View Single Post
  #1  
Old 8th June 2010, 16:46
jariasca jariasca is offline
Member
 
Join Date: Jan 2010
Posts: 42
Thanks: 2
Thanked 8 Times in 4 Posts
Default Centos 5.x Traffic Shape on multiple interfaces

Hi All,

I'm trying to limit the bandwitdh to one of my centos servers, using a traffic shaping script.

Is working on the eth1 I have a limit of 60mbps, but now I have 2 more interfaces and I need to limit them eth1 to 15mbps and the eth2 45mbps

The script that I'm using only support one eth.

Code:
#!/bin/bash
#
#  tc uses the following units when passed as a parameter.
#  kbps: Kilobytes per second 
#  mbps: Megabytes per second
#  kbit: Kilobits per second
#  mbit: Megabits per second
#  bps: Bytes per second 
#       Amounts of data can be specified in:
#       kb or k: Kilobytes
#       mb or m: Megabytes
#       mbit: Megabits
#       kbit: Kilobits
#  To get the byte figure from bits, divide the number by 8 bit
#

#
# Name of the traffic control command.
TC=/sbin/tc

# The network interface we're planning on limiting bandwidth.
IF=eth0             # Interface

# Download limit (in mega bits)
DNLD=60mbit          # DOWNLOAD Limit

# Upload limit (in mega bits)
UPLD=60mbit          # UPLOAD Limit

# IP address of the machine we are controlling
IP=xxx.xxx.xxx.xxx  # Host IP

# Filter options for limiting the intended interface.
U32="$TC filter add dev $IF protocol ip parent 1:0 prio 1 u32"

start() {

# We'll use Hierarchical Token Bucket (HTB) to shape bandwidth.
# For detailed configuration options, please consult Linux man
# page.

    $TC qdisc add dev $IF root handle 1: htb default 30
    $TC class add dev $IF parent 1: classid 1:1 htb rate $DNLD
    $TC class add dev $IF parent 1: classid 1:2 htb rate $UPLD
    $U32 match ip dst $IP/32 flowid 1:1
    $U32 match ip src $IP/32 flowid 1:2

# The first line creates the root qdisc, and the next two lines
# create two child qdisc that are to be used to shape download 
# and upload bandwidth.
#
# The 4th and 5th line creates the filter to match the interface.
# The 'dst' IP address is used to limit download speed, and the 
# 'src' IP address is used to limit upload speed.

}

stop() {

# Stop the bandwidth shaping.
    $TC qdisc del dev $IF root

}

restart() {

# Self-explanatory.
    stop
    sleep 1
    start

}

show() {

# Display status of traffic control status.
    $TC -s qdisc ls dev $IF

}

case "$1" in

  start)

    echo -n "Starting bandwidth shaping: "
    start
    echo "done"
    ;;

  stop)

    echo -n "Stopping bandwidth shaping: "
    stop
    echo "done"
    ;;

  restart)

    echo -n "Restarting bandwidth shaping: "
    restart
    echo "done"
    ;;

  show)

    echo "Bandwidth shaping status for $IF:"
    show
    echo ""
    ;;

  *)

    pwd=$(pwd)
    echo "Usage: tc.bash {start|stop|restart|show}"
    ;;

esac

exit 0
Please advise
Thanks
-Jorge
Reply With Quote
Sponsored Links