PDA

View Full Version : No incomming mail on ISPconfig 3


The-Ghost
3rd May 2009, 12:36
Hi,

I installed a new ISPconfig 3 system with a some domains, but I don't recieve mail.

I have tryed lot's of thing's, mail will not be rejected, I never get a message back.

This is a part of de mail log

May 3 11:10:01 svr-1 postfix/smtpd[28131]: connect from svr-1[127.0.0.1]
May 3 11:10:01 svr-1 postfix/smtpd[28131]: lost connection after CONNECT from svr-1[127.0.0.1]
May 3 11:10:01 svr-1 postfix/smtpd[28131]: disconnect from svr-1[127.0.0.1]
May 3 11:10:01 svr-1 pop3d: Connection, ip=[::ffff:127.0.0.1]
May 3 11:10:01 svr-1 pop3d: Disconnected, ip=[::ffff:127.0.0.1]
May 3 11:10:01 svr-1 imapd: Connection, ip=[::ffff:127.0.0.1]
May 3 11:10:01 svr-1 imapd: Disconnected, ip=[::ffff:127.0.0.1], time=0
May 3 11:12:32 svr-1 postfix/scache[28130]: statistics: start interval May 3 11:09:12
May 3 11:12:32 svr-1 postfix/scache[28130]: statistics: domain lookup hits=0 miss=1 success=0%
May 3 11:12:32 svr-1 postfix/scache[28130]: statistics: address lookup hits=0 miss=1 success=0%
May 3 11:13:21 svr-1 postfix/anvil[28133]: statistics: max connection rate 1/60s for (smtp:124.161.130.2) at May 3 11:09:56
May 3 11:13:21 svr-1 postfix/anvil[28133]: statistics: max connection count 1 for (smtp:124.161.130.2) at May 3 11:09:56
May 3 11:13:21 svr-1 postfix/anvil[28133]: statistics: max cache size 1 at May 3 11:09:56

till
3rd May 2009, 12:43
According to the log the emails are not sent to this server. Please make sure that you have a correct DNS MX Record for the domain that points to the hostname of the server and that the hostname of the server has a corect DNS A-Record pointing to the IP address of the server.

The-Ghost
3rd May 2009, 12:46
This are the record's of the dns file

A future-webdiensten.nl. 78.157.193.70 0
A mail 78.157.193.70 0
A www 78.157.193.70 0
MX future-webdiensten.nl. mail.future-webdiensten.nl. 10

This works also whit the ispconfig 2 server, The only thing I chanced is de destination IP for all the records

till
3rd May 2009, 13:10
Please be aware that it takes up to 48 hours until you receive emails on the new server after you changed the IP addresses.

The-Ghost
3rd May 2009, 19:19
Hi, I know that it takes time before every dns server is updated, but all other records are running to the right ip.
Only the mail is not comming in.

I discoverd a second mail problem, when I try to send mail with SquirrelMail (webmail), it gives an error;

Message not sent. Server replied:
Email delivery error
69 Can't execute command '/usr/sbin/sendmail -i -t -finfo@future-webdiensten.nl'.

Sendmail isn't used in ispconfig 3 or do I something wrong.

Please don't shoot me, I'm a Dutch newbie :)

Regards Carlo

till
3rd May 2009, 23:08
Sendmail is not used by ispconfig, but postfix provides a sendmail wrapper which is installed automatically in /usr/sbin/sendmail, so the setup should work.

Did you follow exactly the ispconfig server setup guide for ispconfig 3?

The-Ghost
3rd May 2009, 23:30
I exactly followed the manuel, that's why I don't understand the problems.
Maybe there is anny issue with yum update for Fedorra, otherwise I can't explane the problems.

I Think to reinstall the system, and take a loke after that.

Regards Carlo

falko
4th May 2009, 12:18
What's in your mail log when you send a mail to your server?

The-Ghost
4th May 2009, 17:43
Hi Falko,

Here is a part of the mail log, I can see that there are some connection try's to the server.

