HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)

- Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)

- - I'm dying! (http://www.howtoforge.com/forums/showthread.php?t=6567)

I am trying to upgrade from ISPConfig 2.0 to 2.2.6. Using ssh I did the following:

cd /home/rmoore/Desktop
wget http://umn.dl.sourceforge.net/source...g-2.2.6.tar.gz
tar xvfz ISPConfig*.tar.gz
cd install_ispconfig
./setup

I have done this once before on the box itself and didn't have any problems. This time I got the following error and I'm really worried:

Code:

***************************************************************************

ERROR: the required HTML::Parser (version 3.24) module is not installed.



  Version 3.31 or later is recommended.



  HTML is used for an ever-increasing amount of email so this dependency

  is unavoidable.  Run "perldoc -q html" for additional information.





***************************************************************************

NOTE: the optional DB_File module is not installed.



  Used to store data on-disk, for the Bayes-style logic and

  auto-whitelist.  *Much* more efficient than the other standard Perl

  database packages.  Strongly recommended.





***************************************************************************

NOTE: the optional Net::DNS (version 0.34) module is not installed.



  Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),

  perform MX checks, and is also used when manually reporting spam to

  SpamCop.  Recommended.



  If this is installed and you are using network tests of any variety

  (which is the default), then you need to make sure the Net::DNS

  version is sufficiently up-to-date:



  - version 0.34 or higher on Unix systems

  - version 0.46 or higher on Windows systems





***************************************************************************

NOTE: the optional Mail::SPF::Query module is not installed.



  Used to check DNS Sender Policy Framework (SPF) records to fight email

  address forgery and make it easier to identify spams.





***************************************************************************

NOTE: the optional IP::Country module is not installed.



  Used by the RelayCountry plugin (not enabled by default) to determine

  the domain country codes of each relay in the path of an email.





***************************************************************************

NOTE: the optional Razor2 (version 2.61) module is not installed.



  Used to check message signatures against Vipul's Razor collaborative

  filtering network. Razor has a large number of dependencies on CPAN

  modules. Feel free to skip installing it, if this makes you nervous;

  SpamAssassin will still work well without it.



  More info on installing and using Razor can be found

  at http://wiki.apache.org/spamassassin/InstallingRazor .





***************************************************************************

NOTE: the optional Net::Ident module is not installed.



  If you plan to use the --auth-ident option to spamd, you will need

  to install this module.





***************************************************************************

NOTE: the optional IO::Socket::INET6 module is not installed.



  This is required if the first nameserver listed in your IP

  configuration or /etc/resolv.conf file is available only via

  an IPv6 address.





***************************************************************************

NOTE: the optional IO::Socket::SSL module is not installed.



  If you wish to use SSL encryption to communicate between spamc and

  spamd (the --ssl option to spamd), you need to install this

  module. (You will need the OpenSSL libraries and use the

  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL

  compatibile spamc.)





***************************************************************************

NOTE: the optional Archive::Tar module is not installed.



  The "sa-update" script requires this module to access tar update

  archive files.





***************************************************************************

NOTE: the optional IO::Zlib module is not installed.



  The "sa-update" script requires this module to access compressed

  update archive files.



REQUIRED module missing: HTML::Parser

optional module missing: DB_File

optional module missing: Net::DNS

optional module missing: Mail::SPF::Query

optional module missing: IP::Country

optional module missing: Razor2

optional module missing: Net::Ident

optional module missing: IO::Socket::INET6

optional module missing: IO::Socket::SSL

optional module missing: Archive::Tar

optional module missing: IO::Zlib



warning: some functionality may not be available,

please read the above report before continuing!



ERROR: Could not configure SpamAssassin

cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory

mv: cannot stat `binaries/aps.tar.gz': No such file or directory

mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory

mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory

mv: cannot stat `binaries/clamav.tar.gz': No such file or directory

mv: cannot stat `binaries/cronolog': No such file or directory

mv: cannot stat `binaries/cronosplit': No such file or directory

mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory

mv: cannot stat `binaries/zip': No such file or directory

mv: cannot stat `binaries/unzip': No such file or directory

tar: spamassassin.tar.gz: Cannot open: No such file or directory

tar: Error is not recoverable: exiting now

tar: Child returned status 2

tar: Error exit delayed from previous errors

mv: cannot stat `spamassassin': No such file or directory

tar: uudeview.tar.gz: Cannot open: No such file or directory

tar: Error is not recoverable: exiting now

tar: Child returned status 2

tar: Error exit delayed from previous errors

mv: cannot stat `uudeview': No such file or directory

tar: clamav.tar.gz: Cannot open: No such file or directory

tar: Error is not recoverable: exiting now

tar: Child returned status 2

tar: Error exit delayed from previous errors

mv: cannot stat `clamav': No such file or directory

tar: aps.tar.gz: Cannot open: No such file or directory

tar: Error is not recoverable: exiting now

tar: Child returned status 2

tar: Error exit delayed from previous errors

./setup2: line 816: ispconfig_tmp/php/bin/php: No such file or directory

ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

The required HTML::Parser Perl module is missing. Did you install that system using one of the Perfect Setups from HowtoForge? Because these tutorials install all needed Perl modules.

