HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   I Fail at installing ispconfig where did I go wrong? (http://www.howtoforge.com/forums/showthread.php?t=27501)

stocker741 5th October 2008 23:59
I Fail at installing ispconfig where did I go wrong?
 
Alright what did I do wrong?

Code:
stocker@linux-server/installs$:tar -zxvf I*.*
[...Unpacks...]

stocker@linux-server:~/installs$ cd install_ispconfig/
stocker@linux-server:~/installs/install_ispconfig$ sudo ./setup
[sudo] password for stocker:
Debian lenny/sid.0
./setup2: line 76: export: `/etc/init.d': not a valid identifier
Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau système.
Wählen Sie Ihre Sprache (deutsch/englisch/spanisch/französisch/italienisch/niederländisch/polnisch/schwedisch): / Please choose your language (German/English/Spanish/French/Italian/Dutch/Polish/Swedish):  / Merci de choisir votre langue (Allemand/Anglais/Espagnol/Français/Italien/Néerlandais/Polonais/Suédois):
1) de
2) en
3) es
4) fr
5) it
6) nl
7) pl
8) se
Ihre Wahl: / Your Choice: / Votre Choix:2

With the system installation, some system files are replaced where adjustments were made. This can lead to loss of entries in httpd.conf, named.conf as well as in the Sendmail configuration.

Do you want to continue with the installation? [y/n]y

Please read through the licence carefully:

Copyright (c) 2005, projektfarm GmbH, Till Brehm, Falko Timme
All rights reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright notice,
      this list of conditions and the following disclaimer in the documentation
      and/or other materials provided with the distribution.
    * Neither the name of ISPConfig nor the names of its contributors
      may be used to endorse or promote products derived from this software with
out
      specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIME
D.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
[7m--More--[27m
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Do you accept the licence? [y/n]y

Please select the installation mode. In expert mode you have to answer some additional questions. In standard mode standard values are assumed for these questions.
1) standard
2) expert
Your Choice: 1

########## MAIL SERVER ##########

Checking for MTA...
/usr/sbin/postfix
OK

ISPConfig found the following MTA:
postfix
Is this correct? [y/n]y


########## FTP SERVER ##########

Checking if an FTP server is installed...
/usr/sbin/vsftpd
OK

ISPConfig found the following FTP server:
vsftpd
Is this correct? [y/n]y


########## PROCMAIL ##########

Checking for package procmail...
/usr/bin/procmail
OK

########## QUOTA ##########

Checking for package quota...
/usr/bin/quota
OK

########## MYSQL SERVER ##########

Checking for package MySQL...
/usr/bin/mysql
OK

########## OPENSSL ##########

Checking for package openssl...
/usr/bin/openssl
OK

########## DNS SERVER ##########

Checking for package bind...
/usr/sbin/named
OK

########## IPTABLES/IPCHAINS/IPFW ##########

Checking for program iptables/ipchains/ipfw...
/sbin/iptables
OK

########## WEB SERVER ##########

Checking for program httpd...
/usr/bin/httpd
OK
Checking the syntax of the httpd.conf...
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
Syntax OK
The syntax is ok!

########## gcc ##########

/usr/bin/gcc
OK

########## make ##########

/usr/bin/make
OK

########## lex ##########

/usr/bin/lex
OK

########## g++ ##########

/usr/bin/g++
OK

########## INSTALLATION ##########

[...Bunch of stuff...]
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
IsWindows=0
CC            =gcc
CFLAG        =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DOPENSSL_NO_KRB5 -m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int
EX_LIBS      =-ldl
BN_ASM        =asm/x86_64-gcc.o
DES_ENC      =des_enc.o fcrypt_b.o
BF_ENC        =bf_enc.o
CAST_ENC      =c_enc.o
RC4_ENC      =asm/rc4-x86_64.o
RC5_ENC      =rc5_enc.o
MD5_OBJ_ASM  =
SHA1_OBJ_ASM  =
RMD160_OBJ_ASM=
PROCESSOR    =
RANLIB        =/usr/bin/ranlib
ARFLAGS      =
PERL          =/usr/bin/perl
SIXTY_FOUR_BIT_LONG mode
DES_UNROLL used
DES_INT used
RC4 uses uchar
RC4_CHUNK is unsigned long
BF_PTR2 used
e_os2.h => include/openssl/e_os2.h
[...Makes a bunch of stuff...]
[...Does more Stuff...}
installing libcrypto.a
installing libssl.a
cp openssl.pc /root/ispconfig/openssl/lib/pkgconfig
chmod 644 /root/ispconfig/openssl/lib/pkgconfig/openssl.pc
 + Warning: Your 'echo' command is slightly broken.
 + It interprets escape sequences per default. We already
 + tried 'echo -E' but had no real success. If errors occur
 + please set the SEO variable in 'configure' manually to
 + the required 'echo' options, i.e. those which force your
 + 'echo' to not interpret escape sequences per default.
Configuring [1mmod_ssl/2.8.31[m for [1mApache/1.3.41[m
 + Apache location: ../apache_1.3.41 (Version 1.3.41)
 + OpenSSL location: /root/ispconfig/openssl

