View Single Post
  #1  
Old 1st October 2008, 17:22
shaiss shaiss is offline
Junior Member
 
Join Date: Oct 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Question Help Setting up openLDAP/Samba on Ubuntu 8.04

Hi Everyone,
Thank you for having a site and forum where us less experienced users can get help.

I'm setting up a linux based server for a local company and have ran into some snags. I havn't had much server experience and this is my first linux server setup.

This is the current configuration for the Ubuntu Server:
Webmin, OpenLDAP, Samba, BIND DNS are installed and configured as per the tutorial here: http://www.howtoforge.com/openldap-s...ler-ubuntu7.10
IP: 192.168.1.116
Gateway: 192.168.1.1
Runing "hostname -f" returns "dcon"
Runing "hostname -a" returns "dcon.csts.local"
Ping dcon from a winXP machine comes back ok
ping 192.168.1.116 from a winXP machine comes back ok
pinging "CSTS" or "CSTS.local" returns unable to find host

I've gone through the entire tutorial and done everything as instructed, including setting up Apache2 and phpLDAPadmin.

Here are the snags I get:
Step 6 says to run "net getlocalsid". When I run that, this is what I get:
Code:
root@dcon:~# net getlocalsid
[2008/10/01 07:55:34, 0] lib/smbldap.c:smbldap_connect_system(982)
  failed to bind to server ldap://localhost/ with dn="cn=admin,dc=example,dc=local" Error: Invalid credentials
  	(unknown)
SID for domain DCON is: S-1-5-21-833193327-3149878873-3717933898
When I get to step 14 on the windows machine everything goes to plan till you login. I attempt to join the CSTS domain, click ok, the username and password dialog box comes up, I try any of the LDAP/Unix users and the same restult happens. After putting in the login details and clicking ok, I get an error dialog box saying "The network path was not found."

So I'm not sure what's wrong in my setup. I've put up some of the config files incase that helps.

Unix/LDAP users and passwords
root safety1
shai safety1
ricky 12345

/etc/hosts:
Code:
127.0.0.1       localhost
127.0.1.1       dcon dcon.csts.local

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
/etc/ldap/slapd.conf:
http://pastie.org/282871

/etc/samba/smb.conf
http://pastie.org/282875

/etc/smbldap-tools/smbldap.conf
http://pastie.org/282878

/etc/smbldap-tools/smbldap_bind.conf
Code:
############################
# Credential Configuration #
############################
# Notes: you can specify two differents configuration if you use a
# master ldap for writing access and a slave ldap server for reading access
# By default, we will use the same DN (so it will work for standard Samba
# release)
slaveDN="cn=admin,dc=CSTS,dc=local"
slavePw="safety1"
masterDN="cn=admin,dc=CSTS,dc=local"
masterPw="safety1"
/etc/ldap.conf
http://pastie.org/282883

/etc/resolv.conf
Code:
### BEGIN INFO
#
# Modified_by:  NetworkManager
# Process:      /usr/bin/NetworkManager
# Process_id:   4901
#
### END INFO



nameserver 208.67.222.222
nameserver 208.67.220.220
search CSTS.local
nameserver 192.168.1.216
Hopefully that's all the conf files needed. If I missed anything please let me know. I've spent the last couple of day's trying to get this to work and this is the farthest I've gotten.

Thank you everyone for your help,
Shai

Last edited by shaiss; 1st October 2008 at 17:25.
Reply With Quote
Sponsored Links