HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=4)
-   -   The Perfect Setup - Ubuntu 6.10 Server (Edgy Eft) - Page 6 (http://www.howtoforge.com/forums/showthread.php?t=8673)

Linocks 30th November 2006 17:29

The Perfect Setup - Ubuntu 6.10 Server (Edgy Eft) - Page 6
 
I am going through the above install got this message : -

Code:

root@web:/etc/postfix/ssl# apt-get install proftpd proftpd-common ucf
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package proftpd-common is a virtual package provided by:
  proftpd 1.3.0-9ubuntu0.1
You should explicitly select one to install.
E: Package proftpd-common has no installation candidate
root@web:/etc/postfix/ssl#

It is not what I expected. :(

I have also in my haste added the below commands not realising that I didn't have to do it because I intend to install ISPConfig. :eek:

Code:

postconf -e 'home_mailbox = Maildir/'
postconf -e 'mailbox_command ='
/etc/init.d/postfix restart

Do I need to rectify this & if so how do I do it.

I was so pleased that my installation appeared to be going well up to this point.

Thanks !!

PS - I will be away for a couple of days!!

marinedalek 30th November 2006 21:09

I've had the same error a few minutes ago. Ran through the install the other day and it didn't happen. Is the relevant server/file down?

marinedalek 1st December 2006 00:51

For the moment I'd just use
Code:

apt-get install proftpd
That seems to get the latest version. If not, it's only a few hours work to start the install from scratch if needs be.

pyropoptrt 1st December 2006 06:08

When trying to install proftpd I get the following error (I also get the same error trying to install courier). I have not touched my sources.list (nor do I know how to access it)

Code:

apt-get install proftpd
Reading package lists... Done
Building dependency tree     
Reading state information... Done
E: Couldn't find package proftpd


pyropoptrt 1st December 2006 07:01

nm on my above reply. I google sources.list and uncommented all the other servers and I was able to find proftpd and courier. Both are installed now without any problems :D

falko 1st December 2006 16:11

Quote:

Originally Posted by pyropoptrt
When trying to install proftpd I get the following error (I also get the same error trying to install courier). I have not touched my sources.list (nor do I know how to access it)

Code:

apt-get install proftpd
Reading package lists... Done
Building dependency tree     
Reading state information... Done
E: Couldn't find package proftpd


Run
Code:

apt-get update
to update your package database.

falko 1st December 2006 16:13

Quote:

Originally Posted by Linocks
I am going through the above install got this message : -

Code:

root@web:/etc/postfix/ssl# apt-get install proftpd proftpd-common ucf
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package proftpd-common is a virtual package provided by:
  proftpd 1.3.0-9ubuntu0.1
You should explicitly select one to install.
E: Package proftpd-common has no installation candidate
root@web:/etc/postfix/ssl#

It is not what I expected. :(

There was a bug in old Proftpd packages. I think they created a new one that conatains everything you need, and therefore proftpd-common doesn't exist anymore. Just install the package proftpd.

Quote:

Originally Posted by Linocks
I have also in my haste added the below commands not realising that I didn't have to do it because I intend to install ISPConfig. :eek:

Code:

postconf -e 'home_mailbox = Maildir/'
postconf -e 'mailbox_command ='
/etc/init.d/postfix restart

Do I need to rectify this & if so how do I do it.

You can leave it as it is. It's no problem. :)

Linocks 3rd December 2006 17:29

The Perfect Setup - Ubuntu 6.10 Server (Edgy Eft) - Page 7 : Item 19
 
1 Attachment(s)
Quote:

Originally Posted by falko
There was a bug in old Proftpd packages. I think they created a new one that conatains everything you need, and therefore proftpd-common doesn't exist anymore. Just install the package proftpd.

I did that & it worked! Thanks! :)

Quote:

Originally Posted by falko
You can leave it as it is. It's no problem. :)

Thanks again! I find comfort with that knowledge.

I then got to installing ISPConfig but that failed.

See attached output!!

What went wrong? :confused:

falko 4th December 2006 13:02

Please install g++:
Code:

apt-get install g++

Linocks 5th December 2006 21:10

The Perfect Setup - Ubuntu 6.10 Server (Edgy Eft) - Page 6
 
Quote:

Originally Posted by falko
Please install g++:
Code:

apt-get install g++

Okay! I have done that but I got an error message

Code:

root@web:~# apt-get install g++
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  g++-4.1 libstdc++6-4.1-dev
Suggested packages:
  gcc-4.1-doc lib64stdc++6 libstdc++6-4.1-doc
The following NEW packages will be installed
  g++ g++-4.1 libstdc++6-4.1-dev
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 4194kB of archives.
After unpacking 16.5MB of additional disk space will be used.
Do you want to continue [Y/n]?
WARNING: The following packages cannot be authenticated!
  libstdc++6-4.1-dev g++-4.1 g++
Install these packages without verification [y/N]?
E: Some packages could not be authenticated

So I did it again but this time asking for it to be installed without verifying the packages : -

Code:

root@web:~# apt-get install g++
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  g++-4.1 libstdc++6-4.1-dev
Suggested packages:
  gcc-4.1-doc lib64stdc++6 libstdc++6-4.1-doc
The following NEW packages will be installed
  g++ g++-4.1 libstdc++6-4.1-dev
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 4194kB of archives.
After unpacking 16.5MB of additional disk space will be used.
Do you want to continue [Y/n]?
WARNING: The following packages cannot be authenticated!
  libstdc++6-4.1-dev g++-4.1 g++
Install these packages without verification [y/N]? y
Get: 1 http://gb.archive.ubuntu.com edgy/main libstdc++6-4.1-dev 4.1.1-13ubuntu5 [1619kB]
Get: 2 http://gb.archive.ubuntu.com edgy/main g++-4.1 4.1.1-13ubuntu5 [2573kB]
Get: 3 http://gb.archive.ubuntu.com edgy/main g++ 4:4.1.1-6ubuntu3 [1434B]
Fetched 4194kB in 17s (238kB/s)
Selecting previously deselected package libstdc++6-4.1-dev.
(Reading database ... 23709 files and directories currently installed.)
Unpacking libstdc++6-4.1-dev (from .../libstdc++6-4.1-dev_4.1.1-13ubuntu5_i386.deb) ...
Selecting previously deselected package g++-4.1.
Unpacking g++-4.1 (from .../g++-4.1_4.1.1-13ubuntu5_i386.deb) ...
Selecting previously deselected package g++.
Unpacking g++ (from .../g++_4%3a4.1.1-6ubuntu3_i386.deb) ...
Setting up g++-4.1 (4.1.1-13ubuntu5) ...
Setting up libstdc++6-4.1-dev (4.1.1-13ubuntu5) ...
Setting up g++ (4.1.1-6ubuntu3) ...

root@web:~#

Now do I try to install IPConfig again? :confused:


All times are GMT +2. The time now is 13:58.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.