HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=27)
-   -   How can I require SSL in ISPConfig 3/Ubuntu 9.10 perfect setup? (http://www.howtoforge.com/forums/showthread.php?t=43608)

gr33d 22nd February 2010 22:00

How can I require SSL in ISPConfig 3/Ubuntu 9.10 perfect setup?
 
just finished the ubuntu 9.10 perfect setup with ispconfig 3. basic, unencrypted e-mail works as expected. is it possible to require ssl and secure smtp only for pop3? ports 995 and 465, respectively.

i would like the m$ outlook 2007 wizard to auto-configure on the first attempt. i think this attempt uses the above mentioned ports.

thanks in advance!

gr33d 23rd February 2010 03:45

i just realized the tutorial mentioned tls is supported. is it not setup by default? outlook can't even configure the encrypted connection.

/etc/postfix/main.cf:
Code:

smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no
append_dot_mydomain = no
readme_directory = /usr/share/doc/postfix
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
smtpd_use_tls = yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
myhostname = server6.mydomain.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = server6.mydomain.com, localhost, localhost.localdomain
relayhost =
mynetworks = 127.0.0.0/8 [::1]/128
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
html_directory = /usr/share/doc/postfix/html
virtual_alias_domains =
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
virtual_mailbox_base = /var/vmail
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
smtpd_sasl_auth_enable = yes
broken_sasl_auth_clients = yes
smtpd_sasl_authenticated_header = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
smtpd_tls_security_level = may
transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
virtual_create_maildirsize = yes
virtual_maildir_extended = yes
virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
virtual_mailbox_limit_override = yes
virtual_maildir_limit_message = "The user you are trying to reach is over quota."
virtual_overquota_bounce = yes
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
maildrop_destination_concurrency_limit = 1
maildrop_destination_recipient_limit = 1
virtual_transport = maildrop
header_checks = regexp:/etc/postfix/header_checks
mime_header_checks = regexp:/etc/postfix/mime_header_checks
nested_header_checks = regexp:/etc/postfix/nested_header_checks
body_checks = regexp:/etc/postfix/body_checks
content_filter = amavis:[127.0.0.1]:10024
receive_override_options = no_address_mappings
message_size_limit = 0

/etc/postfix/sasl/smtpd.conf:
Code:

pwcheck_method: saslauthd
mech_list: plain login
allow_plaintext: true
auxprop_plugin: mysql
sql_hostnames: 127.0.0.1
sql_user: ispconfig
sql_passwd: mysqlrootpassword
sql_database: dbispconfig
sql_select: select password from mail_user where email = '%u'


till 23rd February 2010 09:19

Please look into the postfix master.cf and check if the tls line is commented out or not.

gr33d 23rd February 2010 12:38

there are some smtpd_sasl and smtpd_tls lines, but they all look to be commented out. should i uncomment all of them? the postfix documentation is huge--what section(s) should i visit to figure out which items i need to uncomment/add/remove?

/etc/postfix/master.cf
Code:

#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#              (yes)  (yes)  (yes)  (never) (100)
# ==========================================================================
smtp      inet  n      -      -      -      -      smtpd
#submission inet n      -      -      -      -      smtpd
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps    inet  n      -      -      -      -      smtpd
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628      inet  n      -      -      -      -      qmqpd
pickup    fifo  n      -      -      60      1      pickup
cleanup  unix  n      -      -      -      0      cleanup
qmgr      fifo  n      -      n      300    1      qmgr
#qmgr    fifo  n      -      -      300    1      oqmgr
tlsmgr    unix  -      -      -      1000?  1      tlsmgr
rewrite  unix  -      -      -      -      -      trivial-rewrite
bounce    unix  -      -      -      -      0      bounce
defer    unix  -      -      -      -      0      bounce
trace    unix  -      -      -      -      0      bounce
verify    unix  -      -      -      -      1      verify
flush    unix  n      -      -      1000?  0      flush
proxymap  unix  -      -      n      -      -      proxymap
proxywrite unix -      -      n      -      1      proxymap
smtp      unix  -      -      -      -      -      smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay    unix  -      -      -      -      -      smtp
        -o smtp_fallback_relay=
#      -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq    unix  n      -      -      -      -      showq
error    unix  -      -      -      -      -      error
retry    unix  -      -      -      -      -      error
discard  unix  -      -      -      -      -      discard
local    unix  -      n      n      -      -      local
virtual  unix  -      n      n      -      -      virtual
lmtp      unix  -      -      -      -      -      lmtp
anvil    unix  -      -      -      -      1      anvil
scache    unix  -      -      -      -      1      scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -      n      n      -      -      pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient
} ${user} ${nexthop} ${sender}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -      n      n      -      -      pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -      n      n      -      -      pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp    unix  -      n      n      -      -      pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix  -      n      n      -      2      pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop}
${user} ${extension}
mailman  unix  -      n      n      -      -      pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}


amavis unix - - - - 2 smtp
        -o smtp_data_done_timeout=1200
        -o smtp_send_xforward_command=yes

127.0.0.1:10025 inet n - - - - smtpd
        -o content_filter=
        -o local_recipient_maps=
        -o relay_recipient_maps=
        -o smtpd_restriction_classes=
        -o smtpd_client_restrictions=
        -o smtpd_helo_restrictions=
        -o smtpd_sender_restrictions=
        -o smtpd_recipient_restrictions=permit_mynetworks,reject
        -o mynetworks=127.0.0.0/8
        -o strict_rfc821_envelopes=yes
        -o receive_override_options=no_unknown_recipient_checks,no_header_body_c
hecks
        -o smtpd_bind_address=127.0.0.1


till 23rd February 2010 12:42

TLS is already activated. Please be aware that smtps and tls are two different things. If you want to use smtps too, remove the # in front of the lines:

#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
# -o milter_macro_daemon_name=ORIGINATING

gr33d 23rd February 2010 12:53

i did that, restarted saslauthd and postfix. no luck

can i tell which ports on which outlook is attempting connection?

/var/log/mail.log is telling me:
Code:

Feb 23 06:50:47 server6 imapd-ssl: Disconnected, ip=[::ffff:my.ip.address], time=0, starttls=1
Feb 23 06:50:47 server6 imapd-ssl: Unexpected SSL connection shutdown.


till 23rd February 2010 12:55

The lines that you posted are for imap and not smtp. But qur questions above were about smtp (postfix). I guess you can see the ports in the outlook account settings, I dont use outlook.

gr33d 23rd February 2010 13:44

i suppose i can configure whatever ports i want in whatever client im using...i just need to know which ports. which mail client do you recommend?

nmap localhost tells me pop3s and smtps are listening...maybe my configuration is wrong.

nmap localhost
Code:

PORT      STATE SERVICE
21/tcp    open  ftp
22/tcp    open  ssh
25/tcp    open  smtp
53/tcp    open  domain
80/tcp    open  http
110/tcp  open  pop3
143/tcp  open  imap
443/tcp  open  https
465/tcp  open  smtps
993/tcp  open  imaps
995/tcp  open  pop3s
3306/tcp  open  mysql
8080/tcp  open  http-proxy
10024/tcp open  unknown
10025/tcp open  unknown


gr33d 23rd February 2010 17:21

can i test that pop3s is running on 995 and smtps on 465 without an email client? telnet localhost 995/465 just produces errors.

falko 24th February 2010 14:00

What's the output of
Code:

netstat -tap
?


All times are GMT +2. The time now is 11:44.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.