HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=4)
-   -   Slow connection to FC6 system post-LAMP install? (http://www.howtoforge.com/forums/showthread.php?t=19751)

cfspence 23rd January 2008 23:54

Slow connection to FC6 system post-LAMP install?
 
Greetings,

First, I'm an utter novice. :confused:

I have a FC6 system running on a HP dc7700p PC (4 GB RAM, 2 250GB HDD's, Intel Core 2 Duo [Intel Q965 Express Chipset], at 2.13 GHz, Gigabit ethernet, ATI Radeon X1600XT video card). After installation of the LAMP server according to the How-to (omitting the ISPConfig, BIND database, and mail server), I noticed a big slow-down in my remote connection (but from within the LAN) to the system via a SSH client. Also the Apache web server was VERY slow to serve pages from this system to my office PC (within the LAN).

Any suggestions as to how I can go about diagnosing and resolving this problem?

AdvTHANKSance,

--Clay

falko 24th January 2008 15:54

Take a look at the logs in the /var/Log directory.

lyndros 25th January 2008 00:14

cat u show us the dump of "dmesg"

thks

cfspence 25th January 2008 20:08

dmesg dump
 
Yes. Here is the dmesg dump. I seem to now have broken httpd as it will not start - I will attempt to reconfig. Still the connection time with SSH is very slow. It does appear from the /var/log/secure log that SSH does a reverse DNS lookup. I understand this can slow things down. The Apache server may be doing the same thing. In either case I am unsure how to turn reverse lookup off.

Here is the dump:
==============================
Linux version 2.6.22.9-61.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Sep 27 18:48:03 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffb1d00 (usable)
BIOS-e820: 00000000dffb1d00 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f9bf0
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000E7610, 0014 (r0 COMPAQ)
ACPI: RSDT DFFC3D40, 0040 (r1 HPQOEM SLIC-BPC 20070206 0)
ACPI: FACP DFFC3DE8, 0074 (r1 COMPAQ BROADH2O 1 0)
ACPI: DSDT DFFC4143, 9A2A (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E)
ACPI: FACS DFFC3D00, 0040
ACPI: APIC DFFC3E5C, 0068 (r1 COMPAQ BROADH2O 1 0)
ACPI: ASF! DFFC3EC4, 0063 (r32 COMPAQ BROADH2O 1 0)
ACPI: MCFG DFFC3F27, 003C (r1 COMPAQ BROADH2O 1 0)
ACPI: TCPA DFFC3F63, 0032 (r1 COMPAQ BROADH2O 1 0)
ACPI: SLIC DFFC3F95, 0176 (r1 HPQOEM SLIC-BPC 1 0)
ACPI: HPET DFFC410B, 0038 (r1 COMPAQ BROADH2O 1 0)
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
Built 1 zonelists. Total pages: 1040384
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07cd000 soft=c07ad000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2128.097 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3627924k/4194304k available (2250k kernel code, 40576k reserved, 1202k data, 268k init, 2752196k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0765000 - 0xc07a8000 ( 268 kB)
.data : 0xc0632b60 - 0xc075f584 (1202 kB)
.text : 0xc0400000 - 0xc0632b60 (2250 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 4258.46 BogoMIPS (lpj=2129231)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07ce000 soft=c07ae000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4255.99 BogoMIPS (lpj=2127999)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
Total of 2 processors activated (8514.46 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
Time: 16:06:42 Date: 11/20/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xeafb8, last bus=32
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.

cfspence 25th January 2008 20:09

dmseg dump part 2
 
part 2
=====================================
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0e: ioport range 0x400-0x41f has been reserved
pnp: 00:0e: ioport range 0x420-0x43f has been reserved
pnp: 00:0e: ioport range 0x440-0x45f has been reserved
pnp: 00:0e: ioport range 0x460-0x47f has been reserved
pnp: 00:0e: ioport range 0x480-0x48f has been reserved
pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved
pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
pnp: 00:0f: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:10: iomem range 0x100000-0xdfffffff could not be reserved
pnp: 00:10: iomem range 0xe4000-0xfffff could not be reserved
pnp: 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: 1000-1fff
MEM window: f0500000-f07fffff
PREFETCH window: e0000000-f01fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2276k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1198166802.417:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4F4E2A6A996AC8BB
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT DFFCE68A, 0320 (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x2220 (irq = 17) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ST3250824AS, ATA DISK drive
hdb: ST3250824AS, ATA DISK drive
Probing IDE interface ide1...
hdc: HL-DT-STDVD+-RW GSA-H31L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hda: cache flushes supported
hda: hda1 hda2
hdb: max request size: 512KiB
hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hdb: cache flushes supported
hdb: hdb1
ide-floppy driver 0.99.newide
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 3:302:136
hash matches device 0000:00:03.2
Freeing unused kernel memory: 268k freed
Write protecting the kernel read-only data: 925k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 18, io base 0x00002120
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 19, io base 0x00002140
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002160
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002180
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf0426000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0426400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: 0x1F0 IDE port busy -- conflict with ide0
ata_piix 0000:00:1f.2: 0x170 IDE port busy -- conflict with ide1
ata_piix 0000:00:1f.2: no available legacy port
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
usb 6-2: new high speed USB device using ehci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: Logitech Logitech USB Optical Mouse as /class/input/input1
input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
usb 4-2: new low speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
input: CHICONY HP Basic USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-2

