jake
19th October 2006, 09:53
Hi,
I know, there're many threads covering this issue but none of it seem to help me out. The problem is that i can't login into the pop3 server.
Here's more details:
-The pop3 server is running (check via various site)
-I can connect with telnet to the pop3 on port 110
-I can't login on telnet using either webx_xxx or xx@domain.com logins (results in error: login failed)
-The user account is there in /etc/shadow and /etc/passwd
-I send a mail and it's in the user maildir.
-My authdaemonrc is set to: modulelist="authuserdb authpam" (setting it only to authpam doesn't work either):
##VERSION: $Id: authdaemonrc.in,v 1.8 2001/10/07 02:16:22 mrsam Exp $
#
# Copyright 2000-2001 Double Precision, Inc. See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored. Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited. Multiline variable contents,
# with the \ continuation character, are not allowed. Everything must
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
##NAME: authmodulelist:0
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
# can use are: authcustom authcram authuserdb authldap authpgsql authmysql authpam
authmodulelist="authuserdb authpam"
##NAME: authmodulelistorig:1
#
# This setting is used by Courier's webadmin module, and should be left
# alone
authmodulelistorig="authcustom authcram authuserdb authldap authpgsql authmysql authpam"
##NAME: daemons:0
#
# The number of daemon processes that are started. authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE: Some platforms may experience a problem if there's more than
# one daemon. Specifically, SystemV derived platforms that use TLI with
# socket emulation. I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases. Symptoms
# include sporadic authentication failures. If you start getting
# authentication failures, increase daemons. However, the default of 5
# SHOULD be sufficient. Bumping up daemon count is only a short-term
# solution. The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...
daemons=5
##NAME: version:0
#
# When you have multiple versions of authdaemond.* installed, authdaemond
# just picks the first one it finds. Set "version" to override that.
# For example: version=authdaemond.plain
version=""
##NAME: authdaemonvar:0
#
# authdaemonvar is here, but is not used directly by authdaemond. It's
# used by various configuration and build scripts, so don't touch it!
authdaemonvar=/var/run/courier/authdaemon
Login in via webmail doesn't work either. (of course using the correct logins: emailadress for webmail, username for pop3, but other combinations don't work either)
All users are there in virtualuser table of postfix.
Any help/hints is greatly appreciated!
I know, there're many threads covering this issue but none of it seem to help me out. The problem is that i can't login into the pop3 server.
Here's more details:
-The pop3 server is running (check via various site)
-I can connect with telnet to the pop3 on port 110
-I can't login on telnet using either webx_xxx or xx@domain.com logins (results in error: login failed)
-The user account is there in /etc/shadow and /etc/passwd
-I send a mail and it's in the user maildir.
-My authdaemonrc is set to: modulelist="authuserdb authpam" (setting it only to authpam doesn't work either):
##VERSION: $Id: authdaemonrc.in,v 1.8 2001/10/07 02:16:22 mrsam Exp $
#
# Copyright 2000-2001 Double Precision, Inc. See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored. Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited. Multiline variable contents,
# with the \ continuation character, are not allowed. Everything must
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
##NAME: authmodulelist:0
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
# can use are: authcustom authcram authuserdb authldap authpgsql authmysql authpam
authmodulelist="authuserdb authpam"
##NAME: authmodulelistorig:1
#
# This setting is used by Courier's webadmin module, and should be left
# alone
authmodulelistorig="authcustom authcram authuserdb authldap authpgsql authmysql authpam"
##NAME: daemons:0
#
# The number of daemon processes that are started. authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE: Some platforms may experience a problem if there's more than
# one daemon. Specifically, SystemV derived platforms that use TLI with
# socket emulation. I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases. Symptoms
# include sporadic authentication failures. If you start getting
# authentication failures, increase daemons. However, the default of 5
# SHOULD be sufficient. Bumping up daemon count is only a short-term
# solution. The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...
daemons=5
##NAME: version:0
#
# When you have multiple versions of authdaemond.* installed, authdaemond
# just picks the first one it finds. Set "version" to override that.
# For example: version=authdaemond.plain
version=""
##NAME: authdaemonvar:0
#
# authdaemonvar is here, but is not used directly by authdaemond. It's
# used by various configuration and build scripts, so don't touch it!
authdaemonvar=/var/run/courier/authdaemon
Login in via webmail doesn't work either. (of course using the correct logins: emailadress for webmail, username for pop3, but other combinations don't work either)
All users are there in virtualuser table of postfix.
Any help/hints is greatly appreciated!