May 4 16:15:51 svr-1 postfix/smtpd[4690]: warning: 309C7E087E6: queue file size limit exceeded
May 4 16:15:51 svr-1 postfix/smtpd[4690]: disconnect from grh210.internetdsl.tpnet.pl[83.3.189.210]
May 4 16:18:56 svr-1 postfix/qmgr[2076]: 4721AE087CA: from=, size=630, nrcpt=1 (queue active)
May 4 16:18:56 svr-1 postfix/qmgr[2076]: 0EC90E087DF: from=, size=777, nrcpt=1 (queue active)
May 4 16:18:56 svr-1 postfix/smtp[4835]: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused
May 4 16:18:56 svr-1 postfix/smtp[4836]: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused
May 4 16:18:56 svr-1 postfix/smtp[4835]: 4721AE087CA: to=, relay=none, delay=147552, delays=147552/0.02/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)
May 4 16:18:56 svr-1 postfix/smtp[4836]: 0EC90E087DF: to=, relay=none, delay=130572, delays=130572/0.04/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)
May 4 16:19:11 svr-1 postfix/anvil[4708]: statistics: max connection rate 1/60s for (smtp:83.3.189.210) at May 4 16:15:50
May 4 16:19:11 svr-1 postfix/anvil[4708]: statistics: max connection count 1 for (smtp:83.3.189.210) at May 4 16:15:50
May 4 16:19:11 svr-1 postfix/anvil[4708]: statistics: max cache size 1 at May 4 16:15:50
May 4 16:20:01 svr-1 pop3d: Connection, ip=[::ffff:127.0.0.1]
May 4 16:20:01 svr-1 pop3d: Disconnected, ip=[::ffff:127.0.0.1]
May 4 16:20:01 svr-1 imapd: Connection, ip=[::ffff:127.0.0.1]
May 4 16:20:01 svr-1 imapd: Disconnected, ip=[::ffff:127.0.0.1], time=0
May 4 16:20:01 svr-1 postfix/smtpd[4929]: connect from svr-1[127.0.0.1]
May 4 16:20:01 svr-1 postfix/smtpd[4929]: lost connection after CONNECT from svr-1[127.0.0.1]
May 4 16:20:01 svr-1 postfix/smtpd[4929]: disconnect from svr-1[127.0.0.1]
May 4 16:23:56 svr-1 postfix/qmgr[2076]: B811CE087D8: from=, size=2404, nrcpt=1 (queue active)
May 4 16:23:56 svr-1 postfix/smtp[5063]: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused
May 4 16:23:56 svr-1 postfix/smtp[5063]: B811CE087D8: to=, relay=none, delay=139062, delays=139062/0.02/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)
May 4 16:25:02 svr-1 imapd: Connection, ip=[::ffff:127.0.0.1]
May 4 16:25:02 svr-1 imapd: Disconnected, ip=[::ffff:127.0.0.1], time=0
May 4 16:25:02 svr-1 pop3d: Connection, ip=[::ffff:127.0.0.1]
May 4 16:25:02 svr-1 pop3d: Disconnected, ip=[::ffff:127.0.0.1]
May 4 16:25:02 svr-1 postfix/smtpd[5155]: connect from svr-1[127.0.0.1]
May 4 16:25:02 svr-1 postfix/smtpd[5155]: lost connection after CONNECT from svr-1[127.0.0.1]
May 4 16:25:02 svr-1 postfix/smtpd[5155]: disconnect from svr-1[127.0.0.1]
May 4 16:26:27 svr-1 postfix/smtpd[5155]: warning: 189.4.112.48: hostname bd047030.virtua.com.br verification failed: Name or service not known
May 4 16:26:27 svr-1 postfix/smtpd[5155]: connect from unknown[189.4.112.48]
May 4 16:26:28 svr-1 postfix/smtpd[5155]: 1ED4CE087E6: client=unknown[189.4.112.48]
May 4 16:26:28 svr-1 postfix/smtpd[5155]: warning: 1ED4CE087E6: queue file size limit exceeded
May 4 16:26:28 svr-1 postfix/smtpd[5155]: disconnect from unknown[189.4.112.48]
May 4 16:28:03 svr-1 postfix/smtpd[5155]: warning: 189.4.112.48: hostname bd047030.virtua.com.br verification failed: Name or service not known


Regards Carlo

falko
5th May 2009, 20:05
May 4 16:18:56 svr-1 postfix/smtp[4835]: 4721AE087CA: to=, relay=none, delay=147552, delays=147552/0.02/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)

It seems as if amavisd isn't running. What's the output of netstat -tap?