 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local)   
 + Applying packages to Apache source tree:
  o Extended API (EAPI)
  o Distribution Documents
  o SSL Module Source
  o SSL Support
  o SSL Configuration Additions
  o SSL Module Documentation
  o Addons
Done: source extension and patches successfully applied.

Configuring for Apache, Version 1.3.41
 + Warning: Your 'echo' command is slightly broken.
 + It interprets escape sequences per default. We already
 + tried 'echo -E' but had no real success. If errors occur
 + please set the SEO variable in 'configure' manually to
 + the required 'echo' options, i.e. those which force your
 + 'echo' to not interpret escape sequences per default.
 + using installation path layout: Apache (config.layout)
Creating Makefile
Creating Configuration.apaci in src
Syntax error --- The configuration file is used only to
define the list of included modules or to set Makefile in src
options or Configure rules, and I don't see that at all:
/root/ispconfig/openssl
yes
default
no
no
no
 `$(SRCDIR)/apaci`
no
default
default
no
no
no
yes
no
default
no
default
default
[................................................He re is weird stuff happens........................................... .]
Code:
./configure:[1mError[m: APACI failed
ERROR: Could not configure Apache
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory
Please enter your MySQL server:localhost
OK
Please enter your MySQL user:root
Please enter your MySQL password:
OK
Please enter a name for the ISPConfig database (e.g. db_ispconfig):db_ispconfig
Please enter the IP address of the ISPConfig web (e.g. 192.168.0.1):192.168.1.5
OK
Please enter the host name (e.g. www):www(edited)
Please enter the domain (e.g. xyz.de):xyz.de(edited)
The URL is not reachable!
Please enter the host name (e.g. www):www(edited but same)
Please enter the domain (e.g. xyz.de):xyz.de(edited but same)
OK
Please select the protocol (http or https (SSL encryption)) to use to access the ISPConfig system:
1) HTTPS
2) HTTP
Your Choice: 2

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
Restarting some services...
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
 * Stopping Postfix Mail Transport Agent postfix      [80G
[74G[ OK ]
 * Starting Postfix Mail Transport Agent postfix      [80G
[74G[ OK ]
./setup2: line 1163: /etc/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://www.xyz.de:81 (edited)

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /home/stocker/installs/install_ispconfig/compile_aps/../..: No such file or directory
http://acm.ucoclub.org/page1.png

http://acm.ucoclub.org/page2.png

Here is my netstat -tap

Code:
stocker@linux-server:~/installs$ netstat -tap
(Not all processes could be identified, non-owned process info
 will not be shown, you would have to be root to see it all.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address          Foreign Address        State      PID/Program name
tcp        0      0 *:imaps                *:*                    LISTEN      -
tcp        0      0 *:pop3s                *:*                    LISTEN      -
tcp        0      0 *:swat                  *:*                    LISTEN      -
tcp        0      0 localhost:mysql        *:*                    LISTEN      -
tcp        0      0 *:netbios-ssn          *:*                    LISTEN      -
tcp        0      0 *:pop3                  *:*                    LISTEN      -
tcp        0      0 *:imap2                *:*                    LISTEN      -
tcp        0      0 *:www                  *:*                    LISTEN      -
tcp        0      0 *:ftp                  *:*                    LISTEN      -
tcp        0      0 localhost:ipp          *:*                    LISTEN      -
tcp        0      0 *:smtp                  *:*                    LISTEN      -
tcp        0      0 *:microsoft-ds          *:*                    LISTEN      -
tcp        0      0 192.168.1.:microsoft-ds 192.168.1.105:64257    ESTABLISHED -
tcp        0      0 192.168.1.5:netbios-ssn 192.168.1.101:1469      TIME_WAIT  -
tcp6      0      0 [::]:ssh                [::]:*                  LISTEN      -
tcp6      0      0 192.168.1.5%2055076:ssh 192.168.1.105%205:64278 ESTABLISHED -

Im out of ideas... please assist!

stocker741 6th October 2008 07:22
So, I went and did the perfect Install to the T on my ubuntu system and same story.... Though I no longer have those weird errors..... but still the unable to connect on port 81.

