View Single Post
  #1  
Old 24th April 2012, 21:06
dghvoip dghvoip is offline
Junior Member
 
Join Date: Apr 2012
Posts: 7
Thanks: 2
Thanked 1 Time in 1 Post
Default ISPConfig 3 + Mailman + multiple servers

Hi ISPC community,

I managed to install ISPC using the multi server howto on Squeeze as follows, tweaking the installer_base.inc.php file.

1 DB Server
1 MX Server
1 ISPC+Web+FTP Server
1 DNS Server

I installed mailman and related stuff, I changed mm_cfg.py

Code:
# cat /etc/mailman/mm_cfg.py
# -*- python -*-

# Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 USA


"""This is the module which takes your site-specific settings.

From a raw distribution it should be copied to mm_cfg.py.  If you
already have an mm_cfg.py, be careful to add in only the new settings
you want.  The complete set of distributed defaults, with annotation,
are in ./Defaults.  In mm_cfg, override only those you want to
change, after the

  from Defaults import *

line (see below).

Note that these are just default settings - many can be overridden via the
admin and user interfaces on a per-list or per-user basis.

Note also that some of the settings are resolved against the active list
setting by using the value as a format string against the
list-instance-object's dictionary - see the distributed value of
DEFAULT_MSG_FOOTER for an example."""


#######################################################
#    Here's where we get the distributed defaults.    #

from Defaults import *

##############################################################
# Put YOUR site-specific configuration below, in mm_cfg.py . #
# See Defaults.py for explanations of the values.            #

#-------------------------------------------------------------
# The name of the list Mailman uses to send password reminders
# and similar. Don't change if you want mailman-owner to be
# a valid local part.
MAILMAN_SITE_LIST = 'mailman'

#-------------------------------------------------------------
# If you change these, you have to configure your http server
# accordingly (Alias and ScriptAlias directives in most httpds)
DEFAULT_URL_PATTERN = 'http://%s:64000/cgi-bin/mailman/'
PRIVATE_ARCHIVE_URL = '/cgi-bin/mailman/private'
IMAGE_LOGOS         = '/images/mailman/'

#-------------------------------------------------------------
# Default domain for email addresses of newly created MLs
DEFAULT_EMAIL_HOST = 'mydomain.com'
#-------------------------------------------------------------
# Default host for web interface of newly created MLs
DEFAULT_URL_HOST   = 'mydomain.com'
#-------------------------------------------------------------
# Required when setting any of its arguments.
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)

#-------------------------------------------------------------
# The default language for this server.
DEFAULT_SERVER_LANGUAGE = 'en'

#-------------------------------------------------------------
# Iirc this was used in pre 2.1, leave it for now
USE_ENVELOPE_SENDER    = 0              # Still used?

#-------------------------------------------------------------
# Unset send_reminders on newly created lists
DEFAULT_SEND_REMINDERS = 0

#-------------------------------------------------------------
# Uncomment this if you configured your MTA such that it
# automatically recognizes newly created lists.
# (see /usr/share/doc/mailman/README.Exim4.Debian or
# /usr/share/mailman/postfix-to-mailman.py)
# MTA=None   # Misnomer, suppresses alias output on newlist

#-------------------------------------------------------------
# Uncomment if you use Postfix virtual domains (but not
# postfix-to-mailman.py), but be sure to see
# /usr/share/doc/mailman/README.Debian first.
MTA='Postfix'
POSTFIX_STYLE_VIRTUAL_DOMAINS = ['dom1.com', 'dom2.com']
#-------------------------------------------------------------
# Uncomment if you want to filter mail with SpamAssassin. For
# more information please visit this website:
# http://www.jamesh.id.au/articles/mailman-spamassassin/
# GLOBAL_PIPELINE.insert(1, 'SpamAssassin')

# Note - if you're looking for something that is imported from mm_cfg, but you
# didn't find it above, it's probably in /usr/lib/mailman/Mailman/Defaults.py.
 root@ispmx1: ~
As you see I changed the DEFAULT_URL_PATTERN = 'http://%s/cgi-bin/mailman/' into DEFAULT_URL_PATTERN = 'http://%s:64000/cgi-bin/mailman/' as the MX server is running on another machine as the web server serving the mailing lists, but I have a problem when a mailing list is created on ISPC GUI; first mm_cfg.py is changed back to some defaults I haven't figured out where are they taken from, and when I receive the "Your list has been created" email it contains the DEFAULT_URL_PATTERN = 'http://%s/cgi-bin/mailman/' without the :64000 port I created.

I've tweaked the Defaults.py at /var/lib/mailman/data dir and the mm_cfg.py there to reflect my custom setting but they're all changed back to defaults.

I _need_ the confirmation email to arrive with the DEFAULT_URL_PATTERN = 'http://%s:64000/cgi-bin/mailman/'

How do I force ISPC to use my settings and not the defaults?.

Thanks and ISPC rocks.
Reply With Quote
Sponsored Links