HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Server Operation (http://www.howtoforge.com/forums/forumdisplay.php?f=5)
-   -   Postfix not receiving emails from outside (http://www.howtoforge.com/forums/showthread.php?t=55569)

Nobuntu 29th December 2011 08:56

Postfix not receiving emails from outside
 
Good day. I reinstalled my server and I included postfix as my email. I installed qpopper and to configure I copied my previous postfix configuration file. My problem now is that I can send emails but I cant receive emails from outside.

Below is my postconf -n output :

alias_maps = hash:/etc/aliases
canonical_maps = hash:/etc/postfix/canonical
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
defer_transports =
disable_dns_lookups = no
disable_mime_output_conversion = no
html_directory = /usr/share/doc/packages/postfix/html
inet_interfaces = localhost
inet_protocols = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_command =
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
mydestination = $myhostname, localhost.$mydomain
mydomain = printobyo.hunyani.co.zw
myhostname = printopak.printobyo.hunyani.co.zw
mynetworks_style = subnet
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/packages/postfix/README_FILES
relay_domains = $mydomain, $mydestination
relayhost = 95.5.1.254
relocated_maps = hash:/etc/postfix/relocated
sample_directory = /usr/share/doc/packages/postfix/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_sasl_auth_enable = no
smtp_use_tls = no
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination
smtpd_sasl_auth_enable = no
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_use_tls = no
strict_8bitmime = no
strict_rfc821_envelopes = no
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550
virtual_alias_domains = hash:/etc/postfix/virtual
virtual_alias_maps = hash:/etc/postfix/virtual

Below is my master.cf file:

#
# Postfix master process configuration file. For details on the format
# of the file, see the Postfix master(5) manual page.
#
# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - n - - smtpd
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
#tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - n - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - n - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#localhost:10025 inet n - n - - smtpd -o content_filter=
scache unix - - n - 1 scache
#
# ================================================== ==================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#



# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ================================================== ==================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus unix - n n - - pipe
user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
procmail unix - n n - - pipe
flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
# dfilt unix - n n - - pipe
# flags=Rq user=filter argv=/etc/postfix/disclaimer -f ${sender} -- ${recipient}

falko 30th December 2011 18:34

Are there any errors in your mail log (in the /var/log/ directory)?

Does your domain's MX record point to the correct server?

White 1st January 2012 23:09

daft question have you set your router up to allow email to ports 25 and 10025


All times are GMT +2. The time now is 10:16.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.