HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=27)
-   -   pure-ftpd on centos 5.8 (http://www.howtoforge.com/forums/showthread.php?t=56730)

veneficus 29th March 2012 19:20

pure-ftpd on centos 5.8
 
Hi to all,
i am uite newby to ispconfig. but finally i got ISPconfig3 following the perfect guide.

The first issue i had for noe if for the FTP user using pure-ftpd installed from repos. filezilla client correcltly connects to server but give the error:
Disconnected from server ECONNABORTED - Connection aborted
i can't read server directories.

Iptables is disabled, fail2ban was disabled for testing portposes, the only thing log says is user is connected then dissconected, i did try to use another FTP client, same error.

also i have tried with passive or active connection, no luck.

i take a look the client directory exist, it existes, maybe a path ? problem in the ISPconfig cp? but i don't really find a way to fix it

till 30th March 2012 08:28

Please post the exact lines you get in the log.

veneficus 30th March 2012 10:46

here's more info
 
Thanks for your answer, so here more details:

HTML Code:

pure-ftpd-1.0.29-1.el5.1

here the logo from : /var/log/messages

HTML Code:

Mar 30 05:25:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:30:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:30:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:35:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:35:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:40:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:40:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:45:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:45:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:50:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:50:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 05:55:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 05:55:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:00:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:00:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:05:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:05:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:10:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:10:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:15:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:15:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:20:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:20:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:25:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:25:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:30:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:30:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:35:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:35:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:40:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:40:02 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:42:39 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] New connection from 95.244.92.42
Mar 30 06:42:39 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] gloria is now logged in
Mar 30 06:43:07 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] New connection from 95.244.92.42
Mar 30 06:43:07 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] gloria is now logged in
Mar 30 06:44:38 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] New connection from 95.244.92.42
Mar 30 06:44:38 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] gloria is now logged in
Mar 30 06:45:01 ocsinet pure-ftpd: (gloria@95.244.92.42) [INFO] Logout.
Mar 30 06:45:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:45:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Mar 30 06:45:29 ocsinet pure-ftpd: (gloria@95.244.92.42) [INFO] Logout.
Mar 30 06:47:00 ocsinet pure-ftpd: (gloria@95.244.92.42) [INFO] Logout.
Mar 30 06:49:41 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] New connection from 95.244.92.42
Mar 30 06:49:41 ocsinet pure-ftpd: (?@95.244.92.42) [INFO] gloria is now logged in
Mar 30 06:50:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Mar 30 06:50:01 ocsinet pure-ftpd: (?@127.0.0.1) [INFO] Logout.

As you can see there's a lot of 127.0.0.1 connection, i don't know why this happens.

the command: cat /proc/sys/net/ipv4/ip_local_port_range

says: 32768 61000

for complete all details i give you also the pro-ftpd.conf file:
HTML Code:

############################################################
#                                                          #
#        Configuration file for pure-ftpd wrappers        #
#                                                          #
############################################################

# If you want to run Pure-FTPd with this configuration
# instead of command-line options, please run the
# following command :
#
# /usr/sbin/pure-config.pl /etc/pure-ftpd/pure-ftpd.conf
#
# Please don't forget to have a look at documentation at
# http://www.pureftpd.org/documentation.shtml for a complete list of
# options.

# Cage in every user in his home directory

ChrootEveryone              yes



# If the previous option is set to "no", members of the following group
# won't be caged. Others will be. If you don't want chroot()ing anyone,
# just comment out ChrootEveryone and TrustedGID.

# TrustedGID                    100



# Turn on compatibility hacks for broken clients

BrokenClientsCompatibility  no



# Maximum number of simultaneous users

MaxClientsNumber            50



# Fork in background

Daemonize                  yes
# Maximum number of sim clients with the same IP address

MaxClientsPerIP            8



# If you want to log all client commands, set this to "yes".
# This directive can be duplicated to also log server responses.

