HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Suggest HOWTO (http://www.howtoforge.com/forums/forumdisplay.php?f=9)
-   -   Virusscanning on samba shares? (http://www.howtoforge.com/forums/showthread.php?t=3706)

HoUsECAt 14th April 2006 11:03

Virusscanning on samba shares?
 
Perhaps add a possibilty to add virusscan the samba shares to the tutorial from Small Business Samba Server on Ubuntu?

sbovisjb1 14th April 2006 20:18

Its already been done
 
http://ubuntuguide.org/#installclamav

HoUsECAt 3rd May 2006 09:59

is it also possible to configure an instant virus-scanner? instead of a cron-job?

thctlo 3rd June 2006 16:03

on access virus scanner and recyle bin for samba.
 
Quote:

Originally Posted by HoUsECAt
is it also possible to configure an instant virus-scanner? instead of a cron-job?

yes this is possible,

check out this link
this is my work, its not perfect, but you get far with this.
/snap

8.0 On-Access virus scanning on samba (samba-clamav)
8.1 Installing ClamAV

apt-get install clamav arj unzoo lha clamav-freshclam clamav-daemon
Configuring clamav-freshclam : Daemon
Choose a close mirror
Should clamd be notified after updates? Yes
8.2 get the sources ( samba & samba-vscan )

mkdir /usr/src/sources
cd /usr/src/sources

apt-get install dpkg-dev
apt-get source samba
apt-get build-dep samba

cd samba-3.0-14a
vi source/include/version.h

here remove the a from the 14 ( 3.0.14a => 3.0.14 )

./debian/rules configure-stamp
cd source
./make proto
cd ../..

wget
http://switch.dl.sourceforge.net/sou...ba-vscan-0.3.6
b.tar.bz2

tar xjvf samba-vscan-0.3.6b.tar.bz2

cd samba-vscan-0.3.6b
./configure
--with-samba-source=/usr/src/sources/samba-3.0.14a/source
make && make install

cp clamav/vscan-clamav.conf /etc/samba/samba-vscan-clamav.conf
change in the samba-vscan-clamav.conf
clamd socket name = /var/run/clamav/clamd.ctl
infected spins action = quarantine ( or delete , which I choose.)

When I put that lines in my smb.conf file, I can't access the share
:
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

An example:
[public]
comment = Public Directory
path = /home/public
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

!!! BEWARE !!!! if samba upgrade to a higer version you MUST
recompile
your samba-vscan. set samba to hold for no upgrade.

echo packagename hold | dpkg --set-selections set to hold
echo packagename install | dpkg --set-selections set to install
9.0 Recycle bin on samba
9.1 Recycle bin configuration

configure samba for using the recycle bin.
I made my manager happy with this.

create a file in /etc/samba
and fill it with the options below.

/etc/samba/samba-recycle.conf

name = .recycle
mode = KEEP_DIRECTORIES|VERSIONS|TOUCH
maxsize = 0
exclude = *.tmp|*.temp|*.o|*.obj|~$*|*.~??|~*.tmp
excludedir = /tmp|/temp|/cache
noversions = *.doc|*.xls|*.ppt

add this to you share, same as vscan.

vfs object = recycle
recycle: config-files = /etc/samba/samba-recycle.conf

create a recycle bin directorie and hide it for the users.

I created .recycle this way ( because of the dot) users don't see
this
IF.. you don't set you explorer to view hidden files.

restart samba and your done.

You are ready to use your samba server.

greets,

Louis

aaron1234nz 16th February 2007 06:15

One more step
 
If you are experiencing problems where your samba shares don't show up when the vfs object is enabled, it is most likely it is because there is one more thing you need to to make it work, which was missed out is this howto.

cp /usr/src/samba-vscan-0.3.6b/vscan-clamav.so /usr/lib/samba/vfs/

invitation 11th March 2009 09:10

Virusscanning on samba shares?
 
is it also possible to configure an instant virus-scanner? instead of a cron-job?

yes this is possible,

check out this link (http://lists.samba.org/archive/samba...er/114817.html)
this is my work, its not perfect, but you get far with this.
/snap

8.0 On-Access virus scanning on samba (samba-clamav)
8.1 Installing ClamAV

apt-get install clamav arj unzoo lha clamav-freshclam clamav-daemon
Configuring clamav-freshclam : Daemon
Choose a close mirror
Should clamd be notified after updates? Yes
8.2 get the sources ( samba & samba-vscan )

mkdir /usr/src/sources
cd /usr/src/sources

apt-get install dpkg-dev
apt-get source samba
apt-get build-dep samba

cd samba-3.0-14a
vi source/include/version.h

here remove the a from the 14 ( 3.0.14a => 3.0.14 )

./debian/rules configure-stamp
cd source
./make proto
cd ../..

wget
http://switch.dl.sourceforge.net/sou...ba-vscan-0.3.6
b.tar.bz2

tar xjvf samba-vscan-0.3.6b.tar.bz2

cd samba-vscan-0.3.6b
./configure
--with-samba-source=/usr/src/sources/samba-3.0.14a/source
make && make install

cp clamav/vscan-clamav.conf /etc/samba/samba-vscan-clamav.conf
change in the samba-vscan-clamav.conf
clamd socket name = /var/run/clamav/clamd.ctl
infected spins action = quarantine ( or delete , which I choose.)

