View Single Post
  #16  
Old 24th February 2008, 23:03
malinens malinens is offline
Member
 
Join Date: Jan 2008
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have vsftpd again now
I have this problem with chmod- when I upload files and folders, chmod for all uploaded folders are 770 and for all uploaded files 660 and I need manually to change CHMOD. How can I fix it?
vsftpd:
netstat -tap | grep ftp

Code:
tcp        0      0 *:ftp                   *:*                     LISTEN     -
tcp        0      0 server1.torrentz2.o:ftp 89.254.130.118:1442     ESTABLISHED-
tcp        0      0 server1.torrentz2.o:ftp 89.254.130.118:1442     ESTABLISHED-

netstat -tap
Code:
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 *:63392                 *:*                     LISTEN     -
tcp        0      0 *:20000                 *:*                     LISTEN     -
tcp        0      0 *:nfs                   *:*                     LISTEN     -
tcp        0      0 *:55938                 *:*                     LISTEN     -
tcp        0      0 *:42118                 *:*                     LISTEN     5500/rpc.mountd
tcp        0      0 server1.torrentz2:27015 *:*                     LISTEN     -
tcp        0      0 *:mysql                 *:*                     LISTEN     5096/mysqld
tcp        0      0 *:netbios-ssn           *:*                     LISTEN     5621/smbd
tcp        0      0 *:5901                  *:*                     LISTEN     -
tcp        0      0 *:sunrpc                *:*                     LISTEN     4283/portmap
tcp        0      0 *:www                   *:*                     LISTEN     -
tcp        0      0 server1.torrentz2.o:www infoginimp-wd08.w:39479 SYN_RECV   -
tcp        0      0 server1.torrentz2.o:www 213.158.194.228:4096    SYN_RECV   -
tcp        0      0 *:webmin                *:*                     LISTEN     6663/perl
tcp        0      0 *:81                    *:*                     LISTEN     -
tcp        0      0 *:x11-1                 *:*                     LISTEN     -
tcp        0      0 server1.torrentz:domain *:*                     LISTEN     -
tcp        0      0 localhost.locald:domain *:*                     LISTEN     -
tcp        0      0 *:ftp                   *:*                     LISTEN     -
tcp        0      0 *:821                   *:*                     LISTEN     5733/rpc.rquotad
tcp        0      0 *:46167                 *:*                     LISTEN     4302/rpc.statd
tcp        0      0 *:3128                  *:*                     LISTEN     5982/(squid)
tcp        0      0 localhost.lo:postgresql *:*                     LISTEN     5174/postgres
tcp        0      0 *:smtp                  *:*                     LISTEN     -
tcp        0      0 localhost.localdoma:953 *:*                     LISTEN     -
tcp        0      0 *:https                 *:*                     LISTEN     -
tcp        0      0 *:microsoft-ds          *:*                     LISTEN     5621/smbd
tcp        0      1 server1.torrentz2.o:www 213.158.194.228:6684    FIN_WAIT1  -
tcp        0      0 server1.torrentz2.o:www server1.torrentz2:33496 TIME_WAIT  -
tcp        0      0 server1.torrentz2.o:www server1.torrentz2:33467 TIME_WAIT  -
tcp        0      1 server1.torrentz2.o:www apn-77-112-37-6.g:16937 FIN_WAIT1  -
tcp        0      0 server1.torrentz2.o:www multi.gnt.lv:1097       TIME_WAIT  -
tcp        0      0 server1.torrentz2.o:www 125.18.239.135:41421    TIME_WAIT  -
tcp        0      0 server1.torrentz2.o:www courage.london.02:35621 TIME_WAIT  -
tcp       22      0 server1.torrentz2:27015 server1.torrentz2:36123 CLOSE_WAIT -
tcp        0      0 server1.torrentz2.o:www 213.158.194.228:20913   FIN_WAIT2  -
tcp        0      0 server1.torrentz2.o:www 202.91.18.245:54264     TIME_WAIT  -
tcp        0      0 server1.torrentz2.o:www vc-196-207-33-198:32138 ESTABLISHED-
tcp        0      0 server1.torrentz2.o:www vc-196-207-32-38.:24289 TIME_WAIT  -




vsftpd.conf:

Code:
ftp_username=root
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
listen_ipv6=NO
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=078
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to torrentz.lv FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
deny_email_enable=NO
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
chroot_local_user=NO
# users to NOT chroot().
chroot_list_enable=NO
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
force_dot_files=NO
#hide_file=
#anon_max_rate=
#local_max_rate=

why I have vsftpd_127.0.0.1.conf and vsftpd_MY_EXTERNAL_IP.conf?


my /etc/hosts:
Code:
127.0.0.1 localhost.localdomain localhost
193.46.236.141 server1.torrentz2.oo.lv server1

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback server1.torrentz2.oo.lv
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

When I try to CHMOD using PHP, I have error: permission denied (this file can be 644, 777, 660 but always the same error...)

Last edited by malinens; 25th February 2008 at 12:19.
Reply With Quote