Yes, for SuSe 9.2. It was last year, though. I set it up and updated it to ISPConfig 2.0.7 with no problems. Then, with this update, I got the error.

Please restore the backup from /tmp, then run the following steps to update your perl installation and then unpack and run the ispconfig installer again.

Quote:

Install some Perl Modules needed by SpamAssassin (comes with ISPConfig)

Installation using the Perl Shell

Login to your command line as root and run the following command to start the Perl shell:

perl -MCPAN -e shell

If you run the Perl shell for the first time you will be asked some questions. In most cases the default answers are ok.

Please note: If you run a firewall on your system you might have to turn it off while working on the Perl shell in order for the Perl shell to be able to fetch the needed modules without a big delay. You can switch it on afterwards.

The big advantage of the Perl shell compared to the two other methods described here is that it cares about dependencies when installing new modules. I.e., if it turns out that a prerequisite Perl module is missing when you install another module the Perl shell asks you if it should install the prerequisite module for you. You should answer that question with "Yes".

Run the following commands to install the modules needed by SpamAssassin:

install HTML::Parser
install Net::DNS (when prompted to enable tests, choose no)
install Digest::SHA1
install DB_File
q (to leave the Perl shell)

If a module is already installed on your system you will get a message similar to this one:

HTML::Parser is up to date.

Successful installation of a module looks like this:

/usr/bin/make install -- OK

The only files in the /tmp folder are nine months old from a past upgrade. It didn't backup files from this upgrade attempt. Perhaps because I tried upgrading twice.

The date I tried to upgrade was 08_31_06 . . .

Code:

/tmp # ls

.              .shtool.13389  .shtool.6181

..             .shtool.13415  .shtool.6207

.ICE-unix      .shtool.13441  .shtool.6233

.X0-lock       .shtool.13467  .shtool.6259

.X11-unix      .shtool.13493  .shtool.6285

.shtool.10768  .shtool.13519  .shtool.6311

.shtool.10794  .shtool.13545  .shtool.6337

.shtool.10827  .shtool.13571  .shtool.6363

.shtool.10855  .shtool.13597  .shtool.6389

.shtool.10885  .shtool.13623  .shtool.6415

.shtool.10913  .shtool.13649  .shtool.6441

.shtool.10939  .shtool.13675  .shtool.6467

.shtool.10965  .shtool.19996  .shtool.6493

.shtool.10992  .shtool.20022  .shtool.6519

.shtool.11018  .shtool.20048  .shtool.6571

.shtool.11044  .shtool.20074  .shtool.6597

.shtool.11070  .shtool.20100  .shtool.6623

.shtool.11071  .shtool.20126  .shtool.7933

.shtool.11096  .shtool.20152  .shtool.7959

.shtool.11097  .shtool.20178  .shtool.7985

.shtool.11122  .shtool.20204  .shtool.8011

.shtool.11123  .shtool.20230  .shtool.8037

.shtool.11148  .shtool.20256  .shtool.8063

.shtool.11149  .shtool.20282  .shtool.8089

.shtool.11174  .shtool.20308  .shtool.8115

.shtool.11175  .shtool.20334  .shtool.8141

.shtool.11200  .shtool.20360  .shtool.8167

.shtool.11201  .shtool.20386  .shtool.8193

.shtool.11226  .shtool.20412  .shtool.8219

.shtool.11227  .shtool.20438  .shtool.8245

.shtool.11253  .shtool.26148  .shtool.8271

.shtool.11279  .shtool.26174  .shtool.8297

.shtool.11305  .shtool.26200  .shtool.8323

.shtool.11331  .shtool.26226  .shtool.8349

.shtool.11357  .shtool.26252  .shtool.8375

.shtool.11383  .shtool.26278  .shtool.8880

.shtool.11409  .shtool.26304  .shtool.8906

.shtool.11435  .shtool.26330  .shtool.8932

.shtool.11461  .shtool.26356  .shtool.8958

.shtool.11487  .shtool.26382  .shtool.8984

.shtool.11513  .shtool.26408  .shtool.9010

.shtool.11634  .shtool.26434  .shtool.9036

.shtool.11660  .shtool.26460  .shtool.9062

.shtool.11686  .shtool.26486  .shtool.9088

.shtool.11712  .shtool.26512  .shtool.9114

.shtool.11738  .shtool.26538  .shtool.9144

.shtool.11764  .shtool.26564  .shtool.9170

.shtool.11790  .shtool.26793  .shtool.9196

.shtool.11816  .shtool.26819  .shtool.9222

.shtool.11842  .shtool.26845  .shtool.9248

.shtool.11868  .shtool.26871  .shtool.9274

.shtool.11894  .shtool.26897  .shtool.9300

.shtool.11920  .shtool.26923  .shtool.9326

.shtool.11946  .shtool.26949  0245293845

.shtool.11972  .shtool.26975  0700540563

.shtool.11998  .shtool.27001  1258388954

.shtool.12024  .shtool.27027  1422060579

.shtool.12050  .shtool.27053  1543808506

.shtool.12076  .shtool.27079  1668625754

.shtool.12555  .shtool.27105  1815989296

.shtool.12581  .shtool.27131  1972462927

.shtool.12607  .shtool.27157  existing_db_08_17_2005__16_06_38.sql

.shtool.12633  .shtool.27183  existing_db_12_28_2005__10_24_36.sql

.shtool.12659  .shtool.27209  gconfd-root

.shtool.12685  .shtool.27235  gpg-9sGZN1

.shtool.12711  .shtool.27647  gpg-KkTfEg

.shtool.12737  .shtool.27673  gpg-ToE6hU

.shtool.12763  .shtool.27699  gpg-VFP1bj

.shtool.12789  .shtool.27725  gpg-ply2Y5

.shtool.12815  .shtool.27751  home_admispconfig_08_17_2005__16_06_38.tar.gz

.shtool.12841  .shtool.27777  home_admispconfig_12_28_2005__10_24_36.tar.gz

.shtool.12867  .shtool.27803  hsperfdata_root

.shtool.12893  .shtool.27829  kde-rmoore

.shtool.12919  .shtool.27855  kde-root

.shtool.12945  .shtool.27881  ksocket-rmoore

.shtool.12971  .shtool.27907  ksocket-root

.shtool.12997  .shtool.27933  mcop-rmoore

.shtool.13233  .shtool.27959  mcop-root

.shtool.13259  .shtool.27985  root_ispconfig_08_17_2005__16_06_38.tar.gz

.shtool.13285  .shtool.28011  root_ispconfig_12_28_2005__10_24_36.tar.gz

.shtool.13311  .shtool.28037  sysconfig-update

.shtool.13337  .shtool.28063

.shtool.13363  .shtool.28089

In case this helps:

Code:

ls -la /root/ispconfig

/bin/ls: /root/ispconfig: No such file or directory

Code:

ls -la /home/admispconfig

total 9

drwxr-xr-x  4 admispconfig admispconfig 168 Aug 17  2005 .

drwxr-xr-x  5 root         root         128 Aug 17  2005 ..

-rwxr-xr-x  1 admispconfig admispconfig  24 Dec 28  2005 .forward

-rwxr-xr-x  1 admispconfig admispconfig 176 Dec 28  2005 .procmailrc

drwxr-xr-x  8 admispconfig admispconfig 312 Aug 25 08:35 ispconfig

drwxr-xr-x  2 admispconfig admispconfig 584 Aug 31 21:28 mailstats

Does the ISPConfig MySQL database still exist?

I'm guessing, based on the date, that this is new from the second update attempt.

Code:

ls /var/lib/mysql

.            mysql       mysqld.log-20060804.gz  mysqld.pid

..           mysql.sock  mysqld.log-20060827.gz  test

ispconfigdb  mysqld.log  mysqld.log-20060901.gz

Looks like the database ispconfigdb is your ISPConfig database.

What's the output of

Code:

mysql -u root -p

USE ispconfigdb;

SHOW TABLES;

quit;

Code:

rmmail:~ # mysql -u root -p

Enter password: 

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 2 to server version: 4.0.21



Type 'help;' or '\h' for help. Type '\c' to clear the buffer.



mysql> USE ispconfigdb;

Database changed

mysql> SHOW TABLES;

+-----------------------+

| Tables_in_ispconfigdb |

+-----------------------+

| del_status            |

| dns_a                 |

| dns_cname             |

| dns_dep               |

| dns_isp_dns           |

| dns_mx                |

| dns_nodes             |

| dns_secondary         |

| dns_spf               |

| doctype               |

| groups                |

| help_documents        |

| help_nodes            |

| isp_com               |

| isp_dep               |

| isp_dienste           |

| isp_firewall          |

| isp_htaccess          |

| isp_isp_actions       |

| isp_isp_admin         |

| isp_isp_datenbank     |

| isp_isp_domain        |

| isp_isp_kunde         |

| isp_isp_reseller      |

| isp_isp_user          |

| isp_isp_web           |

| isp_isp_web_template  |

| isp_monitor           |

| isp_nodes             |

| isp_server            |

| isp_server_ip         |

| isp_serverstatus      |

| isp_traffic           |

| isp_traffic_ip        |

| listtype              |

| login                 |

| multidoc_dep          |

| multidoc_nodes        |

| session               |

| sys_config            |

| sys_dep               |

| sys_modules           |

| sys_news              |

| sys_nodes             |

| sys_user              |

| user_groups           |

+-----------------------+

46 rows in set (0.09 sec)



mysql> quit;

Bye