problem with vmware-image on an already running server

[vistree]

Hello,
I am new to this great software and the forum ;-)
I am running an already configured server with another ISP. Now I want to change to ispconfig - but first want my customers to try it out.

My idea: I installed vmware-server on the webserver an than I download the great out-of-the-box ISPConfig image from vmware-website.

It is now running but I can't reach the control panel or any website (which are different from the already existing ones !) out of the internet.

The server has a public ip and I setup the vmware-image to use NAT. On both now run an apache2 and postfix ....

The server is reachable but the vmware-image not ;-(
I tried to work with apache proxypass and .htaccess and apache mod_rewrite - but did't come to a result.

Does anyone in this forum tried out an equal solution?
Or does someone knows "out-of-the-box" ( ;-) what to do, that the websites and mails on the vmware-ISPconfig reach there target?

Thank you a lot
Kai

[falko]

The server has a public ip and I setup the vmware-image to use NAT. On both now run an apache2 and postfix ....

Did you configure your server to forward requests to your virtual machine? Why didn't you use bridging?

[vistree]

Did you configure your server to forward requests to your virtual machine? Why didn't you use bridging?
Hi Falco,
thank you for reply.

I want to install on a hosted webserver - and there is only one public IP included :mad:

The Forwarding is exact the problem I can't fit. I tried to find rules for iptables to portforward incomming on port 81 to port 81 of the vm-guest. I think I have not the accect way how to implement.

The same is on using apaches mod_rewrite.

May knowledge is to small to get it work ....

Any hints?

Kai

[falko]

The Forwarding is exact the problem I can't fit. I tried to find rules for iptables to portforward incomming on port 81 to port 81 of the vm-guest. I think I have not the accect way how to implement.

Have a look here: http://www.howtoforge.com/perfect_setup_xen3_debian_p6

[vistree]

Hi Falca,
thank you for replying again - and for the link.

Have a look here: http://www.howtoforge.com/perfect_setup_xen3_debian_p6

It is a mess, but it still does not work. I tried to forward port 81 to receive the IPSConfig control panel and to forward all request to port 80 (both to the virtual machine). There is a long request time in the webbrowser, but result is a connection error.

I also tried the XEN 2.6 steps - but still no result. Also tried to disable all the rules on my host (iptables -F / iptables -t nat -F) and then inserting your rules - but still no result.

The host-machine uses a physical network adapter eth0 with public IP, a NAT-adapter from vmware (vmnet8 - ip 192.168.30.1) and lo. The vm has eth0 with 192.168.30.129 and lo.

Are there any rules in addition to your XEN tutorial to include in iptables?

Thank you a lot
Kai

[vistree]

I found a first solution on my vmware-problems. I can now redirect tcp-request from a incomming port (e. g. 81) to the virtual machine.

What I did not know is: vmware-server has a configuration file for NAT, where you can enable port-forwarding.

Including 81:192.168.30.129:81

in

/etc/vmware/vmnet8/nat/nat.conf

does the job without any additional changes (e.g. on iptables).

Regards
Kai

[freeborn]

Using bridge network more easier but you need one more real IP for vmware.
________
NEXIUM LAWSUIT (http://www.classactionsettlements.org/lawsuit/nexium/)
________
Breeana (http://camslivesexy.com/cam/Breeana)

[vistree]

Using bridge network more easier but you need one more real IP for vmware.
He freeborn, as I mentioned out above - I have only ONE public IP so I need NAT.

After several hours of "trial and error" I found the solution.
1. I had to include 2 lines in vmware nat.conf
80=IP.of.the.vmwareguest:80
81=IP.of.the.vmwareguest:81

Nothing else as portforwarding using iptables!

Than - and this seems to be a bug within vmware-server - I had to start the vmware-image using a vmware console tool (vmware-cmd /pathtoimage/image.vmx start) instead of using the remote "VMWare Server Console".

And: now it works ;-)

Thank you for all the hints!
Kai