HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=4)
-   -   Sendmail to local domain ignoring MX records (http://www.howtoforge.com/forums/showthread.php?t=42696)

FractalizeR 14th January 2010 21:10

Sendmail to local domain ignoring MX records
 
Hello.

I have the exact problem, like in this post: http://serverfault.com/questions/250...ing-mx-records I am also using email provider like GMail For Your Domain (which stores your mail and manages it). I am sending mail from my server directly, but receiving mail is done via Yandex (email provider). Since the server hosts forum, I prefer to send mail directly from it because using another mail provider can slow things. Also, when I send 300.000 emails to my subscribers, email provider will surely block me thinking I send spam.

My DNS zone now is:

Code:

    ;
    ; GSMFORUM.RU
    ;
   
    $TTL 1H
   
    gsmforum.ru. SOA ns1.hc.ru. support.hc.ru. (
                  2009122268 ; Serial
                  1H        ; Refresh
                  30M        ; Retry
                  1W        ; Expire
                  1H      ) ; Minimum
                 
    gsmforum.ru.          NS      ns1.hc.ru.
    gsmforum.ru.          NS      ns2.hc.ru.
    @                    A      79.174.68.223
    *.gsmforum.ru.        CNAME  @
    ns1                  A      79.174.68.223
    ns2                  A      79.174.68.224
    @                    MX      10 mx.yandex.ru.
    mail                  CNAME  domain.mail.yandex.net.
    yamail-xxxxxxxxx      CNAME  mail.yandex.ru.


Server hostname is server.gsmforum.ru. May be this is the cause? Can someone explain the reason of the matter (the rules that make sendmail consider domain to be local)? Can I easily change
Code:

    *.gsmforum.ru.        CNAME  @
into

Code:

    *.gsmforum.ru.        A  79.174.68.224
to solve this problem?
Code:

    [root@server ~]# cat /etc/mail/local-host-names
    localhost
    localhost.localdomain

This server hosts gsmforum.ru so I cannot put it into another domain like David Mackintosh suggests. Putting domain in mailertable doesn't solve the problem also. sendmail -bt still shows, that address is local. DontProbeInterfaces is also set to true at sendmail config.

M4 file follows:

Code:

    divert(-1)dnl
    dnl #
    dnl # This is the sendmail macro config file for m4. If you make changes to
    dnl # /etc/mail/sendmail.mc, you will need to regenerate the
    dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is
    dnl # installed and then performing a
    dnl #
    dnl #    make -C /etc/mail
    dnl #
    include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
    VERSIONID(`setup for linux')dnl
    OSTYPE(`linux')dnl
    dnl #
    dnl # Do not advertize sendmail version.
    dnl #
    dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl
    dnl #
    dnl # default logging level is 9, you might want to set it higher to
    dnl # debug the configuration
    dnl #
    dnl define(`confLOG_LEVEL', `9')dnl
    dnl #
    dnl # Uncomment and edit the following line if your outgoing mail needs to
    dnl # be sent out through an external mail server:
    dnl #
    dnl define(`SMART_HOST', `smtp.your.provider')dnl
    dnl #
    define(`confDEF_USER_ID', ``8:12'')dnl
    dnl define(`confAUTO_REBUILD')dnl
    define(`confTO_CONNECT', `1m')dnl
    define(`confTRY_NULL_MX_LIST', `True')dnl
    define(`confDONT_PROBE_INTERFACES',`True')
    define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl
    define(`ALIAS_FILE', `/etc/aliases')dnl
    define(`STATUS_FILE', `/var/log/mail/statistics')dnl
    define(`UUCP_MAILER_MAX', `2000000')dnl
    define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl
    define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
    define(`confAUTH_OPTIONS', `A')dnl
    dnl #
    dnl # The following allows relaying if the user authenticates, and disallows
    dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links
    dnl #
    dnl define(`confAUTH_OPTIONS', `A p')dnl
    dnl #
    dnl # PLAIN is the preferred plaintext authentication method and used by
    dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do
    dnl # use LOGIN. Other mechanisms should be used if the connection is not
    dnl # guaranteed secure.
    dnl # Please remember that saslauthd needs to be running for AUTH.
    dnl #
    dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
    dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
    dnl #
    dnl # Rudimentary information on creating certificates for sendmail TLS:
    dnl #    cd /usr/share/ssl/certs; make sendmail.pem
    dnl # Complete usage:
    dnl #    make -C /usr/share/ssl/certs usage
    dnl #
    dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl
    dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl
    dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl
    dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl
    dnl #
    dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's
    dnl # slapd, which requires the file to be readble by group ldap
    dnl #
    dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl
    dnl #
    dnl define(`confTO_QUEUEWARN', `4h')dnl
    dnl define(`confTO_QUEUERETURN', `5d')dnl
    dnl define(`confQUEUE_LA', `12')dnl
    dnl define(`confREFUSE_LA', `18')dnl
    define(`confTO_IDENT', `0')dnl
    dnl FEATURE(delay_checks)dnl
    FEATURE(`no_default_msa', `dnl')dnl
    FEATURE(`smrsh', `/usr/sbin/smrsh')dnl
    FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl
    FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl
    FEATURE(redirect)dnl
    FEATURE(always_add_domain)dnl
    FEATURE(use_cw_file)dnl
    FEATURE(use_ct_file)dnl
    dnl #
    dnl # The following limits the number of processes sendmail can fork to accept
    dnl # incoming messages or process its message queues to 20.) sendmail refuses
    dnl # to accept connections once it has reached its quota of child processes.
    dnl #
    dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl
    dnl #
    dnl # Limits the number of new connections per second. This caps the overhead
    dnl # incurred due to forking new sendmail processes. May be useful against
    dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address
    dnl # limit would be useful but is not available as an option at this writing.)
    dnl #
    dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl
    dnl #
    dnl # The -t option will retry delivery if e.g. the user runs over his quota.
    dnl #
    FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl
    FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl
    FEATURE(`blacklist_recipients')dnl
    EXPOSED_USER(`root')dnl
    dnl #
    dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment
    dnl # the following 2 definitions and activate below in the MAILER section the
    dnl # cyrusv2 mailer.
    dnl #
    dnl define(`confLOCAL_MAILER', `cyrusv2')dnl
    dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl
    dnl #
    dnl # The following causes sendmail to only listen on the IPv4 loopback address
    dnl # 127.0.0.1 and not on any other network devices. Remove the loopback
    dnl # address restriction to accept email from the internet or intranet.
    dnl #
    DAEMON_OPTIONS(`Name=MTA,Port=smtp')
    dnl #
    dnl # The following causes sendmail to additionally listen to port 587 for
    dnl # mail from MUAs that authenticate. Roaming users who can't reach their
    dnl # preferred sendmail daemon due to port 25 being blocked or redirected find
    dnl # this useful.
    dnl #
    dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl
    dnl #
    dnl # The following causes sendmail to additionally listen to port 465, but
    dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed
    dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't
    dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS
    dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps
    dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1.
    dnl #
    dnl # For this to work your OpenSSL certificates must be configured.
    dnl #
    dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl
    dnl #
    dnl # The following causes sendmail to additionally listen on the IPv6 loopback
    dnl # device. Remove the loopback address restriction listen to the network.
    dnl #
    dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl
    dnl #
    dnl # enable both ipv6 and ipv4 in sendmail:
    dnl #
    dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6')
    dnl #
    dnl # We strongly recommend not accepting unresolvable domains if you want to
    dnl # protect yourself from spam. However, the laptop and users on computers
    dnl # that do not have 24x7 DNS do need this.
    dnl #
    FEATURE(`accept_unresolvable_domains')dnl
    dnl #
    dnl FEATURE(`relay_based_on_MX')dnl
    dnl #
    dnl # Also accept email sent to "localhost.localdomain" as local email.
    dnl #
    LOCAL_DOMAIN(`localhost.localdomain')dnl
    dnl #
    dnl # The following example makes mail from this host and any additional
    dnl # specified domains appear to be sent from mydomain.com
    dnl #
    dnl MASQUERADE_AS(`mydomain.com')dnl
    dnl #
    dnl # masquerade not just the headers, but the envelope as well
    dnl #
    dnl FEATURE(masquerade_envelope)dnl
    dnl #
    dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well
    dnl #
    dnl FEATURE(masquerade_entire_domain)dnl
    dnl #
    dnl MASQUERADE_DOMAIN(localhost)dnl
    dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
    dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl
    dnl MASQUERADE_DOMAIN(mydomain.lan)dnl
    MAILER(smtp)dnl
    MAILER(procmail)dnl
    dnl MAILER(cyrusv2)dnl
    FEATURE(`dnsbl',`zen.spamhaus.org',`Rejected - your IP is blacklisted by http://www.spamhaus.org')


topdog 18th January 2010 15:10

U can add the domain_name to /etc/mail/local-host-names and add an entry in /etc/hosts

FractalizeR 19th January 2010 10:25

What I am trying to do, is to make sendmail to send all outgoing mail to the server registered as MX for this domain. What good will adding to /etc/hosts and to local-host-names do?

topdog 19th January 2010 10:42

In that case then why do u want to change anything, send mail will lookup the MX record and deliver the mail to that host

FractalizeR 19th January 2010 11:33

Please read my question. sendmail detects MX domain is local. That is the problem.

Flash 20th January 2010 12:40

You did not post what mail address you are trying to send to... you did not post a snip of your log files where you see it happening.

you should actually provide the things above.

FEATURE(always_add_domain)dnl

maybe you should disable that aswell, Im not really into sendmail, but that might cause your mail addresses to go user@somedomain.com@localhost

FractalizeR 20th January 2010 13:17

It is discussed at the link I gave. Anyway, I managed to solve the problem by putting local domain to the list of relayed and setting up redirection in /etc/mailertable


All times are GMT +2. The time now is 06:30.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.