The-Ghost
6th May 2009, 09:30
This is wath I get

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address Stat e PID/Program name
tcp 0 0 svr-1:10025 *:* LIST EN 2066/master
tcp 0 0 *:mysql *:* LIST EN 1898/mysqld
tcp 0 0 *:50351 *:* LIST EN 1544/rpc.statd
tcp 0 0 *:sunrpc *:* LIST EN 1531/rpcbind
tcp 0 0 *:ndmp *:* LIST EN 2239/perl
tcp 0 0 *:8050 *:* LIST EN 2198/sc_serv
tcp 0 0 *:8051 *:* LIST EN 2198/sc_serv
tcp 0 0 *:ftp *:* LIST EN 2102/pure-ftpd (SER
tcp 0 0 svr-1:domain *:* LIST EN 1922/mydns
tcp 0 0 *:ssh *:* LIST EN 1807/sshd
tcp 0 0 *:smtp *:* LIST EN 2066/master
tcp 0 0 svr-1:36205 svr-1:mysql ESTA BLISHED 28555/smtp
tcp 0 0 svr-1:8050 s5591fcf1.adsl.wanado:65008 TIME _WAIT -
tcp 0 1924 svr-1:ssh s5591fcf1.adsl.wanado:64956 ESTA BLISHED 28513/0
tcp 0 0 svr-1:8051 s5591fcf1.adsl.wanado:64056 ESTA BLISHED 2198/sc_serv
tcp 0 0 svr-1:mysql svr-1:36205 ESTA BLISHED 1898/mysqld
tcp 0 0 svr-1:mysql svr-1:36204 ESTA BLISHED 1898/mysqld
tcp 0 0 svr-1:36204 svr-1:mysql ESTA BLISHED 28554/smtp
tcp 0 0 *:imaps *:* LIST EN 1998/couriertcpd
tcp 0 0 *:pop3s *:* LIST EN 2010/couriertcpd
tcp 0 0 *:pop3 *:* LIST EN 2004/couriertcpd
tcp 0 0 *:imap *:* LIST EN 1991/couriertcpd
tcp 0 0 *:sunrpc *:* LIST EN 1531/rpcbind
tcp 0 0 *:http *:* LIST EN 2092/httpd
tcp 0 0 *:81 *:* LIST EN 2092/httpd
tcp 0 0 *:ftp *:* LIST EN 2102/pure-ftpd (SER
tcp 0 0 localhost6.localdoma:domain *:* LIST EN 1922/mydns
tcp 0 0 *:ssh *:* LIST EN 1807/sshd
tcp 0 0 *:smtp *:* LIST EN 2066/master
tcp 0 0 *:https *:* LIST EN 2092/httpd
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64961 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64962 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64966 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64964 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64965 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64967 TIME _WAIT -
tcp 0 0 svr-1:http s5591fcf1.adsl.wanado:64963 TIME _WAIT -

falko
7th May 2009, 15:55
Yes, amavisd isn't running. Please start it.

The-Ghost
7th May 2009, 18:16
Hi Falko,

When I try to start amavisd whit /etc/rc.d/init.d/amavisd start
Then I got an error, I take a look in the conf file and cannot find the problem



[root@svr-1 ~]# /etc/rc.d/init.d/amavisd start
Starting amavisd: The value of variable $myhostname is "svr-1", but should have been
a fully qualified domain name; perhaps uname(3) did not provide such.
You must explicitly assign a FQDN of this host to variable $myhostname
in amavisd.conf, or fix what uname(3) provides as a host's network name!
[FAILED]

till
8th May 2009, 10:54
The problem is that you did not specify a fully qualified domain name (fqdn) as you installed your linux distribution. a fqdn is something like svr-1.yourdomain.tld

Edit the file /etc/hostname so that it contains a fqdn and then run the command

/etc/init.d/hostname.sh

and then try to start amavisd again.