VerboseLog                  yes



# List dot-files even when the client doesn't send "-a".

DisplayDotFiles            yes



# Don't allow authenticated users - have a public anonymous FTP only.

AnonymousOnly              no



# Disallow anonymous connections. Only allow authenticated users.

NoAnonymous                yes



# Syslog facility (auth, authpriv, daemon, ftp, security, user, local*)
# The default facility is "ftp". "none" disables logging.

SyslogFacility              ftp



# Display fortune cookies

# FortunesFile              /usr/share/fortune/zippy

# Don't resolve host names in log files. Logs are less verbose, but
# it uses less bandwidth. Set this to "yes" on very busy servers or
# if you don't have a working DNS.

DontResolve                yes



# Maximum idle time in minutes (default = 15 minutes)

MaxIdleTime                15



# LDAP configuration file (see README.LDAP)

# LDAPConfigFile                /etc/pure-ftpd/pureftpd-ldap.conf



# MySQL configuration file (see README.MySQL)

MySQLConfigFile              /etc/pure-ftpd/pureftpd-mysql.conf


# Postgres configuration file (see README.PGSQL)

# PGSQLConfigFile              /etc/pure-ftpd/pureftpd-pgsql.conf


# PureDB user database (see README.Virtual-Users)

# PureDB                        /etc/pure-ftpd/pureftpd.pdb


# Path to pure-authd socket (see README.Authentication-Modules)

# ExtAuth                      /var/run/ftpd.sock



# If you want to enable PAM authentication, uncomment the following line

# PAMAuthentication            yes

# If you want simple Unix (/etc/passwd) authentication, uncomment this

# UnixAuthentication            yes



# Please note that LDAPConfigFile, MySQLConfigFile, PAMAuthentication and
# UnixAuthentication can be used only once, but they can be combined
# together. For instance, if you use MySQLConfigFile, then UnixAuthentication,
# the SQL server will be asked. If the SQL authentication fails because the
# user wasn't found, another try # will be done with /etc/passwd and
# /etc/shadow. If the SQL authentication fails because the password was wrong,
# the authentication chain stops here. Authentication methods are chained in
# the order they are given.



# 'ls' recursion limits. The first argument is the maximum number of
# files to be displayed. The second one is the max subdirectories depth

LimitRecursion              7500 8



# Are anonymous users allowed to create new directories ?

AnonymousCanCreateDirs      no



# If the system is more loaded than the following value,
# anonymous users aren't allowed to download.

MaxLoad                    4



# Port range for passive connections replies. - for firewalling.

#  PassivePortRange          30000 50000



# Force an IP address in PASV/EPSV/SPSV replies. - for NAT. # Symbolic host names are also accepted for gateways with dynamic IP
# addresses.

# ForcePassiveIP                192.168.0.1



# Upload/download ratio for anonymous users.

# AnonymousRatio                1 10



# Upload/download ratio for all users.
# This directive superscedes the previous one.

# UserRatio                1 10



# Disallow downloading of files owned by "ftp", ie.
# files that were uploaded but not validated by a local admin.


AntiWarez                  yes



# IP address/port to listen to (default=all IP and port 21).

# Bind                      127.0.0.1,21



# Maximum bandwidth for anonymous users in KB/s

# AnonymousBandwidth            8



# Maximum bandwidth for *all* users (including anonymous) in KB/s
# Use AnonymousBandwidth *or* UserBandwidth, both makes no sense.

# UserBandwidth            8

# File creation mask. <umask for files>:<umask for dirs> .
# 177:077 if you feel paranoid.

Umask                      133:022



# Minimum UID for an authenticated user to log in.

MinUID                      500



# Do not use the /etc/ftpusers file to disable accounts. We're already
# using MinUID to block users with uid < 500

UseFtpUsers no



# Allow FXP transfers for authenticated users.

AllowUserFXP                no



# Allow anonymous FXP for anonymous and non-anonymous users.

AllowAnonymousFXP          no



# Users can't delete/write files beginning with a dot ('.')
# even if they own them. If TrustedGID is enabled, this group
# will have access to dot-files, though.