When I put that lines in my smb.conf file, I can't access the share
:
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

An example:
[public]
comment = Public Directory
path = /home/public
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

!!! BEWARE !!!! if samba upgrade to a higer version you MUST
recompile
your samba-vscan. set samba to hold for no upgrade.

echo packagename hold | dpkg --set-selections set to hold
echo packagename install | dpkg --set-selections set to install
9.0 Recycle bin on samba
9.1 Recycle bin configuration

configure samba for using the recycle bin.
I made my manager happy with this.

create a file in /etc/samba
and fill it with the options below.

/etc/samba/samba-recycle.conf

name = .recycle
mode = KEEP_DIRECTORIES|VERSIONS|TOUCH
maxsize = 0
exclude = *.tmp|*.temp|*.o|*.obj|~$*|*.~??|~*.tmp
excludedir = /tmp|/temp|/cache
noversions = *.doc|*.xls|*.ppt

add this to you share, same as vscan.

vfs object = recycle
recycle: config-files = /etc/samba/samba-recycle.conf

create a recycle bin directorie and hide it for the users.

I created .recycle this way ( because of the dot) users don't see
this
IF.. you don't set you explorer to view hidden files.

restart samba and your done.

You are ready to use your samba server.

rockstar9840 6th November 2010 07:04

Hey invitation, you describe the process so clearly and nicely. I easily got it. You really help me a lot.

Thank You :)

jhonhud 25th April 2011 16:56

Hi...Your post really got me thinking man..... an intelligent piece I must say. :)

flyingjohn 7th June 2011 23:29

Quote:

Originally Posted by thctlo (Post 28474)
yes this is possible,

check out this link
this is my work, its not perfect, but you get far with this.
/snap

8.0 On-Access virus scanning on samba (samba-clamav)
8.1 Installing ClamAV

apt-get install clamav arj unzoo lha clamav-freshclam clamav-daemon
Configuring clamav-freshclam : Daemon
Choose a close mirror
Should clamd be notified after updates? Yes
8.2 get the sources ( samba & samba-vscan )

mkdir /usr/src/sources
cd /usr/src/sources

apt-get install dpkg-dev
apt-get source samba
apt-get build-dep samba

cd samba-3.0-14a
vi source/include/version.h

here remove the a from the 14 ( 3.0.14a => 3.0.14 )

./debian/rules configure-stamp
cd source
./make proto
cd ../..

wget
http://switch.dl.sourceforge.net/sou...ba-vscan-0.3.6
b.tar.bz2

tar xjvf samba-vscan-0.3.6b.tar.bz2

cd samba-vscan-0.3.6b
./configure
--with-samba-source=/usr/src/sources/samba-3.0.14a/source
make && make install

cp clamav/vscan-clamav.conf /etc/samba/samba-vscan-clamav.conf
change in the samba-vscan-clamav.conf
clamd socket name = /var/run/clamav/clamd.ctl
infected spins action = quarantine ( or delete , which I choose.)

When I put that lines in my smb.conf file, I can't access the share
:
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

An example:
[public]
comment = Public Directory
path = /home/public
vfs object = vscan-clamav
vscan-clamav: config-file = /etc/samba/samba-vscan-clamav.conf

!!! BEWARE !!!! if samba upgrade to a higer version you MUST
recompile
your samba-vscan. set samba to hold for no upgrade.

echo packagename hold | dpkg --set-selections set to hold
echo packagename install | dpkg --set-selections set to install
9.0 Recycle bin on samba
9.1 Recycle bin configuration arizona seo

configure samba for using the recycle bin.
I made my manager happy with this.

create a file in /etc/samba
and fill it with the options below.

/etc/samba/samba-recycle.conf

name = .recycle
mode = KEEP_DIRECTORIES|VERSIONS|TOUCH
maxsize = 0
exclude = *.tmp|*.temp|*.o|*.obj|~$*|*.~??|~*.tmp
excludedir = /tmp|/temp|/cache
noversions = *.doc|*.xls|*.ppt

add this to you share, same as vscan.

vfs object = recycle
recycle: config-files = /etc/samba/samba-recycle.conf

create a recycle bin directorie and hide it for the users.

I created .recycle this way ( because of the dot) users don't see
this
IF.. you don't set you explorer to view hidden files.

restart samba and your done.

You are ready to use your samba server.

greets,

Louis

nice code above :)


All times are GMT +2. The time now is 01:22.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.