cfspence 25th January 2008 20:10

dmesg dump part 3
 
part 3
====================

SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1198166808.244:2): selinux=0 auid=4294967295
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3272
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 3391 MBytes.
[fglrx] USWC is disabled in module parameters
[fglrx] PAT is disabled!
[fglrx] module loaded - fglrx 8.39.4 [Jul 20 2007] on minor 0
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[B] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:7e:12:c7
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
FDC 0 is a post-1991 82077
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PBTN]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
Adding 12582904k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:12582904k
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
i2c /dev entries driver
eth0: no IPv6 routers present
[fglrx] PCIe has already been initialized. Reinitializing ...
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 268304384
[fglrx] free LFB = 244305920
[fglrx] max single LFB = 244305920
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
e1000: eth0: e1000_watchdog: NIC Link is Down
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO

falko 26th January 2008 19:26

Quote:

Originally Posted by cfspence
It does appear from the /var/log/secure log that SSH does a reverse DNS lookup.

Can you post the exact message? What's in /etc/hosts and /etc/resolv.conf? What's the output of
Code:

hostname
and
Code:

hostname -f
?

cfspence 28th January 2008 05:07

The results of both hostname and hostname -f are
Code:

gnlewis.ic.edu
which is the hostname of my system.

Here is the contents of /etc/hosts:
Quote:

# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
209.174.140.169 gnlewis.ic.edu gnlewis
::1 gnlewis.ic.edu gnlewis localhost.localdomain localhost
Here is the contents of /etc/hosts.resolv
Quote:

search ic.edu
nameserver 209.174.140.140
nameserver 209.174.140.2
Here is a bit of the secure logfile (showing sshd activity). What's up with the error on port 22 "can't bind port 22 address already in use"?

Quote:

Jan 25 04:17:19 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 25 04:18:03 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx
Jan 25 04:18:03 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 25 04:55:03 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx
Jan 25 12:49:48 gnlewis sshd[7224]: Accepted password for cfspence from 209.174.141.201 port 2352
ssh2
Jan 25 12:49:48 gnlewis sshd[7224]: pam_unix(sshd:session): session opened for user cfspence by (
uid=0)
Jan 25 12:49:57 gnlewis su: pam_unix(su:session): session opened for user root by cfspence(uid=50
0)
Jan 25 12:55:02 gnlewis sshd[7227]: subsystem request for sftp
Jan 25 13:40:15 gnlewis su: pam_unix(su:session): session closed for user root
Jan 25 13:40:17 gnlewis sshd[7224]: pam_unix(sshd:session): session closed for user cfspence
Jan 25 13:51:36 gnlewis gdm[3299]: pam_unix(gdm:session): session opened for user root by (uid=0)
Jan 25 14:01:20 gnlewis userhelper[7704]: pam_timestamp(system-config-securitylevel:session): upd
ated timestamp file `/var/run/sudo/root/1'
Jan 25 14:01:20 gnlewis userhelper[7707]: running '/usr/share/system-config-securitylevel/system-
config-securitylevel.py' with root privileges on behalf of 'root'
Jan 25 14:39:58 gnlewis gdm[3299]: pam_unix(gdm:session): session closed for user root
Jan 25 14:40:02 gnlewis sshd[2758]: Received signal 15; terminating.
Jan 25 14:42:06 gnlewis sshd[2752]: Server listening on :: port 22.
Jan 25 14:42:06 gnlewis sshd[2752]: error: Bind to port 22 on 0.0.0.0 failed: Address already in
use.
Jan 25 14:53:07 gnlewis sshd[3341]: Accepted password for cfspence from 209.174.141.201 port 2906
ssh2
Jan 25 14:53:07 gnlewis sshd[3341]: pam_unix(sshd:session): session opened for user cfspence by (
uid=0)
Jan 25 14:53:31 gnlewis su: pam_unix(su:session): session opened for user root by cfspence(uid=50
0)
Jan 25 17:53:00 gnlewis su: pam_unix(su:session): session closed for user root
Jan 25 17:53:02 gnlewis sshd[3341]: pam_unix(sshd:session): session closed for user cfspence
Jan 26 04:17:21 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 26 04:18:07 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx
Jan 26 04:18:07 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 26 04:55:26 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx
Jan 27 04:17:19 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 27 04:18:03 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx
Jan 27 04:18:03 gnlewis runuser: pam_unix(runuser:session): session opened for user beaglidx by (
uid=0)
Jan 27 04:55:30 gnlewis runuser: pam_unix(runuser:session): session closed for user beaglidx

falko 29th January 2008 19:09

What's the output of
Code:

netstat -tap
?


All times are GMT +2. The time now is 17:39.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.