View Single Post
  #3  
Old 23rd January 2010, 12:22
farbrorc farbrorc is offline
Junior Member
 
Join Date: Jan 2010
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here are parts from my mail log:

Jan 23 10:30:02 franke postfix/smtp[27365]: D4719422CD: to=<wwwrun@server1.pappac.se>, relay=none, delay=226488, delays=226428/0.02/60/0, dsn=4.4.1, status=deferred (connect to server1.pappac.se[194.9.94.85]:25: Connection timed out)
Jan 23 10:30:02 franke postfix/smtp[27370]: B36AA422D6: to=<wwwrun@server1.pappac.se>, relay=none, delay=212838, delays=212778/0.03/60/0, dsn=4.4.1, status=deferred (connect to server1.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:02 franke postfix/smtp[27375]: 057F54225D: to=<web7_mattias@franke.pappac.se>, orig_to=<mattias@web6.com>, relay=none, delay=129623, delays=129563/0.06/60/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:02 franke postfix/smtp[27371]: 849204225A: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=132796, delays=132736/0.04/60/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.85]:25: Connection timed out)
Jan 23 10:30:02 franke postfix/smtp[27373]: 005F3422E0: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=127703, delays=127643/0.05/60/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:02 franke postfix/smtp[27377]: connect to server1.pappac.se[194.9.94.86]:25: Connection timed out
Jan 23 10:30:02 franke postfix/smtp[27380]: connect to franke.pappac.se[194.9.94.85]:25: Connection timed out
Jan 23 10:30:02 franke postfix/smtp[27376]: connect to franke.pappac.se[194.9.94.86]:25: Connection timed out
Jan 23 10:30:02 franke postfix/smtp[27378]: connect to server1.pappac.se[194.9.94.85]:25: Connection timed out
Jan 23 10:30:02 franke postfix/smtp[27379]: connect to server1.pappac.se[194.9.94.86]:25: Connection timed out
Jan 23 10:30:02 franke postfix/error[27450]: E7198422E5: to=<wwwrun@franke.pappac.se>, relay=none, delay=72336, delays=72276/60/0/0.01, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27379]: 69A48422D0: to=<wwwrun@server1.pappac.se>, relay=none, delay=224266, delays=224205/0.08/60/0, dsn=4.4.1, status=deferred (connect to server1.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/error[27451]: 53B66422DD: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=128124, delays=128064/60/0/0.04, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27378]: 78974422D3: to=<wwwrun@server1.pappac.se>, relay=none, delay=215259, delays=215199/0.07/60/0, dsn=4.4.1, status=deferred (connect to server1.pappac.se[194.9.94.85]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27376]: A6B8E422E4: to=<wwwrun@franke.pappac.se>, relay=none, delay=73560, delays=73500/0.06/60/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27377]: A4AB0422D5: to=<wwwrun@server1.pappac.se>, relay=none, delay=215088, delays=215028/0.07/60/0, dsn=4.4.1, status=deferred (connect to server1.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27380]: 23A8E422E6: to=<wwwrun@franke.pappac.se>, relay=none, delay=71992, delays=71932/0.08/60/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.85]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/error[27452]: 9085D422DF: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=128003, delays=127943/60/0/0.05, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to franke.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/error[27450]: 93CD0422CF: to=<wwwrun@server1.pappac.se>, relay=none, delay=224268, delays=224208/60/0/0.02, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to server1.pappac.se[194.9.94.86]:25: Connection timed out)
Jan 23 10:30:03 franke postfix/smtp[27366]: connect to alt1.gmail-smtp-in.l.google.com[72.14.221.27]:25: Connection timed out
Jan 23 10:30:03 franke postfix/smtp[27383]: connect to alt1.gmail-smtp-in.l.google.com[72.14.221.27]:25: Connection timed out
Jan 23 10:30:03 franke postfix/smtp[27388]: connect to alt1.gmail-smtp-in.l.google.com[72.14.221.27]:25: Connection timed out
Jan 23 10:30:03 franke postfix/smtp[27391]: connect to mail.telia.com[81.228.11.100]:25: Connection timed out
Jan 23 10:30:03 franke postfix/smtp[27392]: connect to mx-cluster2.one.com[91.198.169.11]:25: Connection timed out
Jan 23 10:30:03 franke postfix/smtp[27392]: 4DF37422E2: to=<lena@mejla.eu>, relay=none, delay=78261, delays=78201/0.13/60/0, dsn=4.4.1, status=deferred (connect to mx-cluster2.one.com[91.198.169.11]:25: Connection timed out)
Jan 23 10:31:03 franke postfix/smtp[27388]: connect to alt3.gmail-smtp-in.l.google.com[209.85.217.5]:25: Connection timed out
Jan 23 10:31:03 franke postfix/smtp[27391]: connect to mail.telia.com[81.228.8.85]:25: Connection timed out
Jan 23 10:31:03 franke postfix/smtp[27381]: connect to mx2.hotmail.com[65.54.188.110]:25: Connection timed out
Jan 23 10:31:06 franke postfix/smtp[27381]: connect to mx2.hotmail.com[65.55.37.72]:25: No route to host
Jan 23 10:31:06 franke postfix/smtp[27381]: E7A59422D2: to=<gerdkling@hotmail.com>, relay=none, delay=219777, delays=219654/0.09/123/0, dsn=4.4.1, status=deferred (connect to mx2.hotmail.com[65.55.37.72]:25: No route to host)