Here is my new netstat -t
Code:
stocker@server:~$ netstat -tap
(No info could be read for "-p": geteuid()=1000 but you should be root.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address          Foreign Address        State      PID/Program name
tcp        0      0 *:swat                  *:*                    LISTEN      -
tcp        0      0 localhost:mysql        *:*                    LISTEN      -
tcp        0      0 *:netbios-ssn          *:*                    LISTEN      -
tcp        0      0 *:www                  *:*                    LISTEN      -
tcp        0      0 localhost:domain        *:*                    LISTEN      -
tcp        0      0 localhost:ipp          *:*                    LISTEN      -
tcp        0      0 *:smtp                  *:*                    LISTEN      -
tcp        0      0 localhost:953          *:*                    LISTEN      -
tcp        0      0 *:https                *:*                    LISTEN      -
tcp        0      0 *:microsoft-ds          *:*                    LISTEN      -
tcp        0      0 server.digi:netbios-ssn 192.168.1.118:1038      ESTABLISHED -
tcp        0      0 server.dig:microsoft-ds 192.168.1.119:2677      ESTABLISHED -
tcp6      0      0 [::]:imaps              [::]:*                  LISTEN      -
tcp6      0      0 [::]:pop3s              [::]:*                  LISTEN      -
tcp6      0      0 [::]:pop3              [::]:*                  LISTEN      -
tcp6      0      0 [::]:imap2              [::]:*                  LISTEN      -
tcp6      0      0 [::]:ftp                [::]:*                  LISTEN      -
tcp6      0      0 [::]:domain            [::]:*                  LISTEN      -
tcp6      0      0 [::]:ssh                [::]:*                  LISTEN      -
tcp6      0      0 [::]:smtp              [::]:*                  LISTEN      -
tcp6      0      0 ip6-localhost:953      [::]:*                  LISTEN      -

till 6th October 2008 09:56
Please run:

/etc/init.d/ispconfig_server start

The errors in your first install most likely occured because you executed the script with sudo instead of being root.

stocker741 6th October 2008 23:07
I went and redid the setup and everything went perfectly... but I cant start it....

Code:
root@server:/home/stocker# /etc/init.d/ispconfig_server start
bash: /etc/init.d/ispconfig_server: No such file or directory
root@server:/home/stocker#

falko 7th October 2008 17:15
What's the output of
Code:
df -h
?
Are there any errors or warnings in the ISPConfig installation log in /var/log?

stocker741 7th October 2008 18:00
Alright! I been doing research and I figured it out from one of your old post.

I went and downloaded version 2.2.18

then I did
Code:
apt-get install mysql-server mysql-client libmysqlclient15-dev
then and #bind-address
Code:
vi /etc/mysql/my.cnf
then re ran the setup.
Once it finished i was able to access it! but admin, admin didn't work.

I re-enabled my php and installed phpMyAdmin.

Went to my db_ispconfig and noticed it was blank. I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!

till 7th October 2008 18:07
Quote:
I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!
I doubt that. The sql file does not contain the nescessary data and can not be installed the way you did. Go to administartion > server > settings in ispconfig, change a setting and click on save. Go back and check if the edited setting has been saved. If yot, you will have to reinstall ISPConfig completely or play back a backup of the original database if available.

stocker741 7th October 2008 18:19
Curses...

reinstalling now...

hahni 14th October 2008 19:43
Quote:
Originally Posted by stocker741 (Post 149046)
Alright! I been doing research and I figured it out from one of your old post.

I went and downloaded version 2.2.18

then I did
Code:
apt-get install mysql-server mysql-client libmysqlclient15-dev
then and #bind-address
Code:
vi /etc/mysql/my.cnf
then re ran the setup.
Once it finished i was able to access it! but admin, admin didn't work.

I re-enabled my php and installed phpMyAdmin.

