HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   Ubuntu 6.06 installation error (http://www.howtoforge.com/forums/showthread.php?t=5344)

jacobhenry 4th July 2006 23:50

Ubuntu 6.06 installation error
 
I have followed the Ubuntu 6.06 perfect setup without any problem but when I try to install ISPConfig I get this error:

Code:

RC4_CHUNK is undefined
sh: make: command not found
./compile: line 116: make: command not found
ERROR: Could not make OpenSSL
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Any suggestions?

jacobhenry 5th July 2006 19:45

I had a problem with these steps.

Code:

mkdir /etc/postfix/ssl
cd /etc/postfix/ssl/
openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
chmod 600 smtpd.key
openssl req -new -key smtpd.key -out smtpd.csr
openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt
openssl rsa -in smtpd.key -out smtpd.key.unencrypted
mv -f smtpd.key.unencrypted smtpd.key
openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650

when I ran:
Code:

openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
it asked me for the smtp.key and I just used my password except it returned an error.

I hope this information can help you help me.

CombatGod 6th July 2006 07:57

This is just a shot in the dark since I haven't even had a chance to really take a look at the Ubuntu 6.06 install. I'm currently using Breezy Badger and have not yet upgraded but it seems like openssl isn't properly installed.

I would try:

Code:

$sudo apt-get remove openssl
$sudo apt-get install openssl


falko 6th July 2006 11:18

Quote:

Originally Posted by jacobhenry
Code:

sh: make: command not found
./compile: line 116: make: command not found

Any suggestions?

You must install make:
Code:

apt-get install make

lieumorrison 8th July 2006 03:18

I am using the "The Perfect Setup - Ubuntu 6.06 LTS Server" instructions, with a fresh Xubuntu 6.06 install. I get his error far into the compiling...

Code:

[...]
cp -f clamassassin /home/admispconfig/ispconfig/tools/clamav/bin
chmod 555 /home/admispconfig/ispconfig/tools/clamav/bin/clamassassin
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system]

NOTE: settings for "make test" are now controlled using "t/config.dist".
See that file if you wish to customise what tests are run, and how.

checking module dependencies and their versions...

***************************************************************************
ERROR: the required Digest::SHA1 module is not installed.

  The Digest::SHA1 module is used as a cryptographic hash for some
  tests and the Bayes subsystem.  It is also used by Razor2.


***************************************************************************
ERROR: the required HTML::Parser (version 3.24) module is not installed.

  Version 3.31 or later is recommended.

  HTML is used for an ever-increasing amount of email so this dependency
  is unavoidable.  Run "perldoc -q html" for additional information.


***************************************************************************
NOTE: the optional Net::DNS (version 0.34) module is not installed.

  Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
  perform MX checks, and is also used when manually reporting spam to
  SpamCop.  Recommended.

  If this is installed and you are using network tests of any variety
  (which is the default), then you need to make sure the Net::DNS
  version is sufficiently up-to-date:

  - version 0.34 or higher on Unix systems
  - version 0.46 or higher on Windows systems


***************************************************************************
NOTE: the optional Mail::SPF::Query module is not installed.

  Used to check DNS Sender Policy Framework (SPF) records to fight email
  address forgery and make it easier to identify spams.


***************************************************************************
NOTE: the optional IP::Country module is not installed.

  Used by the RelayCountry plugin (not enabled by default) to determine
  the domain country codes of each relay in the path of an email.


***************************************************************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

  Used to check message signatures against Vipul's Razor collaborative
  filtering network. Razor has a large number of dependencies on CPAN
  modules. Feel free to skip installing it, if this makes you nervous;
  SpamAssassin will still work well without it.

  More info on installing and using Razor can be found
  at http://wiki.apache.org/spamassassin/InstallingRazor .


***************************************************************************
NOTE: the optional Net::Ident module is not installed.

  If you plan to use the --auth-ident option to spamd, you will need
  to install this module.


***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.

  This is required if the first nameserver listed in your IP
  configuration or /etc/resolv.conf file is available only via
  an IPv6 address.


***************************************************************************
NOTE: the optional IO::Socket::SSL module is not installed.

  If you wish to use SSL encryption to communicate between spamc and
  spamd (the --ssl option to spamd), you need to install this
  module. (You will need the OpenSSL libraries and use the
  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
  compatibile spamc.)


***************************************************************************
NOTE: the optional LWP::UserAgent module is not installed.

  The "sa-update" script requires this module to make HTTP requests.


***************************************************************************
NOTE: the optional HTTP::Date module is not installed.

  The "sa-update" script requires this module to make HTTP
  If-Modified-Since GET requests.


***************************************************************************
NOTE: the optional Archive::Tar module is not installed.

  The "sa-update" script requires this module to access tar update
  archive files.


***************************************************************************
NOTE: the optional IO::Zlib module is not installed.

  The "sa-update" script requires this module to access compressed
  update archive files.

REQUIRED module missing: Digest::SHA1
REQUIRED module missing: HTML::Parser
optional module missing: Net::DNS
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Archive::Tar
optional module missing: IO::Zlib

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Suggestions? This is my third attempt.

till 8th July 2006 12:01

Did you install these perl modules:

apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl

as described in the howto on this page in step 17:

http://www.howtoforge.com/perfect_setup_ubuntu_6.06_p7


All times are GMT +2. The time now is 23:04.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.