HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   Error compilation ISPConfig 2.2.34? (http://www.howtoforge.com/forums/showthread.php?t=41325)

severnet 25th November 2009 01:14

Error compilation ISPConfig 2.2.34?
 
I've tried several attempts to install ISPConfig by the manual, but at the end of it observe the following error log:

Quote:

others.h: In function ‘cli_getpagesize’:
others.h:363: error: ‘_SC_PAGESIZE’ undeclared (first use in this function)
others.h:363: error: (Each undeclared identifier is reported only once
others.h:363: error: for each function it appears in.)
make[4]: *** [libclamav_la-matcher-bm.lo] Error 1
make[4]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.95.3/libclamav'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.95.3/libclamav'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.95.3/libclamav'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.95.3'
make: *** [all] Error 2
ERROR: Could not make ClamAV
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory
Please enter your MySQL server:localhost
OK
Please enter your MySQL user:root
Please enter your MySQL password:
OK
Please enter a name for the ISPConfig database (e.g. db_ispconfig):db_ispconfig
Please enter the IP address of the ISPConfig web (e.g. 192.168.0.1):192.168.1.10
OK
Please enter the host name (e.g. www):www
Please enter the domain (e.g. xyz.de):***************
OK
Please select the protocol (http or https (SSL encryption)) to use to access the ISPConfig system:
1) HTTPS
2) HTTP
Your Choice: 2

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
Restarting some services...
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Shutting down postfix: [ OK ]
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Starting postfix: [ OK ]
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Shutting down proftpd: [ OK ]
Starting proftpd: [ OK ]
./setup2: line 1163: /etc/rc.d/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://www.**************:81

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /tmp/install_ispconfig/compile_aps/../..: No such file or directory
May be something wrong in the ISPConfig 2.2.34 version or adjust the user manual? :confused:

OS: Fedora 10 Perfect Server
ISPConfig: 2.2.34

till 25th November 2009 14:31

Quote:

May be something wrong in the ISPConfig 2.2.34 version or adjust the user manual?
Neither nor.

There is a bug in clamav that prevents the compilation of clamav in fedora versions < 11. Some clamav developers released a patch for clamav and we will integrate it in the next ispconfig release which will be available in a few days.

severnet 26th November 2009 14:09

Okay, thx! :rolleyes:

severnet 26th November 2009 22:12

I've installed 2.2.35 (big thx for the new version, Dev.Team!). Everything is okay exept POP3-server. The status of service is offline. Tried to restart it manually, but:

Quote:

# fetchmail restart
fetchmail: WARNING: Running as root is discouraged.
Enter password for root@restart:
fetchmail: connection to restart:imap [88.201.201.116/143] failed: Connection timed out.
IMAP connection to restart failed: Connection timed out
fetchmail: connection to restart:pop3 [88.201.201.116/110] failed: Connection timed out.
POP3 connection to restart failed: Connection timed out
fetchmail: Query status=2 (SOCKET)

p.s. one wish.. 'd like to use ISPConfig in russian, but now i see unexpected characters. Try to fix language encoding in to utf8. Thank you in advance!

falko 27th November 2009 18:39

Have you tried to reboot the system?

severnet 20th December 2009 17:43

Quote:

Originally Posted by falko (Post 212145)
Have you tried to reboot the system?

Thx, falko! It's working!


All times are GMT +2. The time now is 23:13.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.