HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   General (http://www.howtoforge.com/forums/forumdisplay.php?f=25)
-   -   ISPConfig 3 w/ ProFTPd (http://www.howtoforge.com/forums/showthread.php?t=51811)

plmcomputerservices 9th March 2011 15:02

ISPConfig 3 w/ ProFTPd
 
Ubuntu 10.04 LTS server edition running on a freshly rebuilt Linode.

I have a fresh install of ISPconfig 3 and everything is working properly except for the FTP side of things.

I installed ProFTPd after the install of ISPConfig 3 and created FTP users using ISPConfig 3. It sees the the FTP server is up and running but the user creation doesn't seem to allow access to my server. :mad:

My errors in the ProFTPd log say:

Mar 09 13:46:01 vps.palmettocomputerservices.com proftpd[3841] li210-220.members.linode.com (::ffff:70.89.81.253[::ffff:70.89.81.253]): USER kitkit: no such user found from ::ffff:70.89.81.253 [::ffff:70.89.81.253] to ::ffff:173.255.200.220:21
Mar 09 13:46:01 vps.palmettocomputerservices.com proftpd[3841] li210-220.members.linode.com (::ffff:70.89.81.253[::ffff:70.89.81.253]): FTP session closed.

kitkit- the name of my user (I think... 'Client Name'+'Username I made'

vps.palmettocomputerservices.com- this should be the name of my domain

li210-220.members.linode.com- this is possibly the name of my domain listed somewhere and shouldn't be (at least not to my knowledge)

70.89.81.253- this is the IP address I am trying to access the server via Filezilla

173.255.200.220:21- this is the IP of my server


This is my ProFTPd.conf file... I changed the user and group to root/root and I changed the name of the server to be descriptive of my VPS... Is that right?

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "Palmetto Computer Services VPS"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/

#instructed to do so from http://www.howtoforge.com/perfect-se...ispconfig-2-p6
ServerIdent on "FTP Server ready."

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User root
Group root

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?pag...LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>



Thank you for any help!!!

falko 10th March 2011 14:26

ISPConfig 3 does not support ProFTPd; you must use PureFTPd. Take a look at this guide: http://www.howtoforge.com/perfect-se...nx-ispconfig-3


All times are GMT +2. The time now is 02:34.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.