The-Ghost
8th May 2009, 21:58
When I try to edit the file /etc/hostname than I create a new file.

The /etc/init.d/hostname.sh command gives -bash: /etc/init.d/hostname.sh: No such file or directory.

I'm running a fedora 10 system, in the setup of fedora I give the complete domain name svr-1.future-webdiensten.nl

Regards Carlo

falko
9th May 2009, 15:22
You can set the correct one like this:

echo server1.example.com > /etc/hostname
/bin/hostname -F /etc/hostname

To have the system set the correct hostname whenever you boot the system, we add the last command to /etc/rc.local:

vi /etc/rc.local

[...]
/bin/hostname -F /etc/hostname

The-Ghost
10th May 2009, 15:32
Hi,

I did al above, amavisd will start without errors, but there is still no mail in the mailboxes

May 10 14:08:03 svr-1 postfix/qmgr[2091]: DC3C3E087EF: from=, size=3202, nrcpt=1 (queue active)
May 10 14:08:03 svr-1 postfix/cleanup[31072]: E06B9E08802: message-id=<20090510120803.E06B9E08802@svr-1.future-webdiensten.nl>
May 10 14:08:03 svr-1 postfix/cleanup[31072]: warning: E06B9E08802: queue file size limit exceeded
May 10 14:08:03 svr-1 postfix/qmgr[2091]: 7B2C0E087EB: status=deferred (bounce failed)
May 10 14:08:03 svr-1 postfix/qmgr[2091]: 7B2C0E087EB: from=, status=expired, returned to sender
May 10 14:08:04 svr-1 postfix/cleanup[31075]: E5C8BE0880A: message-id=<20090510120803.E5C8BE0880A@svr-1.future-webdiensten.nl>
May 10 14:08:04 svr-1 postfix/cleanup[31075]: warning: E5C8BE0880A: queue file size limit exceeded
May 10 14:08:04 svr-1 postfix/qmgr[2091]: CFDF5E087D1: status=deferred (bounce failed)
May 10 14:08:04 svr-1 postfix/qmgr[2091]: CFDF5E087D1: from=, status=expired, returned to sender
May 10 14:08:04 svr-1 postfix/cleanup[31072]: 03057E08802: message-id=<20090510120804.03057E08802@svr-1.future-webdiensten.nl>
May 10 14:08:04 svr-1 postfix/cleanup[31072]: warning: 03057E08802: queue file size limit exceeded
May 10 14:08:04 svr-1 postfix/qmgr[2091]: 7B2C0E087EB: status=deferred (bounce failed)
May 10 14:08:04 svr-1 postfix/cleanup[31079]: F02F2E0880B: message-id=<20090510120803.F02F2E0880B@svr-1.future-webdiensten.nl>
May 10 14:08:04 svr-1 postfix/cleanup[31079]: warning: F02F2E0880B: queue file size limit exceeded
May 10 14:08:04 svr-1 postfix/qmgr[2091]: DC3C3E087EF: status=deferred (bounce failed)
May 10 14:08:04 svr-1 postfix/qmgr[2091]: DC3C3E087EF: from=, status=expired, returned to sender
May 10 14:08:04 svr-1 postfix/cleanup[31075]: 084B0E08802: message-id=<20090510120804.084B0E08802@svr-1.future-webdiensten.nl>
May 10 14:08:04 svr-1 postfix/cleanup[31075]: warning: 084B0E08802: queue file size limit exceeded
May 10 14:08:04 svr-1 postfix/qmgr[2091]: CFDF5E087D1: status=deferred (bounce failed)
May 10 14:08:04 svr-1 postfix/cleanup[31072]: 0ADFEE08802: message-id=<20090510120804.0ADFEE08802@svr-1.future-webdiensten.nl>
May 10 14:08:04 svr-1 postfix/cleanup[31072]: warning: 0ADFEE08802: queue file size limit exceeded
May 10 14:08:04 svr-1 postfix/qmgr[2091]: DC3C3E087EF: status=deferred (bounce failed)

falko
11th May 2009, 14:18
Can you delete all messages in the queue...
postsuper -d ALL
... and try again?