Jan 23 10:31:12 franke postfix/smtp[27366]: connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: No route to host
Jan 23 10:31:12 franke postfix/smtp[27366]: D0F8B4225E: to=<cederlundmattias@gmail.com>, relay=none, delay=132520, delays=132391/0.01/129/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: No route to host)
Jan 23 10:31:33 franke postfix/smtp[27374]: connect to mail.telia.com[81.228.8.165]:25: Connection timed out
Jan 23 10:31:33 franke postfix/smtp[27372]: connect to mail.telia.com[81.228.8.84]:25: Connection timed out
Jan 23 10:31:33 franke postfix/smtp[27374]: 014D7422CC: to=<hans.m.eriksson@telia.com>, relay=none, delay=231356, delays=231206/0.05/150/0, dsn=4.4.1, status=deferred (connect to mail.telia.com[81.228.8.165]:25: Connection timed out)
Jan 23 10:31:33 franke postfix/smtp[27372]: 01455422D4: to=<hans.m.eriksson@telia.com>, relay=none, delay=219804, delays=219654/0.04/150/0, dsn=4.4.1, status=deferred (connect to mail.telia.com[81.228.8.84]:25: Connection timed out)
Jan 23 10:31:33 franke postfix/smtp[27383]: connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: Connection timed out
Jan 23 10:31:33 franke postfix/smtp[27388]: connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: Connection timed out
Jan 23 10:31:33 franke postfix/smtp[27391]: connect to mail.telia.com[81.228.8.165]:25: Connection timed out
Jan 23 10:31:33 franke postfix/smtp[27383]: E8F98422CE: to=<jblidsater@gmail.com>, relay=none, delay=231356, delays=231206/0.1/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: Connection timed out)
Jan 23 10:31:33 franke postfix/smtp[27391]: 58249422E3: to=<hans.m.eriksson@telia.com>, relay=none, delay=78351, delays=78200/0.12/150/0, dsn=4.4.1, status=deferred (connect to mail.telia.com[81.228.8.165]:25: Connection timed out)
Jan 23 10:31:33 franke postfix/smtp[27388]: 59E6C4225F: to=<cederlundmattias@gmail.com>, relay=none, delay=131899, delays=131748/0.11/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.93.114]:25: Connection timed out)
Jan 23 11:08:51 franke postfix/smtpd[28037]: connect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:08:52 franke postfix/smtpd[28037]: warning: support for restriction "check_relay_domains" will be removed from Postfix; use "reject_unauth_destination" instead
Jan 23 11:08:52 franke postfix/smtpd[28037]: NOQUEUE: reject: RCPT from h-206-162.A165.corp.bahnhof.se[81.170.206.162]: 554 5.7.1 <mattias@sjungisollentuna.se>: Recipient address rejected: Relay access denied; from=<mattias@mono.se> to=<mattias@sjungisollentuna.se> proto=ESMTP helo=<mono.se>
Jan 23 11:08:52 franke postfix/smtpd[28037]: disconnect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:09:24 franke postfix/smtpd[28037]: connect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:09:24 franke postfix/smtpd[28037]: EAFFD422E7: client=h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:09:24 franke postfix/cleanup[28056]: EAFFD422E7: message-id=<9FB84D133D23B14897FD4A8BEB1DCFB05F7E38@master. mono.local>
Jan 23 11:09:24 franke postfix/qmgr[15684]: EAFFD422E7: from=<mattias@mono.se>, size=1536, nrcpt=1 (queue active)
Jan 23 11:09:24 franke postfix/smtpd[28037]: disconnect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:09:25 franke postfix/smtp[28057]: connect to franke.pappac.se[194.9.94.85]:25: No route to host
Jan 23 11:09:34 franke postfix/smtp[28057]: connect to franke.pappac.se[194.9.94.86]:25: No route to host
Jan 23 11:09:34 franke postfix/smtp[28057]: EAFFD422E7: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=9.1, delays=0.04/0.01/9.1/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.86]:25: No route to host)
Jan 23 11:10:23 franke postfix/smtpd[28037]: connect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:10:23 franke postfix/smtpd[28037]: BC683422E8: client=h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:10:23 franke postfix/cleanup[28056]: BC683422E8: message-id=<9FB84D133D23B14897FD4A8BEB1DCFB05F7E39@master. mono.local>
Jan 23 11:10:23 franke postfix/qmgr[15684]: BC683422E8: from=<mattias@mono.se>, size=1416, nrcpt=1 (queue active)
Jan 23 11:10:23 franke postfix/smtpd[28037]: disconnect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:10:26 franke postfix/smtp[28057]: connect to franke.pappac.se[194.9.94.85]:25: No route to host
Jan 23 11:10:29 franke postfix/smtpd[28037]: connect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:10:29 franke postfix/smtpd[28037]: NOQUEUE: reject: RCPT from h-206-162.A165.corp.bahnhof.se[81.170.206.162]: 554 5.7.1 <mattias@sjungisollentuna.se>: Recipient address rejected: Relay access denied; from=<mattias@mono.se> to=<mattias@sjungisollentuna.se> proto=ESMTP helo=<mono.se>
Jan 23 11:10:29 franke postfix/smtpd[28037]: disconnect from h-206-162.A165.corp.bahnhof.se[81.170.206.162]
Jan 23 11:10:35 franke postfix/smtp[28057]: connect to franke.pappac.se[194.9.94.86]:25: No route to host
Jan 23 11:10:35 franke postfix/smtp[28057]: BC683422E8: to=<web14_mattias@franke.pappac.se>, orig_to=<mattias@adlevo.se>, relay=none, delay=12, delays=0.01/0/12/0, dsn=4.4.1, status=deferred (connect to franke.pappac.se[194.9.94.86]:25: No route to host)


