the installation, i wanted to configure multiple sites ins this server, (just I have it on debian 5) for each site one IP.

I did the configuration on /etc/network/interfaces (as ussual), but I put a virtual network, and when I reboot my PC, in the boot comes a message:
"Waiting for server network configuration..."

After a while, comes a new message:

"Waiting up to 60 more seconds for network configuration..."

and it takes about 3 more minutes to boot, after a time, it comes a new message:

"Booting system without full network configuration..."

This is my /etc/netwrok/interfaces file as end of the installation.

Quote:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface

auto eth0

iface eth0 inet static
address 192.168.50.2
netmask 255.255.255.0
network 192.168.50.0
broadcast 192.168.50.255
gateway 192.168.50.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.50.2
dns-search mtm.net
Whit that configuration I don't have any problems, everything goes well.

But when I change to this.

Quote:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface

auto eth0

iface eth0 inet static
address 192.168.50.2
netmask 255.255.255.0
network 192.168.50.0
broadcast 192.168.50.255
gateway 192.168.50.1
# dns-* options are implemented by the resolvconf package, if installed
#dns-nameservers 192.168.50.2
#dns-search mtm.net

auto eth0:0

iface eth0:0 inet static
address 192.168.50.3
netmask 255.255.255.0
network 192.168.50.0
broadcast 192.168.50.255
gateway 192.168.50.1

auto eth0:1

iface eth0:1 inet static
address 192.168.50.10
netmask 255.255.255.0
network 192.168.50.0
broadcast 192.168.50.255
gateway 192.168.50.1
There is the problem, i have more time to boot.

And one more thing, this server is behind a router, so to to updates, or new installation, I need to add a new nameserver.

I mean, I need to DNS address, one the server it self, and then the primary router to connect to internet.

Could somebody help me with this

Thanks in advance.
Reply With Quote
Sponsored Links