HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   2.2.8 wont upgrade my 2.2.7 (http://www.howtoforge.com/forums/showthread.php?t=8402)

bwrob 22nd November 2006 16:57

2.2.8 wont upgrade my 2.2.7
 
Hi
Attempted to upgrade from 2.2.7
to 2.2.8 but it comes back with an error
that:
php binary that comes with 2.2.8 is
not comatable with my system.

Suse 9.3 with php 5.0.3-14.32

bob

paulrobert_a 22nd November 2006 17:24

yeah I've got the same problem, attempted to upgrade got the same compile error when it came to php.

ubuntu 5.10

till 22nd November 2006 17:58

Quote:

Originally Posted by paulrobert_a
yeah I've got the same problem, attempted to upgrade got the same compile error when it came to php.

Which compile error? The first post does not contain a php compilation error message. Please post the exact error message from the PHP compilation output.

Before you start the setup again, you will have to restore the current ISPConfig installation from the backups that are in your /tmp directory.

gavin 22nd November 2006 18:10

Same issue here
 
It seems as though the error comes up at the gcc comiler instance when PHP is being installed.

gcc is shown to be not ok/present (although installed ver gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5))

After that, all modules (clamav.tar.gz, asp.tar.gz) show up as failed (could not stat -- file does not exist?)

Don't have the exact error anymore because I went straight back to look for the backups (which are gone, it seems?) and the system is broken...

Before "Lex" was shown to be found, "Gcc" was found, too...

Exact message from log:

Wed Nov 22 18:20:37 SAST 2006 - [ISPConfig] - deleted directory /root/ispconfig/
Wed Nov 22 18:30:31 SAST 2006 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Wed Nov 22 18:30:38 SAST 2006 - [ISPConfig] - ERROR: The PHP binary coming with
ISPConfig does not work properly on your system! The installation routine stops
here!

bwrob 22nd November 2006 18:22

last few lines from install log:
Wed Nov 22 07:24:16 PST 2006 - [ISPConfig] - deleted directory /root/ispconfig/
Wed Nov 22 07:30:38 PST 2006 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Wed Nov 22 07:30:44 PST 2006 - [ISPConfig] - ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

I did my own backup before i did attempted the upgrade
so, it was a matter of reinstalling it.

Server works fine but with 2.2.7 on it.

Maybe this would help.

gavin 22nd November 2006 18:31

I don't see the unpacked binaries in install_ispconfig/binaries -- are those the ones being stat'd -- if so, they're missing?

till 22nd November 2006 18:37

Quote:

Originally Posted by bwrob
last few lines from install log:
Wed Nov 22 07:24:16 PST 2006 - [ISPConfig] - deleted directory /root/ispconfig/
Wed Nov 22 07:30:38 PST 2006 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Wed Nov 22 07:30:44 PST 2006 - [ISPConfig] - ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

I did my own backup before i did attempted the upgrade
so, it was a matter of reinstalling it.

Server works fine but with 2.2.7 on it.

Maybe this would help.


The compiler output is not in the install log. Please check if the ISPConfig mysql database is still there. What is the output of:

ls /tmp/*.gz

till 22nd November 2006 18:39

Quote:

Originally Posted by gavin
I don't see the unpacked binaries in install_ispconfig/binaries -- are those the ones being stat'd -- if so, they're missing?

They are misiing because of the compilation failure. Without the error message of the compiler output I cant say what causes this problem.

I just ran a update on a debian 3.1 installed with the perfect setup instructions and it compiled without errors.

Traxus 22nd November 2006 18:40

I was also unable to upgrade from 2.2.7 to 2.2.8. Bellow is the error message I got while building it on my Suse 10 instalation. If You require any extra info, please let me know.

Code:

Configuring libtool
checking build system type... i686-pc-linux-gnu
checking for ld used by gcc... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking for c++... no
checking for g++... no
checking for gcc... gcc
checking whether the C++ compiler (gcc  ) works... no
configure: error: installation or configuration problem: C++ compiler cannot create executables.
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 849: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: Das mitgelieferte PHP-Binary funktioniert auf Ihrem System nicht! Die Installation bricht hier ab!
mars:~/install_ispconfig #


gavin 22nd November 2006 18:40

On my system, all db_ispconfig tables are still there (last update at 18h20 -- traffic data).

ls /tmp/*.gz output has two home_adminispconfig and root_ispconfig backups (last one from 10_11_2006 -- I think the date of the last update?)

/tmp/home_admispconfig_08_09_2006__15_51_35.tar.gz
/tmp/home_admispconfig_10_11_2006__14_48_14.tar.gz
/tmp/root_ispconfig_08_09_2006__15_51_35.tar.gz
/tmp/root_ispconfig_10_11_2006__14_48_14.tar.gz


All times are GMT +2. The time now is 14:30.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.