And here are my main.cf:

.....
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The #mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
##mydestination = $myhostname, localhost.$mydomain, localhost
##mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
##mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $#mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $#mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $#virtual_alias_maps files.
# For example, you define $#mydestination domain recipients in
# the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $#mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $#mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $#mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
relay_domains = $mydestination, hash:/etc/postfix/relay

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$#mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5



# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/share/doc/packages/postfix-doc/html

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/packages/postfix-doc/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES


################################################## ##########
# Start MySQL from postfixwiki.org
################################################## ##########
#virtual_alias_maps = hash:/etc/postfix/virtual
#virtual_uid_maps = static:303
#virtual_gid_maps = static:303
#virtual_minimum_uid = 303
#virtual_mailbox_base = /srv/maildirs
#virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domains_maps.cf
#virtual_mailbox_limit = 0
#virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf
#virtual_transport = virtual
## Additional for quota support
#virtual_create_maildirsize = yes
#virtual_mailbox_extended = yes
#virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf
#virtual_mailbox_limit_override = yes
#virtual_maildir_limit_message = Sorry, the user's maildir has overdrawn his diskspace quota, please try again later.
#virtual_overquota_bounce = yes
relay_domains = $mydestination, hash:/etc/postfix/relay
################################################## ##########
# End MySQL from postfixwiki.org
################################################## ##########

inet_protocols = all
biff = no
mail_spool_directory = /var/mail
canonical_maps = hash:/etc/postfix/canonical
virtual_alias_domains = hash:/etc/postfix/virtual
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
myhostname = franke.$mydomain
delay_warning_time = 1h
message_strip_characters = \0
program_directory = /usr/lib/postfix
inet_interfaces = all
masquerade_domains =
#mydestination = $myhostname, localhost.$mydomain
defer_transports =
mynetworks_style = subnet
disable_dns_lookups = no
relayhost =
content_filter =
mailbox_command =
mailbox_transport =
strict_8bitmime = no
disable_mime_output_conversion = no
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
strict_rfc821_envelopes = no
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_ relay_domains
smtp_sasl_auth_enable = no
smtpd_sasl_auth_enable = yes
smtpd_use_tls = yes
smtp_use_tls = yes
alias_maps = hash:/etc/aliases
mailbox_size_limit = 0
message_size_limit = 0
mydomain = pappac.se
mynetworks = 127.0.0.0/8
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_authenticated_header = yes
smtpd_tls_auth_only = no
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

virtual_maps = hash:/etc/postfix/virtusertable


Thanks so much for all help!
Mattias

Last edited by farbrorc; 23rd January 2010 at 14:22.
Reply With Quote