ProhibitDotFilesWrite      no



# Prohibit *reading* of files beginning with a dot (.history, .ssh...)

ProhibitDotFilesRead        no

# Never overwrite files. When a file whoose name already exist is uploaded,
# it get automatically renamed to file.1, file.2, file.3, ...

AutoRename                  no



# Disallow anonymous users to upload new files (no = upload is allowed)

AnonymousCantUpload        yes



# Only connections to this specific IP address are allowed to be
# non-anonymous. You can use this directive to open several public IPs for
# anonymous FTP, and keep a private firewalled IP for remote administration.
# You can also only allow a non-routable local IP (like 10.x.x.x) to
# authenticate, and keep a public anon-only FTP server on another IP.

#TrustedIP                  10.1.1.1



# If you want to add the PID to every logged line, uncomment the following
# line.

#LogPID                    yes



# Create an additional log file with transfers logged in a Apache-like format :
# fw.c9x.org - jedi [13/Dec/1975:19:36:39] "GET /ftp/linux.tar.bz2" 200 21809338
# This log file can then be processed by www traffic analyzers.

AltLog                    clf:/var/log/pureftpd.log



# Create an additional log file with transfers logged in a format optimized
# for statistic reports.

# AltLog                    stats:/var/log/pureftpd.log



# Create an additional log file with transfers logged in the standard W3C# format (compatible with most commercial log analyzers)

# AltLog                    w3c:/var/log/pureftpd.log



# Disallow the CHMOD command. Users can't change perms of their files.

#NoChmod                    yes



# Allow users to resume and upload files, but *NOT* to delete them.

#KeepAllFiles                yes



# Automatically create home directories if they are missing

#CreateHomeDir              yes
# Enable virtual quotas. The first number is the max number of files.
# The second number is the max size of megabytes.
# So 1000:10 limits every user to 1000 files and 10 Mb.

#Quota                      1000:10



# If your pure-ftpd has been compiled with standalone support, you can change
# the location of the pid file. The default is /var/run/pure-ftpd.pid

#PIDFile                    /var/run/pure-ftpd.pid



# If your pure-ftpd has been compiled with pure-uploadscript support,
# this will make pure-ftpd write info about new uploads to
# /var/run/pure-ftpd.upload.pipe so pure-uploadscript can read it and
# spawn a script to handle the upload.

#CallUploadScript yes



# This option is useful with servers where anonymous upload is
# allowed. As /var/ftp is in /var, it save some space and protect
# the log files. When the partition is more that X percent full,
# new uploads are disallowed.

MaxDiskUsage              99



# Set to 'yes' if you don't want your users to rename files.

#NoRename                  yes



# Be 'customer proof' : workaround against common customer mistakes like
# 'chmod 0 public_html', that are valid, but that could cause ignorant
# customers to lock their files, and then keep your technical support busy
# with silly issues. If you're sure all your users have some basic Unix
# knowledge, this feature is useless. If you're a hosting service, enable it.

CustomerProof              yes



# Per-user concurrency limits. It will only work if the FTP server has
# been compiled with --with-peruserlimits (and this is the case on
# most binary distributions) .
# The format is : <max sessions per user>:<max anonymous sessions>
# For instance, 3:20 means that the same authenticated user can have 3 active
# sessions max. And there are 20 anonymous sessions max.

# PerUserLimits            3:20



# When a file is uploaded and there is already a previous version of the file
# with the same name, the old file will neither get removed nor truncated.
# Upload will take place in a temporary file and once the upload is complete,
# the switch to the new version will be atomic. For instance, when a large PHP
# script is being uploaded, the web server will still serve the old version and
# immediatly switch to the new one as soon as the full file will have been
# transfered. This option is incompatible with virtual quotas.

# NoTruncate              yes



# This option can accept three values :
# 0 : disable SSL/TLS encryption layer (default).
# 1 : accept both traditional and encrypted sessions.
# 2 : refuse connections that don't use SSL/TLS security mechanisms,
#    including anonymous sessions.
# Do _not_ uncomment this blindly. Be sure that :
# 1) Your server has been compiled with SSL/TLS support (--with-tls),
# 2) A valid certificate is in place,
# 3) Only compatible clients will log in.

