Thread: Courier POP3
View Single Post
  #1  
Old 14th November 2009, 21:19
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default Courier POP3

Hello guys, I installed ISPconfig more times before, but this time, after i was done with it, pop3 (receiving email) wasnt working, i have no clue where should be the problem.

Here is file /etc/courier/pop3d
Code:
##VERSION: $Id: pop3d.dist.in,v 1.16 2005/07/05 12:42:51 mrsam Exp $
#
# pop3d created from pop3d.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2004 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  Courier POP3 daemon configuration
#
##NAME: PIDFILE:0
#

PIDFILE=/var/run/courier/pop3d.pid

##NAME: MAXDAEMONS:0
#
#  Maximum number of POP3 servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:4
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=4

##NAME: POP3AUTH:1
#
# To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH
# variable:
#
# POP3AUTH="LOGIN"
#
# If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH
# to something like this:
#
# POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1"

POP3AUTH=""

##NAME: POP3AUTH_ORIG:1
#
# For use by webadmin

POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256"

##NAME: POP3AUTH_TLS:1
#
# To also advertise SASL PLAIN if SSL is enabled, uncomment the
# POP3AUTH_TLS environment variable:
#
# POP3AUTH_TLS="LOGIN PLAIN"

POP3AUTH_TLS=""

##NAME: POP3AUTH_TLS_ORIG:0
#
# For use by webadmin

POP3AUTH_TLS_ORIG="LOGIN PLAIN"

##NAME: POP3_PROXY:0
#
# Enable proxying.  See README.proxy

POP3_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.

# PROXY_HOSTNAME=

##NAME: PORT:1
#
# Port to listen on for connections.  The default is port 110.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possibly to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The ADDRESS setting is a default for ports that do not have a specified
#  IP address.

PORT=110

##NAME: ADDRESS:0
#
# IP address to listen on.  0 means all IP addresses.

ADDRESS=0

##NAME: TCPDOPTS:0
#
# Other couriertcpd(1) options.  The following defaults should be fine.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.
#

LOGGEROPTS="-name=pop3d"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: POP3DSTART:0
#
# POP3DSTART is not referenced anywhere in the standard Courier programs
# or scripts.  Rather, this is a convenient flag to be read by your system
# startup script in /etc/rc.d, like this:
#
#  . /etc/courier/pop3d
#  case x$POP3DSTART in
#  x[yY]*)
#        /usr/lib/courier/pop3d.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, until Courier is shipped by default
# with enough platforms so that people get annoyed with having to flip it to
# YES every time.

POP3DSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir
/var/log/mail.log
Code:
Nov 14 21:11:26 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:11:26 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3909], protocol=IMAP
Nov 14 21:11:26 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:11:27 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:11:27 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3911], protocol=IMAP
Nov 14 21:11:27 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:12:59 primary postfix/qmgr[1853]: D9B30183E4: from=<tw@ffs.sk>, size=2094, nrcpt=1 (queue active)
Nov 14 21:12:59 primary postfix/qmgr[1853]: 7FC70183E6: from=<adamlucansky@azet.sk>, size=1942, nrcpt=1 (queue active)
Nov 14 21:12:59 primary postfix/qmgr[1853]: 8731A183E5: from=<adam@crew.sk>, size=1804, nrcpt=1 (queue active)
Nov 14 21:12:59 primary maildrop[12031]: Unable to open mailbox.
Nov 14 21:12:59 primary maildrop[12036]: Unable to open mailbox.
Nov 14 21:12:59 primary postfix/pipe[12030]: D9B30183E4: to=<wagner@crew.sk>, relay=maildrop, delay=923, delays=922/0.01/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:12:59 primary postfix/pipe[12033]: 7FC70183E6: to=<adam@crew.sk>, relay=maildrop, delay=541, delays=541/0.04/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:12:59 primary maildrop[12048]: Unable to open mailbox.
Nov 14 21:12:59 primary postfix/pipe[12030]: 8731A183E5: to=<adam@crew.sk>, relay=maildrop, delay=580, delays=580/0.23/0/0.05, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:13:43 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:43 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3920], protocol=IMAP
Nov 14 21:13:43 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:13:44 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:44 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3921], protocol=IMAP
Nov 14 21:13:45 primary imapd: LOGOUT, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=96, sent=500, time=1
Nov 14 21:13:47 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:47 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3922], protocol=IMAP
Nov 14 21:13:47 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:13:48 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:48 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3923], protocol=IMAP
Nov 14 21:13:48 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max connection rate 1/60s for (smtp:213.215.107.141) at Nov 14 21:11:00
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max connection count 1 for (smtp:213.215.107.141) at Nov 14 21:11:00
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max cache size 2 at Nov 14 21:11:13
Nov 14 21:15:01 primary pop3d: Connection, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary pop3d: Disconnected, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary imapd: Connection, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary imapd: Disconnected, ip=[::ffff:127.0.0.1], time=0
Nov 14 21:15:01 primary postfix/smtpd[12092]: connect from localhost[127.0.0.1]
Nov 14 21:15:01 primary postfix/smtpd[12092]: lost connection after CONNECT from localhost[127.0.0.1]
Nov 14 21:15:01 primary postfix/smtpd[12092]: disconnect from localhost[127.0.0.1]
Nov 14 21:16:01 primary postfix/smtpd[11950]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Nov 14 21:16:01 primary postfix/smtpd[11950]: disconnect from localhost[127.0.0.1]
Nov 14 21:16:14 primary postfix/smtpd[11979]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Nov 14 21:16:14 primary postfix/smtpd[11979]: disconnect from localhost[127.0.0.1]
Nov 14 21:17:59 primary postfix/qmgr[1853]: 6D1D1183E7: from=<adamlucansky@azet.sk>, size=1950, nrcpt=1 (queue active)
Nov 14 21:17:59 primary postfix/qmgr[1853]: 270AF183E8: from=<adam@crew.sk>, size=1804, nrcpt=1 (queue active)
Nov 14 21:17:59 primary postfix/qmgr[1853]: 9070A183DE: from=<info@forum-warez.info>, size=2941, nrcpt=1 (queue active)
Nov 14 21:17:59 primary maildrop[12139]: Unable to open mailbox.
Nov 14 21:17:59 primary maildrop[12141]: Unable to open mailbox.
Nov 14 21:17:59 primary postfix/pipe[12138]: 6D1D1183E7: to=<adam@crew.sk>, relay=maildrop, delay=418, delays=418/0.03/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:17:59 primary postfix/pipe[12140]: 9070A183DE: to=<exidus@crew.sk>, relay=maildrop, delay=8980, delays=8980/0.02/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:17:59 primary maildrop[12154]: Unable to open mailbox.
Nov 14 21:17:59 primary postfix/pipe[12138]: 270AF183E8: to=<adam@crew.sk>, relay=maildrop, delay=406, delays=405/0.21/0/0.06, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
In mail-client, it says like fine, but when i send email from ouside to mailbox, email just disappear. Any ideas please ? Its urgent
Reply With Quote
Sponsored Links