Went to my db_ispconfig and noticed it was blank. I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!
Your tipp will not work on my machine:

---
./setup
Debian lenny/sid.0
./setup2: line 76: export: `/etc/init.d': not a valid identifier
Upgrade einer existierenden ISPConfig-Installation. / Upgrading an existing ISPConfig installation. / Mise ▒ jour d'une installation d'ISPConfig existante.

Das Upgrade wird von Ihnen ge▒nderte Templates/Dateien von ISPConfig ▒berspielen. Wenn Sie diese Dateien sichern m▒chten, sollten Sie jetzt eine zweite Shell ▒ffnen, um ein Backup der betroffenen Dateien durchzuf▒hren.
The upgrade will overwrite your manual changes to files/templates of ISPConfig. In order to save those files you should open a second shell to make a backup of the affected files.
En uppgradering kommer att skriva ▒ver manuella ▒ndringar gjorda p▒ filer/mallar i ISPConfig.F▒r att spara dessa ▒ndringar b▒r du ▒ppna ett andra skal f▒nster f▒r att g▒ra en backup p▒ ber▒rda filer.
Cette mise ▒ jour va supprimer vos changements dans les fichiers des manuels/modeles d'ISPConfig. Pour sauvegarder ces fichiers vous devez ouvrir une seconde fen▒tre shell et enregistrer les fichiers concern▒s.
Shutting down ISPConfig system...
/root/ispconfig/httpd/bin/apachectl stop: httpd stopped
ISPConfig system stopped!
W▒hlen Sie Ihre Sprache (deutsch/englisch/spanisch/franz▒sisch/italienisch/niederl▒ndisch/polnisch/schwedisch): / Please choose your language (German/English/Spanish/French/Italian/Dutch/Polish/Swedish): / Merci de choisir votre langue (Allemand/Anglais/Espagnol/Fran▒ais/Italien/N▒erlandais/Polonais/Su▒dois):
1) de
2) en
3) es
4) fr
5) it
6) nl
7) pl
8) se
Ihre Wahl: / Your Choice: / Votre Choix:
---

Shawn Brant 14th October 2008 22:47
I am in the same boat. I have Fedora 8 and followed the perfect setup and then installed ispconfig but I can not access it and further more the file does not exist in init.d I also do not see the database I specified. Here is the log file. Any help would be appreciated.

Code:
Tue Oct 14 16:38:47 EDT 2008 - [ISPConfig] - installation directory: /usr/local/src/install_ispconfig
Tue Oct 14 16:38:47 EDT 2008 - [ISPConfig] - operating system: Fedora 8.0
Tue Oct 14 16:38:50 EDT 2008 - [ISPConfig] - Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau syst�me.
Tue Oct 14 16:38:54 EDT 2008 - [ISPConfig] - selected language: en
Tue Oct 14 16:38:56 EDT 2008 - [ISPConfig] - installation note accepted
Tue Oct 14 16:38:58 EDT 2008 - [ISPConfig] - licence accepted
Tue Oct 14 16:39:00 EDT 2008 - [ISPConfig] - installation mode: standard
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - mail: postfix
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail=postfix ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_log=/var/log/maillog ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_virtusertable=/etc/postfix/virtusertable ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_local_host_names=/etc/postfix/local-host-names ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - ftp: proftpd
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp=proftpd ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_conf=/etc/proftpd.conf ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_version=standalone ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_log=/var/log/xferlog ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - procmail found: /usr/bin/procmail
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - quota found: /usr/bin/quota
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - mysql found: /usr/bin/mysql
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - openssl found: /usr/bin/openssl
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - named found: /usr/sbin/named
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - iptables found: /sbin/iptables
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - httpd found: /usr/sbin/httpd
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - httpd syntax ok!
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_path_httpd_root=/var/www ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - gcc found: /usr/bin/gcc
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - make found: /usr/bin/make
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - flex found: /usr/bin/lex
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - g++ found: /usr/bin/g++
Tue Oct 14 16:45:16 EDT 2008 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Tue Oct 14 16:45:16 EDT 2008 - [ISPConfig] - WARNING: could not move directory ispconfig_tmp to /root/ispconfig
Tue Oct 14 16:46:13 EDT 2008 - [ISPConfig] - httpd restart successful
Tue Oct 14 16:46:13 EDT 2008 - [ISPConfig] - postfix restart successful
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - file /root/ispconfig/dist.info deleted
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - directory install_ispconfig deleted
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - ##############################


All times are GMT +2. The time now is 20:05.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.