HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   ISPConfig install error: The PHP binary coming with ISPConfig does not work... (http://www.howtoforge.com/forums/showthread.php?t=3735)

mlanglois 15th April 2006 19:00

ISPConfig install error: The PHP binary coming with ISPConfig does not work...
 
Hi!
I have been a faithful user of ISPConfig for months -- it's just GREAT!
However I have a problem when upgrading to the new version: the setup stopped after a few minutes with this error message:
Code:

./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
The server runs SuSE 10, which I installed by faithfully following the "perfect setup" howto (I only had to change the ISPConfig 2.1.2 setup because of my x86_64 system).

I've read that I'm not the only one having this error, but I haven't found the solution. I've tried to run the setup a second time, but now it's asking me more questions, as though it were a new install and not an upgrade... And the same error shows up anyway!

Here are the last lines of the setup:
Code:

Configuring extensions
checking whether to enable LIBXML support... no
checking libxml2 install dir... no
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for pkg-config... no
configure: error: Cannot find OpenSSL's libraries
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Can anyone help?
Thanks!!

falko 16th April 2006 15:21

Quote:

configure: error: Cannot find OpenSSL's libraries
That's the problem. Did you somehow remove OpenSSL or parts of it?
What's the ouput of
Code:

uname -m
?

mlanglois 16th April 2006 18:53

uname -m ==> x86_64

When I first installed ISPConfig (v. 2.1.2) on my x86_64 system, I had to remove the --with-openssl parameter in compile_aps/compile on l. 85. But I thought that this new version was compatible with x86_64?

yast2 tells me that openssl, openssl-32bit, openssl-devel, and php5-openssl are installed.

mlanglois 16th April 2006 19:15

I checked the Perfect ISP Server SuSE Howto, and I noticed that openssl-devel-32bit should be installed. It was not installed on my system (which I can't explain), but anyway I installed it and then ISPConfig installed just fine :D :D !!

I was also VERY pleased to see that ISPConfig kept my configuration although I screwed the first upgrade attempt...

Anyway, once again a huge THANKS to you guys!!! :p

zoddo 27th April 2006 08:35

i have the same sort of problem. uname -m = i686
Code:

checking for MySQL support... yes
checking for specified location of the MySQL UNIX socket... no
checking for MySQL UNIX socket location... no
configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories
: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your syste              m! The installation routine stops here!


till 27th April 2006 09:53

Quote:

Originally Posted by zoddo
i have the same sort of problem. uname -m = i686
Code:

configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!


The mysql development files are missing. Install the "mysql-dev" package from your linux distribution. Then unpack the ISPConfig tar.gz again and run the setup script.

zoddo 27th April 2006 13:58

i cant seem to find it on my install cd...

falko 27th April 2006 16:32

Which distribution are you using?

taylan 12th July 2006 16:08

insallation problem
 
I am using Centos 4.3 and i followed perfect setup for centos 4.3

i ended up with this error i tried twice can you help me pls during the installation zlib installation gave error the other steps was ok
thanks
to'
> make: *** [build_crypto] Error 1
> ERROR: Could not make OpenSSL
> cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
> mv: cannot stat `binaries/aps.tar.gz': No such file or directory
> mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 6: syntax error: unexpected end of file
-bash: make[1]:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
> mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
> mv: cannot stat `binaries/cronolog': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/cronosplit': No such file or directory
> mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
> mv: cannot stat `binaries/zip': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/unzip': No such file or directory
> tar: spamassassin.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `spamassassin': No such file or directory
> tar: uudeview.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `uudeview': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 7: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# tar: clamav.tar.gz: Cannot open: No such file or directory
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error is not recoverable: exiting now
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Child returned status 2
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error exit delayed from previous errors
-bash: tar:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `clamav': No such file or directory
> tar: aps.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
> ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
>

falko 13th July 2006 14:56

Quote:

Originally Posted by taylan
> make: *** [build_crypto] Error 1
> ERROR: Could not make OpenSSL
> cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory

There must have been another error before this. Please post it.


All times are GMT +2. The time now is 10:10.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.