The-Ghost
11th May 2009, 19:41
There is something hapening, but now is the mail rejected, I'm realy shure the mail box is created, I can logon to it in SquirrelMail

This is the mail system at host svr-1.future-webdiensten.nl.

I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can delete your own text from the attached returned message.

The mail system

<info@future-webdiensten.nl>: user unknown. Command output: Invalid user
specified.





May 11 18:35:00 svr-1 amavis[6177]: (06177-06) do_ascii: Decoding part p001
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) do_ascii: Setting sigaction handler, was 0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) timer set to 320 s (was 480 s)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) do_ascii: Decoding part p001 (0 items), uulib V0.5pl20
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) prolong_timer do_ascii: timer set to 480 s
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) decompose_part: p001 - atomic
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) prolong_timer parts_decode: remaining time = 480 s
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(bypass_header_checks) "info@future-webdiensten.nl" result=0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (bypass_header_checks) => false, "info@future-webdiensten.nl" matches, result="0", matching_key="/cached/"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) check_header: 0, OK
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(bypass_header_checks) "info@future-webdiensten.nl" result=0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (bypass_header_checks) => false, "info@future-webdiensten.nl" matches, result="0", matching_key="/cached/"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) Checking for banned types and filenames
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(bypass_banned_checks) "info@future-webdiensten.nl" result=0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (bypass_banned_checks) => false, "info@future-webdiensten.nl" matches, result="0", matching_key="/cached/"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(banned_rulenames) "info@future-webdiensten.nl" result=undef
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(banned_rulenames) "info@future-webdiensten.nl" result=undef
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup: (scalar) matches, result="DEFAULT"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (banned_filename), 1 matches for "info@future-webdiensten.nl", results: "(constant:DEFAULT)"=>"DEFAULT"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) collect banned table[0]: info@future-webdiensten.nl, tables: DEFAULT=>Amavis::Lookup::RE=ARRAY(0xa55aca4)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) starting banned checks - traversing message structure tree
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) check_for_banned (p001) text/plain,.asc
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) doing banned check for info@future-webdiensten.nl on text/plain,.asc
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_re(["text/plain",".asc"]), no matches
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (check_bann:info@future-webdiensten.nl) => undef, ["text/plain",".asc"] does not match
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) p.path info@future-webdiensten.nl: "P=p001,L=1,M=text/plain,T=asc"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) banned check: any=0, all=N (1)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_re("MAIL"), no matches
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (keep_decoded_original) => undef, "MAIL" does not match
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) Using ClamAV-clamd: (built-in interface)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) timer set to 320 s (was 480 s)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ask_av (ClamAV-clamd): query template1: CONTSCAN {}\n
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) Using (ClamAV-clamd) on dir: CONTSCAN /var/spool/amavisd/tmp/amavis-20090511T150157-06177/parts\n
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) timer set to 10 s (was 320 s)
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ClamAV-clamd: Connecting to socket /var/spool/amavisd/clamd.sock
May 11 18:35:00 svr-1 clamd[1940]: SelfCheck: Database status OK.
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ClamAV-clamd: Sending CONTSCAN /var/spool/amavisd/tmp/amavis-20090511T150157-06177/parts\n to UNIX socket /var/spool/amavisd/clamd.sock
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) prolong_timer ask_daemon_internal: timer set to 256 s
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ask_av (ClamAV-clamd) result: /var/spool/amavisd/tmp/amavis-20090511T150157-06177/parts: OK\n
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ask_av (ClamAV-clamd): /var/spool/amavisd/tmp/amavis-20090511T150157-06177/parts CLEAN
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) ClamAV-clamd result: clean
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) prolong_timer run_av: timer set to 480 s
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(bypass_virus_checks) "info@future-webdiensten.nl" result=0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (bypass_virus_checks) => false, "info@future-webdiensten.nl" matches, result="0", matching_key="/cached/"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(bypass_spam_checks) "info@future-webdiensten.nl" result=0
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (bypass_spam_checks) => false, "info@future-webdiensten.nl" matches, result="0", matching_key="/cached/"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) wbl: checking sender
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(id) "info@future-webdiensten.nl" result=1
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_sql_field(id) "info@future-webdiensten.nl" result=3
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup, 2 matches for "info@future-webdiensten.nl", results: "/cached/"=>"1", "/cached/"=>"3"
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) wbl: (SQL) recip , 2 matches
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup_acl(info@futurefm.nl), no match
May 11 18:35:00 svr-1 amavis[6177]: (06177-06) lookup (local_domains) => undef, "info@futurefm.nl" does not match
May 11 18:35:01 svr-1 amavis[6177]: (06177-06) query_keys: info@futurefm.nl, @futurefm.nl, @.futurefm.nl, @.nl, @.
May 11 18:35:01 svr-1 amavis[6177]: (06177-06) lookup_sql "info@futurefm.nl", query args: "1", "info@futurefm.nl", "@futurefm.nl", "@.futurefm.nl", "@.nl", "@."