# TLS                      1



# Listen only to IPv4 addresses in standalone mode (ie. disable IPv6)
# By default, both IPv4 and IPv6 are enabled.

# IPV4Only                yes

# Listen only to IPv6 addresses in standalone mode (ie. disable IPv4)
# By default, both IPv4 and IPv6 are enabled.

# IPV6Only                yes

# UTF-8 support for file names (RFC 2640)
# Define charset of the server filesystem and optionnally the default charset
# for remote clients if they don't use UTF-8.
# Works only if pure-ftpd has been compiled with --with-rfc2640

# FileSystemCharset    big5
# ClientCharset        big5

If you need more just tell thanks in advance for any help :)

veneficus 30th March 2012 11:02

Sorry forgot to add filezilla client log:

Code:

Risposta:        220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Risposta:        220-You are user number 1 of 50 allowed.
Risposta:        220-Local time is now 11:00. Server port: 21.
Risposta:        220-This is a private system - No anonymous login
Risposta:        220-IPv6 connections are also welcome on this server.
Risposta:        220 You will be disconnected after 15 minutes of inactivity.
Comando:        USER gloria
Risposta:        331 User gloria OK. Password required
Comando:        PASS **********
Risposta:        230-User gloria has group access to:  client3    sshusers 
Risposta:        230 OK. Current restricted directory is /
Comando:        OPTS UTF8 ON
Risposta:        200 OK, UTF-8 enabled
Stato:        Connesso
Stato:        Lettura elenco cartelle...
Comando:        PWD
Risposta:        257 "/" is your current location
Comando:        TYPE I
Risposta:        200 TYPE is now 8-bit binary
Comando:        PASV
Errore:        Disconnesso dal server: ECONNABORTED - Connection aborted
Errore:        Non stato possibile leggere il contenuto della cartella

also if i do: ls -l /var/www/clients
output is:
totale 28
drwxr-xr-x 3 root root 4096 29 mar 18:04 client1
drwxr-xr-x 3 root root 4096 28 mar 17:07 client13
drwxr-xr-x 3 root root 4096 28 mar 22:58 client16
drwxr-xr-x 3 root root 4096 29 mar 15:10 client2
drwxr-xr-x 3 root root 4096 29 mar 16:45 client3
drwxr-xr-x 3 root root 4096 28 mar 22:59 client4
drwxr-xr-x 3 root root 4096 28 mar 23:00 client5

veneficus 30th March 2012 15:49

ok meantime i tried to reinstall pure-ftpd and ispconfig 3.

all seems to go ok but when it tries to start services i have:

Avvio di pure-ftpd: 421 Unknown authentication method: mysql:/etc/pure-ftpd/pureftpd-mysql.conf
[FALLITO]


ok i am getting insane, hoope someone can have a solution.

veneficus 30th March 2012 22:30

Quote:

Originally Posted by veneficus (Post 276495)
ok meantime i tried to reinstall pure-ftpd and ispconfig 3.

all seems to go ok but when it tries to start services i have:

Avvio di pure-ftpd: 421 Unknown authentication method: mysql:/etc/pure-ftpd/pureftpd-mysql.conf
[FALLITO]


ok i am getting insane, hoope someone can have a solution.

fixed by own i did
Code:

yum remove pure-ftpd
then:
Code:

rm -rf /usr/share/doc/pure-ftpd-1.0.29

still can't have direcotry listening

falko 31st March 2012 11:44

Is this a physical server or a virtual machine? If the latter, do you use OpenVZ?

What's the output of
Code:

getenforce
?

veneficus 31st March 2012 12:52

This is a phsical server, no i don,t use any virtualization

falko 1st April 2012 21:07

What's the output of
Code:

getenforce
?

veneficus 1st April 2012 21:22

already tried.

output is : Disalbledd


All times are GMT +2. The time now is 06:45.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.