HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials

HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials (http://www.howtoforge.com/forums/index.php)
-   Installation/Configuration (http://www.howtoforge.com/forums/forumdisplay.php?f=16)
-   -   install help (http://www.howtoforge.com/forums/showthread.php?t=14841)

alaskaman 17th August 2007 19:57

install help
 
i need to know how to fix this im tryed many time to install still geting the same error ./setup2 line 873 ispconfig tmp/php/bin/php no such file or dir error the php binary coming with ispconfig does not work proerly on your system the installation stops here at first i thoughtthis be cuse i did not have php installed but i do nhave it install and it working just find any idea how can fix this problem? btw im using mandriva

till 17th August 2007 22:20

There must have been some errors in the configure output before this line. Please post these errors.

neonpush 17th August 2007 22:29

same issue Please help
 
here are the errors I'm getting..


The Digest::SHA1 module is used as a cryptographic hash for some
tests and the Bayes subsystem. It is also used by Razor2.


************************************************** *************************
ERROR: the required HTML::Parser (version 3.43) module is installed,
but is not an up-to-date version. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 293, <STDIN> line 1.


HTML is used for an ever-increasing amount of email so this dependency
is unavoidable. Run "perldoc -q html" for additional information.


************************************************** *************************
ERROR: the required Net::DNS (version 0.34) module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 293, <STDIN> line 1.


Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
perform MX checks, and is also used when manually reporting spam to
SpamCop.

You need to make sure the Net::DNS version is sufficiently up-to-date:

- version 0.34 or higher on Unix systems
- version 0.46 or higher on Windows systems


************************************************** *************************
NOTE: the optional Mail::SPF module is not installed.

Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams. (This is preferred
over Mail::SPF::Query.)


************************************************** *************************
NOTE: the optional Mail::SPF::Query module is not installed.

Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams. (Mail::SPF is
preferred instead of this module.)


************************************************** *************************
NOTE: the optional IP::Country module is not installed.

Used by the RelayCountry plugin (not enabled by default) to determine
the domain country codes of each relay in the path of an email.


************************************************** *************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

Used to check message signatures against Vipul's Razor collaborative
filtering network. Razor has a large number of dependencies on CPAN
modules. Feel free to skip installing it, if this makes you nervous;
SpamAssassin will still work well without it.

More info on installing and using Razor can be found
at http://wiki.apache.org/spamassassin/InstallingRazor .


************************************************** *************************
NOTE: the optional Net::Ident module is not installed.

If you plan to use the --auth-ident option to spamd, you will need
to install this module.


************************************************** *************************
NOTE: the optional IO::Socket::INET6 module is not installed.

This is required if the first nameserver listed in your IP
configuration or /etc/resolv.conf file is available only via
an IPv6 address.


************************************************** *************************
NOTE: the optional IO::Socket::SSL module is not installed.

If you wish to use SSL encryption to communicate between spamc and
spamd (the --ssl option to spamd), you need to install this
module. (You will need the OpenSSL libraries and use the
ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
compatibile spamc.)


************************************************** *************************
NOTE: the optional Compress::Zlib module is not installed.

If you wish to use the optional zlib compression for communication
between spamc and spamd (the -z option to spamc), you need to install
this module.


************************************************** *************************
NOTE: the optional Time::HiRes module is not installed.

If this module is installed, the processing times are logged/reported
more precisely in spamd.


************************************************** *************************
NOTE: the optional Mail::DomainKeys module is not installed.

If this module is installed, and you enable the DomainKeys plugin,
SpamAssassin will perform Domain Key lookups when Domain Key
information is present in the message headers. (Note that new versions
of Mail::DKIM render this module superfluous.)


************************************************** *************************
NOTE: the optional Mail::DKIM module is not installed.

If this module is installed, and you enable the DKIM plugin,
SpamAssassin will perform DKIM lookups when a DKIM-Signature
header is present in the message headers. (New versions of this module
support both Domain Keys and DKIM, rendering Mail::DomainKeys obsolete.)


************************************************** *************************
NOTE: the optional Archive::Tar (version 1.23) module is not installed.

The "sa-update" script requires this module to access tar update
archive files.


************************************************** *************************
NOTE: the optional IO::Zlib (version 1.04) module is not installed.

The "sa-update" script requires this module to access compressed
update archive files.


************************************************** *************************
NOTE: the optional Encode::Detect module is not installed.

If you plan to use the normalize_charset config setting to detect
charsets and convert them into Unicode, you will need to install
this module.

REQUIRED module missing: Digest::SHA1
REQUIRED module out of date: HTML::Parser
REQUIRED module missing: Net::DNS
optional module missing: Mail::SPF
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: Compress::Zlib
optional module missing: Time::HiRes
optional module missing: Mail::DomainKeys
optional module missing: Mail::DKIM
optional module missing: Archive::Tar
optional module missing: IO::Zlib
optional module missing: Encode::Detect

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

till 17th August 2007 22:37

@neonpush

Your issue is most likely not the same then the issue that the first poster ahs as every problem that occurs during installation results in this error message, so plaese make a new thread the next time.

To your problem, I guess you use a Centos4.x version? then try this:

We also need the module HTML::Parser. We could install the CentOS package perl-HTML-Parser, but this version is too old for the SpamAssassin version that comes with ISPConfig. It would result in the following error message during ISPConfig installation:

REQUIRED module out of date: HTML::Parser

Therefore we must install the latest HTML::Parser using the Perl shell.

Run the following command to start the Perl shell:

perl -MCPAN -e shell

If you run the Perl shell for the first time you will be asked some questions. In most cases the default answers are ok. Because there's no ncftp package for CentOS, the Perl shell cannot find the programs ncftpget and ncftp, and you'll see something like this:

Warning: ncftpget not found in PATH
Where is your ncftpget program? []
Warning: ncftp not found in PATH
Where is your ncftp program? []

It's ok to hit ENTER in both cases.

Please note: If you run a firewall on your system you might have to turn it off while working on the Perl shell in order for the Perl shell to be able to fetch the needed modules without a big delay. You can switch it on afterwards.

Now type in the following command to install the Perl module HTML::Parser:

install Digest::SHA1
install NET::DNS
install HTML::Parser

If the installation is successful, you'll see a line like this at the end:

/usr/bin/make install -- OK

Type

q

afterwards to leave the Perl shell.

neonpush 17th August 2007 23:20

Thanks
 
1st of all sorry for posting in the wrong place. 2nd thanks for the input I've just installed the new parser and it worked fine... Thank you very much for the hand...

alaskaman 18th August 2007 10:11

Error exit delayed from previous errors
./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

falko 18th August 2007 12:28

Please post the full error output (there must have been errors before the one you posted).

Also, please don't install ISPConfig from the directories /root/ispconfig and /home/admispconfig. Use something like /tmp instead.

alaskaman 18th August 2007 17:25

that is the full error

till 19th August 2007 10:27

Quote:

Originally Posted by alaskaman
that is the full error

This can not be the full error.Please post the error lines before this error.


All times are GMT +2. The time now is 07:25.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.