ISPCONFIG installed :81 broke
:mad: I have reinstalled linux/spconfig so many times My fingers are swollen and bloody. Why oh why does this not work?
the link says it works https://www.lendingtreez.com yet when you add the :81 nothing.
How will I get to the admin section?
Crap, please help, totally lost. the install in putty said that everything is installed and ready to use, MYSQL successful blah blah, this has taken me months just to get this far.
Please try to reach the controlpanel with your IP address instead of the domain. Replace the IP in the exampls with your server IP.
or if you chse http in the installer:
If this wont work, please execute:
and try again. If this wont help, please post the output of the command:
I tried it all, nothing worked.
OK none of that worked.:mad:
[root@server1 /]# /etc/init.d/ispconfig_server start
Starting ISPConfig system...
/root/ispconfig/httpd/bin/apachectl startssl: httpd (pid 19360) already running
FreshClam is already running!
ISPConfig system is now up and running!
Same results. :mad:
Is this where you tell me to start over from scratch?:mad:
The (:81 is what doesn't work) When you go to https://lendingtreez.com or https://184.108.40.206 they both work. Add the (:81) and nothing!
I have followed all steps to the "T"
I have done that 1 million times already. So lost.:confused:
Please post the output of:
Is your server installed in a NAT enviroment (your local network) or in a datacenter?
I've just tried to connect to https://www.lendingtreez.com:81/, and I got the Firefox -8182 error which means you have a corrupt certificate. Create a new one, as described in this thread: http://www.howtoforge.com/forums/showthread.php?t=121
Here is netstat -tap
This server is a home network via dlink. The ports are open and set to this computers emac address.
Proto Recv-Q Send-Q Local Address Foreign Address Stat e PID/Program name
tcp 0 0 *:32769 *:* LIST EN -
tcp 0 0 *:nfs *:* LIST EN -
tcp 0 0 *:imaps *:* LIST EN 2954/xinetd
tcp 0 0 *:675 *:* LIST EN 3042/rpc.mountd
tcp 0 0 *:pop3s *:* LIST EN 2954/xinetd
tcp 0 0 server1.sample.com:10026 *:* LIST EN 2238/master
tcp 0 0 *:mysql *:* LIST EN 2152/mysqld
tcp 0 0 *:netbios-ssn *:* LIST EN 3258/smbd
tcp 0 0 *:pop3 *:* LIST EN 2954/xinetd
tcp 0 0 *:imap *:* LIST EN 2954/xinetd
tcp 0 0 *:sunrpc *:* LIST EN 2226/portmap
tcp 0 0 *:http *:* LIST EN 2101/httpd
tcp 0 0 *:x11 *:* LIST EN 2777/X
tcp 0 0 *:81 *:* LIST EN 1804/ispconfig_http
tcp 0 0 *:787 *:* LIST EN 2301/rpc.statd
tcp 0 0 *:628 *:* LIST EN 2992/rpc.rquotad
tcp 0 0 *:ftp *:* LIST EN 2275/proftpd: (acce
tcp 0 0 server1.sample.com:5335 *:* LIST EN 2861/mDNSResponder
tcp 0 0 *:smtp *:* LIST EN 2238/master
tcp 0 0 *:https *:* LIST EN 2101/httpd
tcp 0 0 *:microsoft-ds *:* LIST EN 3258/smbd
tcp 0 0 server1.sample.com:54862 server1.sample.com:http TIME _WAIT -
tcp 0 0 server1.sample.com:ftp server1.sample.com:40246 TIME _WAIT -
tcp 0 0 *:x11 *:* LIST EN 2777/X
tcp 0 0 *:ssh *:* LIST EN 2936/sshd
tcp 0 2516 localhost:ssh localhost:4265 ESTA BLISHED 32495/1
tcp 0 0 localhost:ssh localhost:1059 ESTA BLISHED 1869/sshd: root@not
Not sure what all this means.
The output from netstat -tap is OK. Please try the solution that falko mentioned.
ok this did not work, could I just set to http instead of https? I am lost. Please help.
Did you do as outlined in this post? http://www.howtoforge.com/forums/sho...58&postcount=4
If you want to change from https to http, have a look here: http://www.howtoforge.com/forums/showthread.php?t=2509
ok, ifeel like everythig I do does not work. ISP config is not working correct, I just reinstalled for the 500th time, why can't :81 work? I even changed the certificate
what else is there to do? :mad:
Please someone help me! :eek:
|All times are GMT +2. The time now is 18:08.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.