falko
12th May 2009, 19:40
What's in /etc/postfix/master.cf?

The-Ghost
12th May 2009, 19:43
This is a copy of the master.cf

#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - n - - smtpd
#submission inet n - n - - smtpd
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
# -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - n - - smtp
-o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
retry unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
scache unix - - n - 1 scache
#
# ================================================== ==================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ================================================== ==================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=R user=vmail argv=/usr/bin/maildrop -d ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender}
#
# ================================================== ==================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
#
# ================================================== ==================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# ================================================== ==================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp unix - n n - - pipe
# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ================================================== ==================
#
# Other external delivery methods.
#
#ifmail unix - n n - - pipe
# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp unix - n n - - pipe
# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix - n n - 2 pipe
# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
# ${nexthop} ${user} ${extension}
#
#mailman unix - n n - - pipe
# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
# ${nexthop} ${user}

amavis unix - - - - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes

127.0.0.1:10025 inet n - - - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,rej ect
-o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes
-o receive_override_options=no_unknown_recipient_chec ks,no_header_body_checks
-o smtpd_bind_address=127.0.0.1


Regards Carlo

falko
13th May 2009, 13:11
Please change
maildrop unix - n n - - pipe
flags=R user=vmail argv=/usr/bin/maildrop -d ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender}
to
maildrop unix - n n - - pipe
flags=R user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
and restart Postfix.

The-Ghost
13th May 2009, 16:22
Hi Falko,

Thanx a lot,
It works fine now

Regards Carlo

The-Ghost
23rd May 2009, 22:36
Hi,

After running a complete yum update on my Fedorra 10 installation, there is no mail anymore to the mail boxes.

Please help me what I can do.

Regards Carlo

The-Ghost
23rd May 2009, 22:37
After starting amavis it's working again, how can I start amavis automaticly ?

Carlo

falko
24th May 2009, 21:08
What's the output of chkconfig --list?

The-Ghost
24th May 2009, 21:57
Hi Falko, when I try to copy the output to this site I get warnings that I try to sent to many pictures, so the outpus is an txt file on http://www.future-webdiensten.nl/checkconfig.txt

Regards Carlo

falko
25th May 2009, 13:57
amavisd 0:off 1:off 2:on 3:on 4:off 5:on 6:off
amavisd should start automatically on boot-up.

evani
25th May 2009, 15:10
hello,


After running a complete yum update on my fedorra 10 installation, there is no mail anymore to the mail boxes.

evani

Lawyer Directory (http://www.legalx.net)

falko
26th May 2009, 23:53
Probably because the Courier and Postfix packages that you built during this guide: http://www.howtoforge.com/perfect-server-fedora-10-ispconfig-3-p4 got replaced. You will have to rebuild these RPMs.