ISPConfig: from http to https & from https to http

[Hans]

After installing ISPConfig, sometimes we want to change from http to https mode, or as you wish from https to http mode.

With this small instruction you can read how you can do this!
Realise that you have to be careful, do not screw your system!

Here we go:

From http to https:


1) Copy file httpd.conf_https from the Tarball to filefolder /root/ispconfig/httpd/conf

2) Make a copy of the existing httpd.conf file !

3) Rename httpd.conf_https to httpd.conf

4) Open the new httpd.conf and replace {SERVER_NAME} with the server name
(have a look at the backed-up httpd.conf to find out the correct value)

5) Open /home/admispconfig/ispconfig/lib/config.inc.php and change the ISPConfig URL from http to https.

6) Finally restart ISPConfig: /etc/init.d/ispconfig_server restart


From https to http:

1) Copy file httpd.conf_http van de Tarball to filefolder /root/ispconfig/httpd/conf

2) Make a copy of the existing httpd.conf file !

3) Rename httpd.conf_http to httpd.conf

4) Open the new and replace {SERVER_NAME} with the server name
(have a look at the backed-up httpd.conf to find out the correct value)

5) Open /home/admispconfig/ispconfig/lib/config.inc.php and change the ISPConfig URL from https to http.

6) Finally restart ISPConfig: /etc/init.d/ispconfig_server restart


Hans

[AcidKat]

When you sat "copy file from the tarball", where is the tarball located?

[lubos]

When you sat "copy file from the tarball", where is the tarball located? Hi AcidKat,
you have to download so called Tarbal from http://www.ispconfig.org/downloads.htm.
Tarbal is actualy compressed file containing whole software. You can uncompres it (depending on your operational system) in different ways.
Windows:
If you'll download it onto Windows I will suggest to use 7zip, free compressing software available on http://www.7-zip.org/. Make sure that you will uncompress tarbal twice (first ISPConfig-2.2.21.tar.gz file and afterwards uncompress newly created ISPConfig-2.2.21.tar file) as it is compressed twice.
Linux:
Alternatively you can download newest tarbal to Linux by using following command:wget http://prdownloads.sourceforge.net/ispconfig/ISPConfig-2.2.21.tar.gz?download Make sure that you'll download right version of ISPconfig as it must be the same as you have installed on your server. If you did not upgraded to newest version go to ispconfig.org/download and find file matching your installation.
Afterwards you can unpack it by using command:
tar xvfz ISPConfig-2.2.21.tar.gz.Next continue with steps described above. When you finnish you can safely remove both, tarbal and unpacked files from your computer using commands
rm ISPConfig-2.2.21.tar.gz
rm -r install_ispconfig Make sure that you will NOT download tarball to location where is your current installation as you can break it. All above written commands have to be issued from the same directory. You can use e.g. cd /opt/ to go to opt directory and execute all commands from here.
I hope this help you.
Lubos

[TomC]

Hi Hans,

thanks for the great HowTo - it worked perfectly for me a few weeks ago when I changed the configuration of my ISPConfig from https to http.

However, today I came across a little drawback: I upgraded my ISPConfig to the latest version 2.2.22. After the upgrade, the configuration was running with https again. So I had to go through the same procedure once again.

So, somewhere ISPConfig seems to remember whether it was configured to run via http or https. Do you have any idea where this could be and how I can change it so that the next upgrade runs more smoothly?!

Thanks loads,
Tom

[Hans]

@TomC,
I don't know how this can be done.
Probably Till knows the answer..

[falko]

So, somewhere ISPConfig seems to remember whether it was configured to run via http or https. Do you have any idea where this could be and how I can change it so that the next upgrade runs more smoothly?!

Thanks loads,
Tom
Please make sure that $go_info["server"]["server_url"] in /home/admispconfig/ispconfig/lib/config.inc.php has the right value (http).

[_X_]

If someone gets error about certificates for main ISPConfig here is how to recreate them:
http://www.howtoforge.com/faq/14_63_en.html

To make SSL work for client sites in ISPConfig:
under ISPManager/Sites/site.com/Basis>SSL - enable
after that there is NEW SLL tab
Enter all data exept SSL Request: and SSL Certificate:
for Action: Create certificate
Save
after that client can use https for login into ISPConfig and phpmyadmin and webmail (if you created Co-Domain for webmail site change forward from http to https)
certificat is self-signed and you get warning but untill you get proper certification this will work.