HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   ISPconfig no longer works!!! (http://www.howtoforge.com/forums/showthread.php?t=28708)

banzaiwebstudio.com 15th November 2008 05:16

ISPconfig no longer works!!!
 
I had set it up and was working fine.

My server (without ISPconfig) is www.banzaiwebstudio.com

I also had a testing web site which was www.banzaiwebhosting.com

Both was working fine for over 5 days.

However today something has happened and the ISPconfig just stopped working.

When i access my server on www.banzaiwebstudio.com it appears the "Shared IP page". If I access the www.banzaiwebhosting.com, it also display the "Shared IP page".

my ifconfig file is:

Quote:

eth0 Link encap:Ethernet HWaddr 00:1a:4d:4c:7a:cb
inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21a:4dff:fe4c:7acb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:45381 errors:0 dropped:0 overruns:0 frame:0
TX packets:48883 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8355905 (8.3 MB) TX bytes:21743413 (21.7 MB)
Interrupt:219 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:286046 errors:0 dropped:0 overruns:0 frame:0
TX packets:286046 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14767313 (14.7 MB) TX bytes:14767313 (14.7 MB)


My Vhosts_ispconfig.conf:
Quote:

###################################
#
# ISPConfig vHost Configuration File
# Version 1.0
#
###################################
#
NameVirtualHost 192.168.0.1:80
<VirtualHost 192.168.0.1:80>
ServerName localhost
ServerAdmin root@localhost
DocumentRoot /var/www/sharedip
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</IfModule>
</VirtualHost>
NameVirtualHost 192.168.0.7:80
<VirtualHost 192.168.0.7:80>
ServerName localhost
ServerAdmin root@localhost
DocumentRoot /var/www/sharedip
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</IfModule>
</VirtualHost>
#
#
######################################
# Vhost: www.banzaiwebhosting.com:80
######################################
#
#
<VirtualHost 192.168.0.7:80>
ServerName www.banzaiwebhosting.com:80
ServerAdmin
DocumentRoot /var/www/web3/web
ServerAlias www.banzaiwebhosting.com
DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi in$
Alias /cgi-bin/ /var/www/web3/cgi-bin/
AddHandler cgi-script .cgi
AddHandler cgi-script .pl
ErrorLog /var/www/web3/log/error.log
AddType application/x-httpd-php .php .php3 .php4 .php5
php_admin_flag safe_mode Off
<IfModule mod_ruby.c>
<Directory /var/www/web3/web>
Options +ExecCGI
</Directory>
RubyRequire apache/ruby-run
#RubySafeLevel 0
<Files *.rb>
SetHandler ruby-object
RubyHandler Apache::RubyRun.instance
</Files>
<Files *.rbx>
SetHandler ruby-object
RubyHandler Apache::RubyRun.instance
</Files>
</IfModule>
<IfModule mod_python.c>
<Directory /var/www/web3/web>
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride Indexes AuthConfig Limit FileInfo
Order allow,deny
allow from all
AddHandler mod_python .py
PythonHandler mod_python.publisher
PythonDebug On
</Directory>
</IfModule>
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
Alias /error/ "/var/www/web3/web/error/"
ErrorDocument 400 /error/invalidSyntax.html
ErrorDocument 401 /error/authorizationRequired.html
ErrorDocument 403 /error/forbidden.html
ErrorDocument 404 /error/fileNotFound.html
ErrorDocument 405 /error/methodNotAllowed.html
ErrorDocument 500 /error/internalServerError.html
ErrorDocument 503 /error/overloaded.html
AliasMatch ^/~([^/]+)(/(.*))? /var/www/web3/user/$1/web/$3
AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web3/user/$1/web/$3
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</IfModule>
</VirtualHost>
#
#
#
my ls -la /root/ispconfig/ :
Quote:

total 104
drwxr-xr-x 10 root root 4096 2008-11-15 02:20 .
drwxr-xr-x 3 root root 4096 2008-11-14 13:28 ..
-rwxr-xr-x 1 root root 35990 2008-11-06 23:40 cronolog
-rwxr-xr-x 1 root root 9673 2008-11-06 23:40 cronosplit
drwxr-xr-x 12 root root 4096 2008-11-06 23:32 httpd
drwxr-xr-x 16 root root 4096 2008-11-06 23:40 isp
drwxr-xr-x 7 root root 4096 2008-11-06 23:32 libmcrypt
-rw-r--r-- 1 root root 8 2008-11-15 02:20 .old_path_httpd_root
drwxr-xr-x 6 root root 4096 2008-11-06 23:28 openssl
drwxr-xr-x 6 root root 4096 2008-11-06 23:36 php
drwxr-xr-x 4 root root 4096 2008-11-06 23:40 scripts
drwxr-xr-x 4 root root 4096 2008-11-06 23:40 standard_cgis
drwxr-xr-x 2 root root 4096 2008-11-06 23:40 sv
-rwx------ 1 root root 9389 2008-11-06 23:40 uninstall
my tail /home/admispconfig/ispconfig/ispconfig.log:
Quote:

15.11.2008 - 02:20:11 => INFO - /root/ispconfig/scripts/lib/config.lib.php, Line 2601: . /etc/apache2/envvars && httpd -t &> /dev/null
15.11.2008 - 02:20:11 => INFO - /root/ispconfig/scripts/lib/config.lib.php, Line 2611: httpd syntax ok
15.11.2008 - 02:20:11 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/apache2 reload &> /dev/null
15.11.2008 - 02:20:11 => INFO - /root/ispconfig/scripts/lib/config.lib.php, Line 2067: cp -fr /etc/proftpd_ispconfig.conf /etc/proftpd_ispconfig.conf~
15.11.2008 - 02:20:13 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/proftpd restart &> /dev/null
15.11.2008 - 02:43:48 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/apache2 restart &> /dev/null
15.11.2008 - 02:43:48 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/postfix stop &> /dev/null
15.11.2008 - 02:43:48 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/postfix start &> /dev/null
15.11.2008 - 02:43:50 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/bind9 restart &> /dev/null
15.11.2008 - 02:43:53 => INFO - /root/ispconfig/scripts/lib/classes/ispconfig_system.lib.php, Line 728: /etc/init.d/proftpd restart &> /dev/null
my httpd -t:
Quote:

httpd: bad user name ${APACHE_RUN_USER}



Any help?

falko 15th November 2008 14:52

Is Vhosts_ispconfig.conf included at the end of your main Apache configuration?

Please remove the IP 192.168.0.1 from your ISPConfig configuration because it is not listed in the output of ifconfig.

banzaiwebstudio.com 15th November 2008 15:06

yes it is, i will also includ my apache2.conf:
Quote:

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.lo$
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups On

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwa$
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" $
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combin$
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/pat$
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.

# Alias /error/ "/usr/share/apache2/error/"
#
# <Directory "/usr/share/apache2/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var



# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include /etc/apache2/conf.d/

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

<Directory /var/www/sharedip>
Options +Includes -Indexes
AllowOverride None
AllowOverride Indexes AuthConfig Limit FileInfo
Order allow,deny
Allow from all
<Files ~ "^\.ht">
Deny from all
</Files>
</Directory>

###############ispconfig_log###############
LogFormat "%v||||%b||||%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent$
CustomLog "|/root/ispconfig/cronolog --symlink=/var/log/httpd/ispconfig_access_$

<Directory /var/www/*/web>
Options +Includes -Indexes
AllowOverride None
AllowOverride Indexes AuthConfig Limit FileInfo
Order allow,deny
Allow from all
<Files ~ "^\.ht">
Deny from all
</Files>
</Directory>

<Directory /var/www/*/user/*/web>
Options +Includes -Indexes
AllowOverride None
AllowOverride Indexes AuthConfig Limit FileInfo
Order allow,deny
Allow from all
<Files ~ "^\.ht">
Deny from all
</Files>
</Directory>

<Directory /var/www/*/cgi-bin>
Options ExecCGI -Indexes
AllowOverride None
AllowOverride Indexes AuthConfig Limit FileInfo
Order allow,deny
Allow from all
<Files ~ "^\.ht">
Deny from all
</Files>
</Directory>

Include /etc/apache2/vhosts/Vhosts_ispconfig.conf


banzaiwebstudio.com 15th November 2008 15:43

I found the problem, it was on vhosts_ispconfig.conf

The problem was:
ServerAlias pointing to www.banzaiwebhosting.com

so i changed to:
ServerAlias pointing to banzaiwebhosting.com

However there is a way to do this automatically not manually?

till 15th November 2008 16:37

Nver edit the file vhosts_ispconfig.conf manually, ispconfig will remove your change automatically! You just missed to add a co-domain banzaiwebhosting.com with empty hostname field to the website www.banzaiwebhosting.com

banzaiwebstudio.com 15th November 2008 16:47

OK, thanks for the tip,

i have done exactly what you suggested! and its working!! thanks


All times are GMT +2. The time now is 07:11.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.